Description of a computer program for searching chemical information on magnetic tape.

Description of 15 specific systems employing search-type selection principles.

Abstract: The preliminary design and testing of a planar circuit six-port with diode detectors is described. The planar circuit medium was chosen to be finline, and all preliminary work was done in WR-42 waveguide (18-26.5 GHz). The finline substrate was alumina, and initially commercial beam-lead diodes were bonded to the finline metalization. The goal is to design an integrated circuit which could be fabricated on one chip (with diode detectors) and used as part of a six port network analyzer in the waveguide bands above 18 GHz. Initial designs proved to b unsatisfactory because of high losses and reflections. Most of the problems have b en solved, and a usable integrated finline circuit is a good possibility for a millimeter wave six-port.

From preface: STARPAC documentation is being published as a series of Technical Notes. This Note is the first in the series. It gives an overview of the STARPAC library, defines conventions used in the documentation, provides an example using STARPAC subroutines, and presents general background material. This Note includes information which is essential for using the STARPAC library, and users should be familiar with its contents before attempting to use any STARPAC subroutine.

Forward: The purpose of this report is to summarize the results obtained from a brief investigation of supercritical fluid extraction principles and applications. This study was one portion of a project funded by the U.S. Department of Energy, Office of Fossil Energy, contract nuriber DE-AI01076PR06010, in response to a preliminary proposal submitted by the authors. This report sometimes uses company trade naries to identify processes and patent holders. This usage implies no endorsement by HBS. Note also that some figures reproduced from other sources do not conform with NBS policy concerning SI units.

Report issued by the U.S. National Bureau of Standards discussing an analysis of seismic design provisions for buildings with three main objectives. As stated in the introduction, "The first objective was to assist the ATC in the preparation of its report. The second objective of the study was to augment the text of the published Provisions by providing a formal, consistent documentation of the text. The third objective was to provide alternate arrangements of the Provisions that would make them more readily usable by several categories of users" (p. 1). This report includes illustrations.

Abstract: Tables of important data for use in the analytical chemistry laboratory are provided. These tables contain information for use in gas chromatography, liquid chromatography, infrared and ultraviolet spectrophotometry, mass spectrometry, and wet chemical techniques. Tables relating to safe practice in the analytical laboratory are also included.

Abstract: The design, evaluation, and performance of a system for determining the magnitude of the transfer function (hence, the bandwidth) of a multimode optical fiber are presented. The system operates to about 1450 MHz using a tracking generator/spectrum analyzer combination for narrowband detection. It is constructed, almost entirely, from commercially available components. The system is less complex and easier to use than an equivalent time domain system and the measurement precision is comparable. Background information on time and frequency domain specifications, fiber bandwidth limitations, and alternate frequency domain techniques is also presented.

Report issued by the U.S. National Bureau of Standards discussing the construction of large electromagnetic cells. As stated in the introduction, "this instruction provides information and procedures necessary to fabricate a large transverse electromagnetic (TEM) cell to be used for experimental "electromagnetic interference" (EMI) evaluation studies" (p. 1). This report includes illustrations, and photographs.

Abstract: Electroexplosive devices (EEDs) are electrically fired explosive initiators used in a wide variety of applications. The nature of most of these applications requires that the devices function with near certainty when required and remain inactive otherwise. Recent concern with pulsed electromagnetic interference (EMI) and nuclear electromagnetic pulse (EMP) made apparent the lack of methodology for assessing EED vulnerability. A new and rigorous approach for characterizing EED firing levels is developed in the context of statistical linear models and is demonstrated in this paper. We combine statistical theory and methodology with thermodynamic modeling to determine the probability that an EED, of a particular type, fires when excited by a pulse of a given width and amplitude. The results can be applied to any type of EED for which the hot-wire explosive binder does not melt below the firing temperature. Included are methods.for assessing model validity and for obtaining probability plots, called "Firing Likelihood Plots". A method of measuring the thermal time constant of an EED is given. This parameter is necessary to evaluate the effect of a train of pulses. These statistical methods are both more general and more efficient than previous methods for EED assessment. The results provide information …

Design of a flashlamp-pumped dye laser capable of emitting light pulses 500 ns wide with a risetime of 300 ns.

Descriptions of the principal changes in the calorimeter and bolometer unit from the WR28 models of a microwave serving as National Bureau of Standards standard for power measurements in the frequency range 50 to 75 GHz.

From introduction: This note describes the design and error analysis of a WR10 thermal noise power standard. The standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature accurate to plus or minus 1 K.

Review of the progress in research, instrumentation, and service activities of the Spectrochemical Analysis Section from July 1970 to June 1971.

Technique for varying the coupling of power from far-infrared gas lasers and the design and construction of these lasers.

The following report describes scratch standards--a cosmetic standard--and studies on etched gratings that were made to replace submasters and redefine scratch standards.

The survey covers PVT, thermodynamic, thermal, transport, electrical radiative and mechanical properties.

Abstract: A review is given of the electrical resistance of materials at cryogenic temperatures. Measurement techniques, the data base, and uses of the data are presented. The emphasis is on metals and alloys of technological importance; a toxic which covers a large range of materials. Similarly, the treatment of theory and of measurement techniques is primarily for the user interested in the more practical aspects of the subject. In every instance, however, references are given which allow the reader to pursue the subject at any level.

From abstract: This paper presents the conflicts in the design and gives a solution. The complete evaluation requires assembly of the proposed apparatus to assess final accuracy.

From introduction: Simple, precise expressions for lunar diameter, average brightness temperature, flux density, and shape factor are presented. An analysis of the relationship between these parameters and corresponding errors are included. For broadbeam (HPBW>d) antennas, results show that flux density and shape factor can be determined with errors less than 13 percent and 0.4 percent respectively at frequencies below 10 GHz. Extension of the analysis to higher frequencies is indicated.

Abstract: A microcalorimeter has been built in WR 10 waveguide, 75-110 GHz, to serve as a power standard at the National Bureau of Standards (NBS). Included here is an evaluation of the errors in using the microcalorimeter for the measurement of effective efficiency of bolometer mounts. The error analysis shows a systematic uncertainty of +/- .83 percent and a random uncertainty of .37 percent.

This paper presents the details to implement a WR15 attentuation and reflection coefficient magnitude measurement system.

From introduction: This note describes the design and construction of a coaxial thermal noise standard. The standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature accurate to t 1 K in the frequency range from 1 GHz to 12.4 GHz.

From introduction: The purpose of this Technical Note is to describe refracted-ray scanning in detail, to analyze it as a measurement system, to document a particular system for implementing it, and to show some exemplary results.