A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO reviewed the preparedness of the federal food safety regulatory agencies to respond to acts or threats of deliberate food contamination, including those by terrorists, focusing on the: (1) extent to which food has been deliberately contaminated with a biological agent (bacteria, virus, or toxin) or threatened to be contaminated with such an agent; and (2) plans and procedures that federal food safety regulatory agencies have for responding to threats and acts of deliberate food contamination with a biological agent."

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO reviewed the Department of Defense's (DOD) personnel security investigative functions, focusing on; (1) the completeness and timeliness of DOD personnel security investigations; (2) what factors, if any, might be hindering the completeness and timeliness of the investigations; and (3) what actions DOD has taken to address any program weaknesses."

This project is divided into four tasks. We developed our management plan in Task 1. Task 2, evaluation of mechanisms in FGD sorbent and ash interactions, focuses on characteristics of binary mixtures of these distinct powders. Task 3, evaluation of mechanisms in conditioning agents and ash, is designed to examine effects of various conditioning agents on fine ash particles to determine mechanisms by which these agents alter physical properties of ash. We began Tasks 2 and 3 with an extensive literature search and assembly of existing theories. We completed this phase of the project with publication of two special Topical Reports. Our laboratory analyses during the past quarter covered a variety of topics. We quantified increases in surface area, changes in particle morphology, and increases in cohesivity that result when sorbents are mixed with ashes. Measurements of water content illustrated the increased tendency of the mixtures to adsorb and absorb water. Our analyses of leached and unleached dust cake ashes provided some interesting insights into effects that compounds adsorbed on surfaces of ash particles can have on bulk ash behavior. We also observed the effects that pozzolanic reactions can have on ash resistivity. Initial examinations of outputs of the SRI-EPA …

The composites industry employs a method of high speed continuous reinforcement lay-down called filament winding. This is a process where resin impregnated tows, bundles of filament, are wound over a rotating mandrel. The tows, hereafter referred to as filament, are laid down over the rotating mandrel at a prescribed wind angle. Consider a cylindrical filament winding mandrel with conical features such that the filament is tangent to both the cylinder and the cone simultaneously. A gap is formed between the points of tangency. The gap distance measured along a line normal to the filament and intersecting the mandrel`s axis of rotation. The maximum distance occurs between the filament and a point on the intersection of the cylinder and the cone. The problems this paper addresses are: given a cylindrical filament winding mandrel with conical features, what is the gap size for a given wind angle; conversely what is the wind angle for a given gap size; and what does the geometry need to be in the mandrel transition area between the cylinder cone such that the filament remains in contact with the mandrel at all times?

The Inventory of Power Plants in the United States is prepared annually by the Survey Management Division, Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), US Department of Energy (DOE). The purpose of this publication is to provide year-end statistics about electric generating units operated by electric utilities in the United States (the 50 States and the District of Columbia). The publication also provides a 10-year outlook of future generating unit additions. Data summarized in this report are useful to a wide audience including Congress, Federal and State agencies, the electric utility industry, and the general public. Data presented in this report were assembled and published by the EIA to fulfill its data collection and dissemination responsibilities as specified in the Federal Energy Administration Act of 1974 (Public Law 93-275) as amended. The report is organized into the following chapters: Year in Review, Operable Electric Generating Units, and Projected Electric Generating Unit Additions. Statistics presented in these chapters reflect the status of electric generating units as of December 31, 1992.

The main advantage of the project is that it allowed PTI to gain knowledge and experience about the proper approach, methods and hardware required to properly optimize and control column flotation performance. Many operational problems were incurred during the project, some of that PTI was able to solve during the project and other that must be overcome as the technology is further developed and commercialized. The key operating problems experienced with the KEN-FLOTE{sup TM} Column that must be further researched and overcome include: (1)The low concentrate solids content which limited the throughput capacity of the column, due to high froth washing requirements. The low concentrate solids content also lead to difficulty obtaining accurate On-Line Monitor measurements, due to the poor measurement sensitivity obtained with low solids content samples (particularly less than 5.0 wt %). (2) The higher-than-anticipated reagent dosages that undoubtedly contributed to the low solids content listed above, and also caused foaming problems within PTI`s On-Line Monitor. A defoaming reagent addition (Nalco 7810) was required to provide consistent sample size and reproducible On-Line Monitor counts for the concentrate samples collected within the circuit. PTI and UK`s CAER staff will continue to research alternative column design, particularly alternative air bubble …

