The DZERO VLPC Cryostat and the Superconducting Solenoid both require an insulating Vacuum of 10{sup -5} Torr or less. There is a vacuum system on the Detector Platform consisting of 2 Turbomolecular vacuum pumps and their associated piping, valves, instrumentation that are dedicated to this task. This vacuum equipment requires an operator interface and control logic in order to function properly. The operator interface allows an operator to monitor, control and configure the proper pumping setup required at any given time. The control logic is needed to protect the Vacumm vessels and Vacuum equipment from catastrophic events that may harm them. This is typically done with interlock chains or strings.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story. This story aired at 5:00 P.M.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Semi-weekly newspaper from Clifton, Texas that includes local, state, and national news along with advertising.

Weekly newspaper from Sulphur Springs, Texas that includes local, state, and national news along with advertising.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

The results from the RELAP5/MOD3 and PARET/ANL codes are compared with the SPERT-IV series of experimental reactivity insertion transients. The PARET/ANL code provides conservative estimates of SPERT-IV experimental data for the midrange transients and for the more severe transients. The PARET results are similar to the results obtained earlier for the SPERT-I D-12/25 series of experiments. The RELAP5/MOD3 code (including the developmental version 3.2.1.2) gives results comparable to PARET for some midrange transients, but seriously diverges from the experimental data when significant boiling is present. Based on the results of this study, the use of the RELAP5 code for research reactor applications should be limited to transients that do not generate substantial boiling and voids. We hope to be able to resolve these differences in further work with the NRC staff and its contractors. The RELAP5 code would be a more useful tool for the analyses research reactor transients with the addition of suitable correlations for low pressures and plate type geometry.

A neutronic feasibility study for converting the High Flux Beam Reactor at Brookhaven National Laboratory from HEU to LEU fuel was performed at Argonne National Laboratory. The purpose of this study is to determine what LEU fuel density would be needed to provide fuel lifetime and neutron flux performance similar to the current HEU fuel. The results indicate that it is not possible to convert the HFBR to LEU fuel with the current reactor core configuration. To use LEU fuel, either the core needs to be reconfigured to increase the neutron thermalization or a new LEU reactor design needs to be considered. This paper presents results of reactor calculations for a reference 28-assembly HEU-fuel core configuration and for an alternative 18-assembly LEU-fuel core configuration with increased neutron thermalization. Neutronic studies show that similar in-core and ex-core neutron fluxes, and fuel cycle length can be achieved using high-density LEU fuel with about 6.1 gU/cm{sup 3} in an altered reactor core configuration. However, hydraulic and safety analyses of the altered HFBR core configuration needs to be performed in order to establish the feasibility of this concept.

The Field Lysimeter Investigations: Low-level Waste Data Base Development Program is obtaining information on the performance of radioactive waste forms. These experiments were recently shut down and have been examined in accordance with a detailed waste form and soil sampling plan. Ion-exchange resins from a commercial nuclear power station were solidified into waste forms using portland cement and vinyl ester-styrene. These waste forms were tested to (a) obtain information on performance of waste forms in typical disposal environments, (b) compare field results with bench leach studies, (c) develop a low-level waste data base for use in performance assessment source term calculations, and (d) apply the DUST computer code to compare predicted cumulative release to actual field data. The program, funded by the Nuclear Regulatory Commission (NRC), includes observed radionuclide releases from waste forms at two test sites over 10 years of successful operation. The lysimeter is a useful experimental device that is providing source term data and can be used to determine waste form stability. Lysimeters are ideal systems for obtaining actual field test data because, when properly designed and operated, they can be used to isolate soil and waste systems under actual environmental conditions. Such conditions cannot be duplicated …

None

Video footage from the KXAS-TV television station in Fort Worth, Texas, covering a news story.

Semiweekly newspaper from Boerne, Texas that includes local, state, and national news along with advertising.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Video footage from the KXAS-TV/NBC station in Fort Worth, Texas, to accompany a news story.

