The authors present the results from an analysis of Hubble Space Telescope High Resolution Camera data for the Large Magellanic Cloud microlensing event MACHO-LMC-5. By determining the parallax and proper motion of this object they find that the lens is an M dwarf star at a distance of 578{sub -53}{sup +65}pc with a proper motion of 21.39 {+-} 0.04 mas/yr. Based on the kinematics and location of this star is it more likely to be part of the Galactic thick disk than thin disk population. They confirm that the microlensing event LMC-5 is a jerk-parallax microlensing event.

The technique of accelerator mass spectrometry (AMS) was validated successfully and utilized to study the pharmacokinetics and disposition in dogs of a preclinical drug candidate (Compound A), after oral and intravenous administration. The primary objective of this study was to examine whether Compound A displayed linear kinetics across sub-pharmacological (microdose) and pharmacological dose ranges in an animal model, prior to initiation of a human microdose study. The AMS-derived disposition properties of Compound A were comparable to data obtained via conventional techniques such as LC-MS/MS and liquid scintillation counting analyses. Thus, Compound A displayed multiphasic kinetics and possessed low plasma clearance (4.4 mL/min/kg), a long terminal elimination half-life (19.4 hr) and high oral bioavailability (82%). Currently there are no published comparisons of the kinetics of a pharmaceutical compound at pharmacological versus sub-pharmacological doses employing microdosing strategies. The present study thus provides the first description of the pharmacokinetics of a drug candidate assessed under these two dosing regimens. The data demonstrated that the pharmacokinetic properties of Compound A were similar following dosing at 0.02 mg/kg as at 1 mg/kg, indicating that in the case of Compound A, the kinetics of absorption, distribution and elimination in the dog appear to be linear across …

The current experimental lower bound on the Higgs mass significantly restricts the allowed parameter space in most realistic supersymmetric models, with the consequence that these models exhibit significant fine-tuning. We propose a solution to this `supersymmetric little hierarchy problem'. We consider scenarios where the stop masses are relatively heavy - in the 500 GeV to a TeV range. Radiative stability of the Higgs soft mass against quantum corrections from the top quark Yukawa coupling is achieved by imposing a global SU(3) symmetry on this interaction. This global symmetry is only approximate - it is not respected by the gauge interactions. A subgroup of the global symmetry is gauged by the familiar SU(2) of the Standard Model. The physical Higgs is significantly lighter than the other scalars because it is the pseudo-Goldstone boson associated with the breaking of this symmetry. Radiative corrections to the Higgs potential naturally lead to the right pattern of gauge and global symmetry breaking. We show that both the gauge and global symmetries can be embedded into a single SU(6) grand unifying group, thereby maintaining the prediction of gauge coupling unification. Among the firm predictions of this class of models are new states with the quantum numbers …

Research has shown that Active Pixel CMOS sensors can detect charged particles. We have been studying whether this process can be used in a collider environment. In particular, we studied the effect of radiation with 55 MeV protons. These results show that a fluence of about 2 x 10{sup 12} protons/cm{sup 2} reduces the signal by a factor of two while the noise increases by 25%. A measurement 6 months after exposure shows that the silicon lattice naturally repairs itself. Heating the silicon to 100 C reduced the shot noise and increased the collected charge. CMOS sensors have a reduced signal to noise ratio per pixel because charge diffuses to neighboring pixels. We have constructed a photogate to see if this structure can collect more charge per pixel. Results show that a photogate does collect charge in fewer pixels, but it takes about 15 ms to collect all of the electrons produced by a pulse of light.

The growth of nanocrystalline MoO{sub 3} islands on Au(111) using physical vapor deposition of Mo has been studied by scanning tunneling microscopy (STM) and low energy electron diffraction (LEED). The growth conditions affect the shape and distribution of the MoO{sub 3} nanostructures, providing a means of preparing materials with different percentages of edge sites that may have different chemical and physical properties than atoms in the interior of the nanostructures. MoO{sub 3} islands were prepared by physical vapor deposition of Mo and subsequent oxidation by NO{sub 2}exposure at temperatures between 450 K and 600 K. They exhibit a crystalline structure with a c(4x2) periodicity relative to unreconstructed Au(111). While the atomic-scale structure is identical to that of MoO{sub 3} islands prepared by chemical vapor deposition, we demonstrate that the distribution of MoO{sub 3} islands on the Au(111) surface reflects the distribution of Mo clusters prior to oxidation although the growth of MoO{sub 3} involves long-range mass transport via volatile MoO{sub 3} precursor species. The island morphology is kinetically controlled at 450 K, whereas an equilibrium shape is approached at higher preparation temperatures or after prolonged annealing at the elevated temperature. Mo deposition at or above 525 K leads to the …

A stress corrosion cracking (SCC) model has been adapted for performance prediction of high level radioactive-waste packages to be emplaced in the proposed Yucca Mountain radioactive-waste repository. SCC is one form of environmentally assisted cracking resulting from the presence of three factors: metallurgical susceptibility, critical environment, and tensile stresses. For waste packages of the proposed Yucca Mountain repository, the outer barrier material is the highly corrosion-resistant Alloy UNS-N06022, the environment is represented by the water film present on the surface of the waste package from dripping or deliquescence of soluble salts present in any surface deposits, and the stress is principally the weld induced residual stress. SCC has historically been separated into 'initiation' and 'propagation' phases. Initiation of SCC will not occur on a smooth surface if the surface stress is below a threshold value defined as the threshold stress. Cracks can also initiate at and propagate from flaws (or defects) resulting from manufacturing processes (such as welding). To account for crack propagation, the slip dissolution/film rupture (SDFR) model is adopted to provide mathematical formulae for prediction of the crack growth rate. Once the crack growth rate at an initiated SCC is determined, it can be used by the performance …

Optimized trajectories to a 500 km circular orbit are calculated for vehicles having a 100 kg Mars launch mass. Staging trades, thrust optimization, and the importance of vehicle shape for drag are all taken into consideration. The high acceleration of solid rockets requires a steep trajectory for drag avoidance, followed by a relatively large circularization burn, appropriate for a second stage. Liquid thrust reduces drag, resulting in less steep trajectories which have small circularization burns. Liquid propulsion requires less total {Delta}v, and offers options for multiple stages or just one. Graphs of payload mass versus stage propellant fractions are compared for liquid and solid propulsion.

We use data from a unique 40-year record of 150 urban and rural stations in the ''Black Smoke and SO2 Network'' in Great Britain to infer information about sources of atmospheric black carbon (BC). The data show a rapid decline of ambient atmospheric BC between 1962 and the early 1990s that exceeds the decline in official estimates of BC emissions based only on amount of fuel use and mostly fixed emission factors. This provides empirical confirmation of the existence and large impact of a time-dependent ''technology factor'' that must multiply the rate of fossil fuel use. Current ambient BC amounts in Great Britain comparable to those in western and central Europe, with diesel engines being the principal present source. From comparison of BC and SO2 data we infer that current BC emission inventories understate true emissions in the U.K. by about a factor of two. The results imply that there is the potential for improved technology to achieve large reduction of global ambient BC. There is a need for comparable monitoring of BC in other countries.