The data described in this report were collected as part of a project to explore the viability of passive soil vapor extraction techniques for removal of volatile organic contaminants from the subsurface. The principal objectives of this project are to determine the mechanism and physical dynamics of the relationship between surface atmospheric pressure and subsurface flow and contaminant transport, and to use this information to design cost effective and efficient remediation systems. This work is funded under the Volatile Organic Compounds - Arid Integrated Demonstration (VOC - Arid ID). The purpose of the VOC - Arid ID is to identify, develop, and demonstrate technologies that may be used to characterize, remediate, and/or monitor and or semiarid sites containing VOC (e.g., carbon tetrachloride and trichloroethylene [TCE]) with or without associated metal and radionuclide contamination. The results from this project are applicable at arid, semi-arid, and non-arid sites. This report documents the methods and findings from the Savannah River Site barometric pumping study. The results in this report include: (1) Surface and subsurface pressure measurements and analysis results from the Savannah River Integrated Demonstration Site (SRIDS). (2) Barometric pumping flow data measured and/or estimated from several wells. (3) Continuous concentration and flow …

The purpose of this report is to provide input of thermodynamic data on actinide volatilities to EERC for use in their computer code for modeling of metal volatilities in incinerators. It is also anticipated that the data may be documented later in an EPA sponsored ``Metals Bible.`` It should be noted that only upper limits for the volatility of PuO{sub 2}(s) due to PuO{sub 3}(g) and PuO{sub 2}(OH){sub 2}(g) and the volatility of AmO{sub 2} in PuO{sub 2}(s) due to AmO{sub 3}(g) and AmO{sub 2}(OH){sub 2}(g) could be set. The data on the americium vapor species are intended for calculations where AmO{sub 2} is present as a solid solution in PuO{sub 2}(s).

None

None

This report provides a summary of the radiological surveys performed in support of near-facility environmental monitoring at the Hanford Site. The Third Quarter 1998 survey results and the status of actions required are summarized: (1) All of the eighty-five environmental radiological surveys scheduled during July, August and September were performed as planned. Fifty-one of the surveys were conducted at Project Hanford Management Contractors (PHMC) sites and thirty-four at Environmental Restoration Contractor (ERC) sites. Contamination above background levels was found at seventeen of the PHMC waste sites and two of the ERC waste sites. Contamination levels as high >1,000,000 disintegrations per minute (dpm) per 100 cm{sup 2} were reported. Of these contaminated surveys nine were in Underground Radioactive Material (URM) areas, three were in unposted areas and seven were in contamination areas. The contamination found within four of the URM and three of the CA areas was immediately cleaned up and no further action was required. The remaining five URM and two unposted sites were posted and along with the five CA sites will require remediation. Radiological Problem Reports (RPR's) were issued and the sites were turned over to the landlord for further action as required. (2) During the second quarter …

Quality Process Plan for the Restart of Cell Hot-Work. Addition of Table 4.

The purpose of this document is to compile supporting documentation for the Integrity Assessment Report (HNF 4589) for Tanks 101 and 102 in the 2194 Facility. This approach minimizes the size of the Integrity Assessment Report (IAR) (HNF-4589) and still provide a path to detailed information. This IAR addresses the evaluation of Tanks 101 and 102 and other existing components located in the 219-5 Waste Handling Facility.

This document provides supporting documentation for calculation for the isotopic summation of ratios to determine applicability of NOC DOE/RL-96-75 to mockup activities at the Rockslinger facility in the 200 West area.

This document provides the technical basis for use of remote reading capabilities with radiological control instruments at River Protection Project facilities. The purpose of this document is to evaluate applications of remote reading capabilities with Radiological Control instrumentation to allow continuous monitoring of radiation dose rates at River Protection Project (RPP) facilities. In addition this document provides a technical basis and implementing guidelines for remote monitoring of dose rates and their potential contribution to maintaining radiation exposures ALARA.

This report documents an assessment of the radiation dose workers at the K Basins are expected to receive in the process of removing spent nuclear fuel from the storage basins. The K Basins (K East and K West) are located in the Hanford 100K Area.

The goals of Phase II of the Non Rad Toxics Project were: (1) To identify and quantify the major chemicals comprising smoke from smoldering plastics most prevalent in the LLNL designed weapons as well as materials unique to LANL designed weapons and SANDIA parts found in the LLNL and LANL weapons; and (2) To perform toxic assessment of the identified chemicals using existing literature information or TOPKAT, a computer program designed for toxic assessment of organic and certain organo-metallic compounds. This project was in support of the ARG Program needs No.15, Table XI, Accident Response Group.