Daily newspaper from Baytown, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Altus, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Chickasha, Oklahoma that includes local, state, and national news along with advertising.

None

Daily newspaper from Sapulpa, Oklahoma that includes local, state, and national news along with advertising.

A shipping and storage container for the Tritium production transportation casks may be required but requirements for protection of the irradiated rods and radioactive contamination have not been finalized. This report documents the various possibilities for the container depending on the final requirements.

A heavy ion linear induction accelerator is considered to be the leading driver candidate for an Inertial Fusion Energy reactor. To deliver a space-charge-dominated beam at the appropriate energy (several GeV), such an accelerator would be several kilometers in length. Since total length has a strong influence on accelerator cost, we are considering the potential advantages and practical implementation of a recirculating induction accelerator. To address the critical scientific and technical challenges of a recirculating space-charge-dominated heavy ion beam, we have begun to develop the elements of a scaled ``small recirculator``. An operating recirculator must demonstrate full beam control including multi-lap operation, beam insertion/extraction, acceleration and pulse compression. At present, experiments have been conducted using a 2mA, 80keV K{sup +} beam transported through a 45{degree} bend; experiments on a 90{degree} bend with five induction modulators will begin soon. This paper briefly summarizes the recirculator specifications and operational features and reports the latest experimental data as well as the developmental status of beam diagnostics.

This effort is a fundamental study of local chemical, electronic and physical behavior of metal and metal oxides as exposed to corrosive gases such as hydrogen and water vapor. The study benefits from state-of-art surface science experimental tools, such as scanning tunneling and atomic force microscopies (STM/AFM), photoelectron emission microscopy (PEEM), temperature programmed desorption (TPD) and modulated molecular beam mass spectrometry (MMBMS), to provide detailed knowledge of how, why and where a chemical reaction initiates and subsequently progresses with time, and theoretical/computational methods at the atomistic scale. The theoretical/computational component reported here consists of the first-principles calculation of the electronic structure of U surfaces exposed to H attack The calculations were designed to shed light on the energetic of various configurations of H interstitial impurities on the surface or in the substrate of U bcc metal. Predictions as to the preference of H to occupy surface or substrate interstitial positions can be made on the basis of the configuration with the lowest ground-state total energy.

The purpose of the Single Heater Test (SHT), the design of the test, and the borehole layout were reported by OCRWM M&O (1996a). Briefly, the main purpose of the SHT is to study the thermal- mechanical behavior of the densely welded non-lithophysal Topopah Spring tuff at the Exploratory Studies Facility (ESF). The SHT is also used as a shake-down for the test of the coupled thermal- mechanical- hydrological-chemical (TMHC) processes.

RADIANT{trademark} is manufactured by United States Surgical Corporation, Vascular Therapies Division, (formerly Progressive Angioplasty Systems). The system comprises a liquid {beta}-radiation source, a shielded isolation/transfer device (ISAT), modified over-the-wire or rapid exchange delivery balloons, and accessory kits. The liquid {beta}-source is Rhenium-188 in the form of sodium perrhenate (NaReO{sub 4}), Rhenium-188 is primarily a {beta}-emitter with a physical half-life of 17.0 hours. The maximum energy of the {beta}-particles is 2.1 MeV. The source is produced daily in the nuclear pharmacy hot lab by eluting a Tungsten-188/Rhenium-188 generator manufactured by Oak Ridge National Laboratory (ORNL). Using anion exchange columns and Millipore filters the effluent is concentrated to approximately 100 mCi/ml, calibrated, and loaded into the (ISAT) which is subsequently transported to the cardiac catheterization laboratory. The delivery catheters are modified Champion{trademark} over-the-wire, and TNT{trademark} rapid exchange stent delivery balloons. These balloons have thickened polyethylene walls to augment puncture resistance; dual radio-opaque markers and specially configured connectors.