During an attempt to raise control rods from the 100 K reactor in December, one rod could not be withdrawn. Subsequent investigation revealed that a small button'' in the latch mechanism had broken off of the lock plunger'' and was wedged in a position that prevented rod withdrawal. Concern that this failure may have resulted from corrosion or some other metallurgical problem resulted in a request that SRL examine six typical latch mechanisms from the 100 L reactor by use of radiography and metallography. During the examination of the L-Area latches, a failed latch mechanism from the 100 K reactor was added to the investigation. Fourteen latches that had a history of problems were removed from K-Area and sent to SRL for inclusion in this study the week after the original seven assemblies were examined, bringing the total of latch assemblies discussed in this report to twenty one. Results of the examination of the K-Area latch that initiated this study is not included in this report.

The DOE Cooperative Agreement No. DE-FC22-91PC90550 dated March 11, 1991, Public Service Company of Colorado has prepared the following quarterly report for Phases I, IIA, and IIB of the Integrated Dry NO{sub x}SO{sub 2} Emissions Control System Project. This project includes low NO{sub x} burners with NO{sub x} ports (post firing air injection), humidification and dry sorbent injection.

The energy consumed in distillation processes in the United States represents nearly three percent of the total national energy consumption. If effective control of distillation columns can be accomplished, it has been estimated that it would result in a reduction in the national energy consumption of 0.3%. Real-time control based on mixture composition could achieve these savings. However, the major distillation processes represent diverse applications and at present there does not exist a proven on-line chemical composition sensor technology which can be used to control these diverse processes in real-time. This report presents a summary of the findings of the second phase of a three phase effort undertaken to develop an on-line real-time measurement and control system utilizing Raman spectroscopy. A prototype instrument system has been constructed utilizing a Perkin Elmer 1700 Spectrometer, a diode pumped YAG laser, two three axis positioning systems, a process sample cell land a personal computer. This system has been successfully tested using industrially supplied process samples to establish its performance. Also, continued application development was undertaken during this Phase of the program using both the spontaneous Raman and Surface-enhanced Raman modes of operation. The study was performed for the US Department of Energy, Office …

A computer program based on the discrete element method has been developed and validated to compute friction factors and Nusselt numbers for fully developed turbulent flow and heat transfer in pipes with three-dimensional roughness elements. Computational results are compared with appropriate cases from heat transfer experiments in the literature. The predictions were in general in very good agreement with the experimental data.

Analytic calculations of the magnetic fields available to magnetic diagnostics are performed for tokamaks with circular and elliptical cross sections. The explicit dependence of the magnetic fields on the poloidal beta and internal inductances is sought. For tokamaks with circular cross sections, Shafranov's results are reproduced and extended. To first order in the inverse aspect ratio expansion of the magnetic fields, only a specific combination of beta poloidal and internal inductance is found to be measurable. To second order in the expansion, the measurements of beta poloidal and the internal inductance are demonstrated to be separable but excessively sensitive to experimental error. For tokamaks with elliptical cross sections, magnetic measurements are found to determine beta poloidal and the internal inductance separately. A second harmonic component of the zeroth order field in combination with the dc harmonic of the zeroth order field specifies the internal inductance. The internal inductance in hand, measurement of the first order, first harmonic component of the magnetic field then determined beta poloidal. The degeneracy implicit in Shafranov's result (i.e. that only a combination of beta poloidal and internal inductance is measurable for a circular plasma cross section) reasserts itself as the elliptic results are collapsed to …

The objective of this DOE Cooperative Agreement is to conduct a cost-shared clean coal technology project to demonstrate the feasibility of circulating fluidized bed combustion technology and to evaluate economic, environmental, and operational benefits of CFB steam generators on a utility scale. At the conclusion of the Phase 2 program, testing related to satisfying these objectives was completed. Data analysis and reporting are scheduled for completion by October 1991. (VC)

The DOE Cooperative Agreement No. DE-FC22-91PC90550 dated march 11, 1991, Public Service Company of Colorado has prepared the following quarterly report for Phases I, IIA, and IIB of the Integrated Dry No{sub x}/SO{sub 2} Emissions Control System Project. This project includes low NO{sub x} burners with NO{sub x} ports (post firing air injection), humidification and dry sorbent injection.