This report documents design review of the New Generation Transfer Pump versus the functions and requirements of the SY-101 Rapid Mitigation Project. Previously unpublished documentation for the pump is included in support of the design.

A letter report issued by the General Accounting Office with an abstract that begins "Pursuant to a congressional request, GAO provided information on the Army's purchase of the High Mobility Trailers, focusing on the: (1) factors leading to the substantial increase in the contract unit price of the trailers; (2) reasons the trailers cannot be used as planned and the cost to the Army for required modifications; and (3) Army's acquisition strategy and plans to procure additional trailers."

'Carbon tetrachloride (CCl{sub 4}) has been used extensively within the Department of Energy (DOE) nuclear weapons facilities. Rocky Flats was formerly the largest volume user of CCl{sub 4} in the US, with 5,000 gallons used there in 1977 alone. At the Hanford site, several hundred thousand gallons of CCl{sub 4} were discharged between 1955 and 1973 into underground cribs for storage. Levels of CCl{sub 4} in groundwater at highly contaminated sites at the Hanford. facility have exceeded the drinking water standard of 5 ppb by several orders of magnitude. High levels of CCl{sub 4} at these facilities represent a potential health hazard for workers conducting cleanup operations and for surrounding communities. The level of CCl{sub 4} cleanup required at these sites and associated costs are driven by current human health risk estimates which assume that CCl{sub 4} is a genotoxic carcinogen. The overall purpose of these studies is to improve the scientific basis for assessing the health risk associated with human exposure to CCl{sub 4}. Specifically, the authors will determine the toxicokinetics of inhaled and ingested CCl{sub 4} in F344/Crl rats, B6C3F1 mice, and Syrian hamsters. They will also evaluate species differences in the metabolism of CCl{sub 4} by rats, …

Aqueous radioactive wastes from Savannah River Site separations processes are contained in large underground carbon steel tanks. Inspections made during 1998 to evaluate these vessels and auxiliary appurtenances, along with evaluations based on data accrued by inspections performed since the tanks were constructed, are the subject of this report.

'A new concept for a chemical sensor that demonstrates three modes of selectivity (electrochemistry, spectroscopy, and selective partitioning) is being developed. The spectroelectrochemical sensor consists of an optically transparent electrode (OTE) coated with a selective film. Sensing is based on the change in optical signal of light passing through the OTE that accompanies an electrochemical reaction of the analyte at the electrode surface. Thus, for an analyte to be detected, it must partition into the selective coating, be electrolyzed at the potential applied to the electrode, and either the analyte or its electrolysis product must absorb light at the wavelength chosen. Selectivity for the analyte relative to other solution components is obtained by choice of coating material, electrolysis potential, and wavelength for optical monitoring. The purpose of this new sensor is to significantly broaden the applicability of sensors to real samples by improving selectivity. This high level of selectivity is to be achieved without any fragile biocomponent. The concept is to be demonstrated with a sensor for ferrocyanide.'

This sampling and analysis plan will identify characterization objectives pertaining to sample collection, laboratory analytical evaluation, and reporting requirements for vapor samples and one rotary mode core sample from tank 241-BY-106.

This project is divided into four tasks. We developed our management plan in Task 1. Task 2, evaluation of mechanisms in FGD sorbent and ash interactions, focuses on characteristics of binary mixtures of these distinct powders. Task 3, evaluation of mechanisms in conditioning agents and ash, is designed to examine effects of various conditioning agents on fine ash particles to determine mechanisms by which these agents alter physical properties of ash. We began Tasks 2 and 3 with an extensive literature search and assembly of existing theories. We completed this phase of the project with publication of two special Topical Reports. Our laboratory analyses during the past quarter covered a variety of topics. We quantified increases in surface area, changes in particle morphology, and increases in cohesivity that result when sorbents are mixed with ashes. Measurements of water content illustrated the increased tendency of the mixtures to adsorb and absorb water. Our analyses of leached and unleached dust cake ashes provided some interesting insights into effects that compounds adsorbed on surfaces of ash particles can have on bulk ash behavior. We also observed the effects that pozzolanic reactions can have on ash resistivity. Initial examinations of outputs of the SRI-EPA …