This report is a progress report detailing operations and ongoing projects at the Brookhaven National Laboratory. The report describes new developments with buildings and progress regarding ongoing experiments. The report includes photographs showing progress in the construction of the reactor and other images and figures that accompany the descriptions of projects.

Introduction: From the inception of the effort to utilize atomic energy Perú has been of interest as a possible source of radioactive raw materials because of its great variety and abundance of metals. Because of this and a desire at that time to develop additional supplies of uranium, a cooperative program to search for uranium deposits was initiated in 1953 by the Junta and the USAEC.

Abstract. thorium can be precipitated as a salt of p-dimethylaminoazophenylarsonic acid at a pH of about 1.5. the precipitate, collected on a sintered glass filter is washed with dilute ammonium hydroxide to dissolve the dye. the amount of thorium is determined by measuring the concentration of the dye spectrophotometrically at a wavelength of 450 millimicrons. Zirconium, which interferes, can be separated and determined using the same reagent in strong hydrochloric. the behavior of thorium metal upon treatment with various acids and upon fusion withKHSO4 is described. three satisfactory procedures are given for dissolving the metal with sulfuric acid, phosphoric acid, and by a potassium hydrogen sulfate fusion. The laboratory was presented with the problem of analyzing for a large number of elements in O2 metal. the results of a systematic study of methods for effecting solution of the metal are offered here since they may be of some interest and use to other laboratories. The four methods which effected complete solution of the metal are (1) Sulfuric acid method; (2) Fusion method; (3) Phosphoric acid method; and (4) Nitric acid-hydrofluoric acid method.

From Abstract : "The thermal diffusivities of pure silicon and of Armco iron have been measures from 300 to 1400°K. The specific heats of the same materials have been measured over the same temperature range."

Report discussing the results of an investigation of a test for statistical consistency of counter-scaler units.

Design and operational techniques are described for a freeze seal type centifugal pump for use in the Sodium Reactor Experiment.

Summary: Heat transfer tests employing the two-rod test section without film tripping devices have been completed. Representations defining critical heat flux, transition boiling and film boiling behavior at high pressures and over a steam quality range of 25 to 90 percent are shown. Fabrication of a new observational test section was completed and initial test results with high-speed motion pictures were obtained. A test loop instability which was found to affect transition boiling behavior was detected and partially eliminated.

"This paper deals with the Riemann function for linear hyperbolic systems of first-order equations. the leading term in the singularity of the Riemann function is determined and interpreted. In addition to equations with distinct characteristics, certain equations with multiple characteristics are treated."

A report about thermal conductivity measurements which are made on uranium, uranium-1.5 w/o zirconium, and zircaloy 2 for a program that aims to determine the feasibility of using clad specimens. Results from the measurements indicate that the difference in thermal conductivity values between uranium and uranium-1.5 w/o zirconium is less than the anticipated 5 percent.

A report about the properties of dilute uranium alloys. The mechanical properties of cold worked sirconium and zircaloy 2 at temperatures up to 500 C ore being determined.

Abstract: The current-carrying capacity of Nb- Zr wire has been studied under conditions of swept magnetic field and fixed wire current and of fixed magnetic field and swept wire current. The effects of wire movement, thermal environment, copper coating of the wire, and rate of sweep of wire current or magnetic field have been determined for these conditions of test.

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Abstract: This technical report contains a summary of analytical and experimental work performed on SM-1 Core II, with special components is presented. The effects of these special assemblies upon power distribution and core reactivity were calculated and compared to experimental measurements. A thermal analysis was conducted to determine steady state and transient performance of the special test components of the core as well as some of the hotter standard Core II components. Experimental work discussed includes individual reactivity effects of all the special elements and the total effect of all of the elements. Power mappings were also made and are reported.

Report containing "flight data and (...) results of radiochemical analyses of stratospheric and tropospheric air filter samples collected during Project Star Dust. This report contains data for samples collected during June 1961 to December 1962, the first year and a half of the project" (p. 2).

Report that summarizes multiple laboratories' reports on global fallout deposition. Reports include data on Strontium-90 deposition recorded by the Health and Safety Laboratory, data from other laboratories, related interpretive reports, and recent publications related to fallout.

Experimental data pertinent to the evaluation of hazards involved in the exposure of personnel to tritium and tritium oxide are reviewed. Conclusions are drawn and recommendations made with regard to the control of these hazards.

The prompt administration of zirconium citrate was at least twice as effective as the prompt administration of calcium disodium salt of ethylenediaminetetraacetic acid (CaEDTA) in preventing deposition of plutonium in the skeleton. On the other hand, CaEDTA was twice as effective as zirconium citrate in preventing the deposition of plutonium in soft tissues. The combined administration of zirconium citrate and CaEDTA was the most effective treatment for preventing the deposition of plutonium in the total rat. Zirconium malate offered no advantage over zirconium citrate, and appeared to be somewhat more toxic. Three doses of the zirconium salts over a four-day period were no more effective than a single dose.

The feasibility of using Teflon bellows as the pulsing device for solvent extraction pulse columns has been previously demonstrated by life test of various sizes of Teflon bellows. This report describes a compact Teflon bellows pulse generator and drive assembly which was designed, built, and tested by the Chemical Development Unit. The pulse generator assembly is suitable for a number of applications where pulse generators are required to pulse solvent extraction columns.

Report documenting radioactive fallout across the world, including material in the atmosphere, on land, and that has deposited into food and water supplies.

Report documenting radioactive fallout across the world, including both material in the atmosphere and that has deposited into food supplies. This appendix includes tables of monthly fallout deposition collections from 116 sites across the Earth and a list of radionuclides and their half-lives.

Report documenting radioactive fallout across the world, including both material in the atmosphere and that has deposited into food supplies. This appendix includes tables of monthly fallout deposition collections from 116 sites across the Earth and a list of radionuclides and their half-lives.

Report documenting radioactive fallout across the world, including both material in the atmosphere and that has deposited into food supplies.

From introduction: "Development of nuclear reactor cores having high power density, long fuel life, and low fabrication costs is the objective of this program sponsored by the AEC."