The following report describes the high pressure and temperature homogeneous reactor experiment which has been started at Los Alamos, as well as the hazards and safety aspects for the experiments.

Report discussing an experiment testing the severity of attack of an aluminum slug jacket containing one or more spots hotter than the rest of the jacket. These conditions match those likely to exist in a poorly bonded slug.

Abstract: Cadmium ratios for very thin (neutron and beta-wise) foils of thorium, gold, vanadium and indium have been measured in the glory hole of the WBNS. These cadmium ratios, together with the known thermal cross sections and a given calculated resonance integral for gold, were used to evaluare the resonance integrals of thorium, vanadium, and indium.

This report studies the reactions between gaseous uranium hexafluoride and several gaseous reagents for possible analytical application that has been underway while using a buggy designed for gaseous titration studies. This study primarily focuses on methods to analyze gases containing uranium hexafluoride and physically absorbed uranium hexafluoride.

A laboratory test was performed to determine if a 10% oxalic acid solution could be safely be employed as a substitute to 2% chromic acid plus 5% phosphoric acid for removal of corrosion products from aluminum corrosion samples or slugs.

This is the sixteenth quarterly report of the research and development activities of the Radiological Sciences Department, Hanford Atomic Products Operation, as before, includes some items charged to control but included for general interest. Such are identified as "not charged to research."

The usual method of removing surface oxide from plutonium metal samples, by electrolytic cleaning in a mixture of ethylene glycol and phosphoric acid, is not satisfactory for preparing samples for oxygen determination. Samples prepared in this way give erratic oxygen values. This report describes a new method of electrolytic cleaning, using a 20 ~ aqueous potassium carbonate solution as the electrolyte. The sample is placed in a rotating tantalum cup which is made the anode. Electrolysis for two minutes at 4.5 volts is usually sufficient. Samples cleaned by the new method give lower and more consistent oxygen results than those prepared in the old way. The new method is also neater and more convenient.

The purpose of this letter is to point out certain discrepancies between previous work on the decay of Rb82 (6.3 hour, B+, K-capture) and studies made recently at the University of California Radiation Laboratory.

In a section of the area occupied by the Atomic Energy Commission in Grand Junction, Colorado, a pilot plant is being erected to test a resin-in-pulp process. The process is based on the adsorption of uranium by resin from acid pulps. The first ores to be treated at this plant will be Monticello Stockpile Material. Samples of the various stockpiles sere subjected to a series of leaching, filtering and settling tests, the results of which are presented in this report.

This technical report describes work done on the electrolytic refining of natural uranium in fused salt baths composed of various eutectics of alkali metal chlorides in which were dissolved UF, or UCl3.

Ultrasonic inspection for subsurface flaws is widely used in American industry. This report reviews the general principles and specific techniques of ultrasonic testing. The information is based on a review of the technical literature plus the experience of the Quality Assurance Department at Sandia Corporation in applying this nondestructive testing technique to quality evaluation programs.