"Two short turbojet combustors designed for use with vaporized hydrocarbon fuels were tested in a one-quarter annular duct. The experimental combustors consisted of many small "swirl-can" combustor elements manifolded together. This design approach allowed the secondary mixing zone to be considerably reduced over that of conventional combustors" (p. 1).

This document provides the conclusions and recommendations of the study of purging of surface condenser tubes. (FI)

Report discussing an investigation of the stability of a series of flared-body and blunted-cone models at a range of Mach numbers. Increasing the flare length was found to increase static stability and the damping in pitch. The Reynolds number was found to have a large effect on static stability at lower Mach numbers, but little effect on the higher end of the range covered in testing.

Memorandum presenting an investigation of the performance of a semielliptical scoop inlet with a two-dimensional flow field at the design Mach number of 2.0. The investigation included a study of the effects of inlet-leading-edge shape and boundary-layer bleed on the pressure recovery and total-pressure distribution. Results regarding performance of inlets without boundary-layer bleed, effect of diverter boundary-layer bleed, effect of leading-edge sweep angle, effect of compression-surface bleed, performance of inlet III-B, tests of buzz suppressors, and tests of rearward-facing control tubes are provided.

Report presenting the aerodynamic characteristics of a new type of lateral control through a range of Mach numbers. The control consisted of airfoils mounted vertically at the tips of the wing and could be rotated to induce rolling moments or lift on the wing surface. Results regarding lateral-control characteristics and lift-control characteristics are provided.

Report presenting an investigation of some effects of Reynolds number on the stability of a series of flared-body and blunted-cone models at a range of Mach numbers in three wind tunnels. The Reynolds number had a pronounced effect on the static stability of the flared-body models at the lower Mach numbers. Results regarding the static stability and damping in pitch are provided.

Memorandum presenting an investigation of the distortion removal performance and associated total-pressure-loss characteristics of several freely rotating fans, three single-stage and two double-stage freely rotating fans over a range of radial and circumferential distortions of from 0 to 20 percent at inlet annulus Mach numbers from 0.30 to about 0.60. Results regarding individual fan performance, comparison of fan distortion removal characteristics, and fan total-pressure loss and operating speed characteristics are provided.

"A program was conducted in an altitude facility at the NACA Lewis laboratory to investigate the effects of rapid inlet pressure oscillations on the operation of a current turbo jet engine. These pressure oscillations were approximately sinusoidal in form and were generated to cover a frequency range of 2 to 75 cycles per second and an amplitude range of 10 to 70 percent of the free-stream total pressure. As the oscillation progressed through the compressor, the amplitude was attenuated considerably and a relatively large phase shift (lag) occurred" (p. 1).

"Formulas are given to express the general particle trajectory and the equilibrium orbit for a slightly disturbed synchrotron in terms of the amplitude and phase functions for the ideal machine. If these functions are known, orbit computations can be carried out by simple integration procedures. The formalism is expected to be useful especially for considerations such as beam alignment or generation of an external electron beam. Some equations given earlier are repeated for completeness."