This report contains a technical progress summary of the research conducted under the auspices of DOE Grant No. DE-FG0291ER-40648. Experimental and Theoretical Investigations of High Gradient Acceleration.'' This grant supports three research tasks: Task A consists of the design and fabrication of a 17GHz of photocathode gun, Task B supports the testing of high gradient acceleration using a 33GHz structure, and Task C comprises theoretical investigations, both in support of the experimental tasks and on critical physics issues for the development of high energy linear colliders. This report is organized as follows. The development of an rf gun design and research progress on the picosecond laser system is summarized in Sec. 2, the status of the studies of the LBL/Haimson high gradient structure, using a 50 MW free-electron laser is summarized in Sec. 3, and theoretical research progress is described in Sec. 4. Supporting material is contained in Appendices A-G.

The purpose of this document is to present environmental monitoring data collected during the US DOE Limestone Injection Multistage Burner (LIMB) Demonstration Project Extension. The objective of the LIMB program is to demonstrate the sulfur dioxide (SO{sub 2}) and nitrogen oxide (NO{sub x}) emission reduction capabilities of the LIMB system. The LIMB system is a retrofit technology to be used for existing coal-fired boilers equipped with electrostatic precipitators. (VC)

This report is a progress report for the Savannah River Laboratory for the month of February 1992. The progress and activities in six categories were described in the report. The categories are reactor, tritium, separations, environmental, waste management, and general. Each category described numerous and varied activities. Some examples of these activities described are such things as radiation monitoring, maintenance, modifications, and remedial action.

A summary of the work is excerpted here. Final design of an MHD channel for the ITC program POC test has been completed. The channel was designed to be capable of 1.5 MW {sub e} power output and a lifetime of 2000 hours. Emphasis was placed upon durability and reliability. Hence, specific measures were taken to design against channel damage due to electric faults. The life-limiting issues associated with electrochemical corrosion and erosion of gas-side surfaces were addressed by the use of various materials with proven wear characteristics in a coal-fired MHD channel environment. Pitting of prototypical sidewall coupons was observed in the CDIF workhorse testing. The most likely cause of the observed pitting, water leaks resulting from cooling water tube braze failures, has been remedied. New brazing procedures and isolation of the sidebar gas-side material from water contact will prevent sidebar pitting in the prototypical channel. Water-side corrosion tests reported in this quarterly report include the latest results of tungsten-copper elements at controlled pH, heat flux and voltage levels. In the combustion subsystem, efforts continued to focus on understanding and improving the current levels of slag recovery and seed utilization achieved by the combustor. Analytical support was also provided …

Since the introduction of MORT (Management Oversight and Risk Tree) technology as a tool for evaluating the success or failure of safety management systems, there has been a proliferation of analytic trees throughout US Department of Energy (DOE) and its contractor organizations. Standard fault tree'' symbols have generally been used in logic diagram or tree construction, but new or revised symbols have also been adopted by various analysts. Additionally, a variety of numbering systems have been used for event identification. The consequent lack of standardization has caused some difficulties in interpreting the trees and following their logic. This guide seeks to correct this problem by providing a standardized system for construction and use of analytic trees. Future publications of the DOE System Safety Development Center (SSDC) will adhere to this guide. It is recommended that other DOE organizations and contractors also adopt this system to achieve intra-DOE uniformity in analytic tree construction.

By means of the unsteady-flow theory and a bilinear mathematical model, a theoretical study is presented for chaotic vibrations associated with the fluidelastic instability of nonlinearly supported tubes in a crossflow. Effective tools, including phase portraits, power spectral density, Poincare maps, Lyapunov exponent, fractal dimension, and bifurcation diagrams, are utilized to distinguish periodic and chaotic motions when the tubes vibrate in the instability region. The results show periodic and chaotic motions in the region corresponding to fluid-damping-controlled instability. Nonlinear supports, with symmetric or asymmetric gaps, significantly affect the distribution of periodic, quasiperiodic, and chaotic motions of a tube exposed to various flow velocities in the instability region of the tube-support-plate-inactive mode.

