Report presenting an investigation in the 20-foot wind tunnel to determine the drag, propulsive and net efficiencies, and cooling characteristics of several scale-model arrangements of air-cooled radial-engine nacelles and present-day propellers in front of an 18-percent-thick, 5-by-15-foot airfoil. Two 3-blade propellers with differing diameters were tested in conjunction with a 12-inch-diameter nacelle in three positions in front of the wing and with a 16-inch-diameter nacelle in six positions in front of the wing. Lift, drag, cooling-air flow, and propeller characteristics were determined for each arrangement.

Report presenting an investigation of the flow of ice-inhibiting fluids over the blade surfaces of a 12.5-foot-daimeter propeller in flight by discharging dyed fluids at various stations along the leading edges of the blades. The effects on the distribution of varying the fluid composition, the blade-surface roughness, and the orifice design were also observed.

Note presenting an investigation in the 7- by 10-foot wind tunnel of an NACA 23021 airfoil with two arrangements of a 40-percent-chord slotted flap. The effect of slot shape, flap position, and flap deflection on the section aerodynamic characteristics was determined. Results regarding coefficients, precision, plain airfoils, and slotted-flap arrangements are provided.

The results of a research program to obtain design data on the strength of open-channel aluminum-alloy sections subjected to combined column and beam action. The results of the tests of about 70 specimens were graphed for stresses due to axial load and stresses due to bending loading as functions of length to radius of gyration of the specimens. From these graphs a design chart was derived that is suitable for ready use.

Note presenting testing of an N.A.C.A. 23012 rectangular wing with rounded tips in combination with a fuselage of circular cross section at several angles of yaw in the NACA 7- by 10-foot wind tunnel. The model was tested as a high-wing, a midwing, and a low-wing monoplane; for each wing location, tests were made with two amounts of dihedral and with partial-span split flaps. Results regarding the wing and fuselage, fin and fuselage, and wing, fuselage, and fin are provided.

Technical note presenting the design and use of a spring-loaded tautness meter that can be used in both horizontal and vertical positions to compare the tautness of various panels. Results of tests made on the fabric coverings of various airplanes are reported and discussed.

Monthly report documenting orders, opinions, and other legal statements issued by the Office of the Attorney General in Texas.

"Simultaneous measurements were made of the speed of flame and the rise in pressure during explosions of mixtures of carbon monoxide, normal heptane, iso-octane, and benzene in a 10-inch spherical bomb with central ignition. From these records, fundamental properties of the explosive mixtures, which are independent of the apparatus, were computed. The transformation velocity, or speed at which flame advances into and transforms the explosive mixture, increases with both the temperature and the pressure of the unburned gas" (p. 39).

Engine knock is, as is known, preceded by normal burning of the first part of the charge, and only the part burned last (residual charge), knocks. The aim of the present measurements was, first, to reexamine the combustion form in this residual charge, because of the absence of uniform and frequently contradictory results in the very extensive literature on the subject. On top of that, an attempt was to be made to gain a deeper insight into the mechanism accompanying the combustion process, by means of the electrical test equipment perfected in recent years.

The present report deals with six-component measurements in the small tunnel of the DVL on a model of the BFW-M 27b(sub 1), which were made to determine the effect of rolling and yawing on the air forces and moments. The wind was given a spiral motion by means of a rotating screen, the model being suspended in the conventional manner. The lack of accuracy in the measurement of the rolling-yawing moments was very noticeable.

"The optimum circulation distribution and hence the maximum theoretical thrust obtainable for contra-vanes fitted behind propellers is markedly dependent on the number of guide vanes. The outer portion of the vanes, even if projecting considerably beyond the edge of the propeller slipstream, still contribute appreciably to this theoretical gain of thrust. But, owing to the always existing friction of the vanes, the limit of the optimum vane length lies at relatively small diameters" (p. 1).

As no investigation of supercharging in 2-stroke-cycle engines has been published up to the present, this article is an attempt in that direction, with a view to establishing the mathematical principles and the constructive rules for the design of such engines.

"The present report is a study of the dynamic stability of a helicopter with hinged rotor blades under hovering conditions. While in this case perfect stability can in general not be obtained it is possible by means of design features to prolong the period of the spontaneous oscillations of the helicopter and reduce their amplification, and so approximately assure neutral equilibrium. The possibility of controlled stability of a helicopter fitted with hinged blades is proved by the successful flights of various helicopters, particularly of the Focker FW61 helicopter" (p. 1).

"An electrical-type meter has been developed for measuring mass rates of flow of gasoline or other nonconducting fluids. Its temperature dependence is small over a large range and it has no known vibrational or viscosity errors. The maximum temperature rise is less than 5 C. The rates of flow, measurable within 1% with the present instrument, are approximately 100 to 1,000 or more pounds of gasoline per hour when a potentiometer is used, or 100 to 300 pounds per hour when a deflection-type meter is used" (p. 1).

"An investigation was conducted in the N.A.C.A. 20-foot wind tunnel to determine the drag, the propulsive and net efficiencies, and the cooling characteristics of several scale-model arrangements of air-cooled radial-engine nacelles and present-day propellers in front of an 18- percent-thick, 5- by 15-foot airfoil. This report deals with an investigation of wing-nacelle arrangements simulating the geometric proportions of airplanes in the 40,000- to 70,000- pound weight classification and having the nacelles located in the vicinity of the optimum location determined from the earlier tests" (p. 1).

"When an airplane is operating at high altitude, it is necessary to use a supercharger to maintain ground pressure at the carburetor inlet. This maintenance and high intake-manifold pressure tends to keep the power output of the engine at ground-level value. The air, being compressed by the supercharger, however, is heated by adiabatic compression and friction to a temperature that seriously affect the performance of the engine. It is thus necessary to use an intercooler to reduce the temperature of the air between the supercharger outlet and the carburetor inlet" (p. 1).