This report consists of the testimony by J. William Currie, Manager, Energy Systems Modernization Office, Battelle, Pacific Northwest Laboratories before The Senate Committee on Governmental Affairs, Washington, DC on February 18, 1992. He states It is a pleasure to have the opportunity to talk with this distinguished committee about energy conservation technologies and policies, especially as they relate to federal energy use and the commercialization of energy-efficiency technologies. Clearly, using energy more efficiently offers the potential for tremendous cost savings and environmental benefits in the United States and throughout the rest of the world. The challenge, especially with regard to the federal sector, is to lay the foundation for ensuring that the citizens of our nation realize the maximum savings and environmental benefit over the long run. This is the primary focus of my comments today.''

The macropore structure of chars is a major factor in determining their reactivity during the gasification stage. The major objectives of this contract were to (a) quantify by direct measurements the effect of pyrolysis conditions of the macropore structure, and (b) establish how the macropores affected the reactivity pattern, the ignition behavior and the fragmentation of the char particles during gasification in the regime of strong diffusional limitations. Results from this project provide much needed information on the factors that affect the quality of the solid products (chars) of coal utilization processes (for example, mild gasification processes). The reactivity data will also provide essential parameters for the optimal design of coal gasification processes. (VC)

Many utilities and nonutility parties (NUPs) across the country have tried a new approach to reaching agreement on Demand-Side Management (DSM) program design and policy issues. Through this, which is called the DSM collaborative process, parties who have often been adversaries in the past attempt to reach consensus rather than using traditional litigation to resolve differences. We examined nine cases of DSM collaboration involving 24 utilities and approximately 50 NUPs in 10 states. This is the first comprehensive, in-depth review and assessment of collaboratives and it allows conclusions to be drawn about the collaborative process and the factors that contribute to successful efforts of this type. Collaboratives are described in terms of four major contextual and organizational characteristics: regulatory and legal history, parties involved and parties excluded, collaborative scope, and the collaborative process itself.

During the past decade, both the science program and the experimental facilities at LAMPF have undergone some significant changes. This report is a concise description of the current research initiatives and of new directions being proposed for the future research program at LAMPF. Traditionally the LAMPF physics program has explored nuclear systems with hadronic probes: pions, protons, and neutrons. In recent years the exploitation of the intense lepton beams -- neutrinos and muons -- at LAMPF has received increasing emphasis. Explorations of issues in electroweak physics and precision tests of quantum electrodynamics have been significant areas of experimentation. A new concept of the program is an increased emphasis on the role of weak interactions in hadronic systems. Here the electroweak force is treated as a well-understood interaction, which can be used to reveal the wave functions and properties of hadronic systems. The manifestations of the electroweak force may be discussed either in the language of quarks interacting through the exchange of W and Z bosons or in terms of nucleons interacting through the exchange of mesons described by both strong and weak coupling constants. Taken together, these topics provide a rich and vital program of fundamental interest in nuclear physics. …

There are 122 commercial nuclear facilities from which spent nuclear fuel will be accepted by the Federal Waste Management System (FWMS). Since some facilities share common sites and some facilities are on adjacent sites, 76 sites were identified for the Near-Site Transportation Infrastructure (NSTI) project. The objective of the NSTI project was to identify the options available for transportation of spent-fuel casks from each of these commercial nuclear facility sites to the main transportation routes -- interstate highways, commercial rail lines and navigable waterways available for commercial use. The near-site transportation infrastructure from each site was assessed, based on observation of technical features identified during a survey of the routes and facilities plus data collected from referenced information sources. The potential for refurbishment of transportation facilities which are not currently operational was also assessed, as was the potential for establishing new transportation facilities.

The reactor safety rods may be subjected to high temperatures due to gamma heating after the core coolant level has dropped during the ECS phase of hypothetical LOCA event. Accordingly, an experimental safety rod testing subtask was established as part of a task to address the response of reactor core components to this accident. This report discusses confirmatory separate effects tests conducted to support the evaluation of failures observed in the safety rod thermal tests. As part of the failure evaluation, the potential for liquid metal embrittlement (LME) of the safety rod cladding by cadmium (Cd) -- aluminum (Al) solutions was examined. Based on the test conditions, literature data, and U-Bend tests, its was concluded that the SS304 safety rod cladding would not be subject to LME by liquid Cd-Al solutions under conditions relevant to the safety rod thermal tests or gamma heating accident. To confirm this conclusion, tensile tests on SS304 specimens were performed in both air and liquid Cd-Al solutions with the range of strain rates, temperatures, and loading conditions spanning the range relevant to the safety rod thermal tests and gamma heating accident.

This note is about calculations aimed at quantifying adequate pumping speeds of evacuation of normally humid clean-room air from typical Superconducting Radiofrequency (SRF) cavities. The subject is of high relevance to the semiconductor industry, where the yield of VLSI (Very Large Scale Integration) chip production is affected by micron size particles which may cause fatal defects to their micron and sub-micron features. The recent availability of particle counters capable of operating in vacuum has stimulated measurements at reduced pressures in this subject.

Progress during the past year of research under Measurements of Surface Ocean Carbon Dioxide Partial Pressure During WOCE'' has been significant. As was described in our previous progress report, the startup phase of this research was severely frustrated by delays in the US WOCE Hydrographic Program (WHP), which in turn were caused by delays in the mid-life refit of the R/V Knorr. As a result the high latitude southeastern Pacific work (WHP lines P19S and P16S) originally scheduled for the 1990 austral summer has still not been carried out. As a substitute, the smaller R/V Thomas Washington was pressed into service during mid-1991 to carry out lower-latitude portions of the WHP P16 and P17 lines - the TUNES Expedition. Because this ship is much smaller than the R/V Knorr, she could not carry a full complement of WHP programs and seagoing personnel and was restricted by her size and the time of year to lower-latitude work. Our original proposal for carbon dioxide measurements was designed to divide the work between legs in which we participated as part of the WHP dissolved CFC program (under separate NSF funding) and legs in which we entrusted the operation of our system to other …

Bonneville Power Administration (BPA) provides power to Surprise Valley Electrification Corporation (SVEC) in Modoc County, California. BPA uses PacificCorp's substation and transmission facilities between Alturas and Canby, California to transfer power to SVEC's Canby Substation. In the next year, SVEC expects increased industrial, agricultural, and residential electric loads on their 69-kV transmission system south of Canby. SVEC's substation can accommodate only about 10 percent of the expected additional electric load. BPA's proposed action is intended to meet SVEC's increasing electric load. BPA proposes to meet SVEC's increasing energy load by tapping into BPA's existing BPA Malin-Warner 230-kV transmission line, and building an 7.9-mile transmission line to a new BPA substation. BPA proposes to build the new substation next to the west side of SVEC's Canby Substation (Figure 1). This new substation will allow SVEC to move the additional power over their existing transmission or distribution lines. This report is the environmental assessment of the potential impact of the proposed project. The assessment determined that no environmental impact statement'' is not required.

The general objectives of this research are (1) to investigate the use of highly dispersed catalysts for the pretreatment of coal by mild hydrogenation, (2) to identify the active forms of the catalysts under reaction conditions and (3) to clarify the mechanisms of catalysis. The ultimate objective is to ascertain if mild catalytic hydrogenation resulting in very limited or no coal solubilization is an advantageous pretreatment for the transformation of coal into transportable fuels. The experimental program will focus upon the development of effective methods of impregnating coal with catalysts, evaluating the conditions under which the catalysts are most active and establishing the relative impact of improved impregnation on conversion and product distributions obtained from coal hydrogenation.

This report contains the User's Manual for MORT (Management Oversight and Risk Tree), a logic diagram in the form of a work sheet'' that illustrates a long series of interrelated questions. MORT is a comprehensive analytical procedure that provides a disciplined method for determining the causes and contributing factors of major accidents. Alternatively, it serves as a tool to evaluate the quality of an existing system. While similar in many respects to fault tree analysis, MORT is more generalized and presents over 1500 specific elements of an ideal universal'' management program for optimizing environment, safety and health, and other programs. This User's Manual is intended to be used with the MORT diagram dated February 1992.