Resource Type
Collection
Serial/Series Title
Atomic Energy Commission Reports
201
Hanford Works Reports
78
HW (Series)
54
Oak Ridge National Laboratory Reports
51
GEAP (Series)
43
General Electric Company Atomic Power Reports
43
APAE (Series)
38
University of California Radiation Laboratory Reports
37
ORNL (Series)
32
Report (U.S. Atomic Energy Commission)
27
57 More
Country
Month
438 Matching Results
Results open in a new window/tab. Unexpected Results? Search the Catalog Instead.
Results:
1 - 24 of
438
next
Instruction Manual, Mercury Relay Pulse Generator Model 1-1212C
The Model Q-1212C Pulser is a single frequency (60 pps) generator whose output waveform is characterized by a rise-time of less than 4 mµsec and, depending upon the method of termination, an exponential decay having a time constant of 300 or 600µsec. The waveform approximates that produced by a radiation detector. The waveform approximates that produced by a radiation detector. The maximum available output from the instrument is 10 volts, positive or negative polarity, and is continuously adjustable by means of step switches and a 10-turn potentiometer. The potentiometer has a linearity of 0.1%.
Date:
September 20, 1960
Creator:
Fairstein, E.
Object Type:
Report
System:
The UNT Digital Library
Fillerweld Operation and Maintenance Manual for Aluminum Welding
Fillerwelding is a fusion welding process that provides for the automatic addition of controlled amounts of fillerwire during inert-gas-shielded tungsten-arc welding. Fillerwelding aluminum jacketed fuel elements has been successfully demonstrated and is being used on a routine basis. This manual was written to provide the necessary information to operate and maintain the fillerweld equipment.
Date:
July 1, 1955
Creator:
unknown
Object Type:
Report
System:
The UNT Digital Library
A Simultaneous Scaler Control System
The primary purpose of this writeup is to present a description of the electrical and mechanical features of the developed system for use in maintenance and operation of a simultaneous scaler control unit.
Date:
August 15, 1955
Creator:
Tomlinson, R. L.
Object Type:
Report
System:
The UNT Digital Library
Multi-Purpose Dissolver Information Manual
The multi-purpose dissolver was designed to provide: 1. A critically safe vessel for dissolving uranium metal of enrichments up to one percent U-235. 2. A vessel which can be charged with fuel elements up to 10 feet long. 3. An off-gas arrangement which will eliminate return of ammonia to the dissolver during the Zirflex decladding process. 4. A vessel in which small charges can be dissolved without using extra chemicals. 5. A by-pass routing around the silver reactor during cladding removal.
Date:
March 4, 1960
Creator:
Simonds, H. P.
Object Type:
Report
System:
The UNT Digital Library
Fuels Preparation Department Analytical Laboratory Manual
The purpose of the Analytical Laboratory Manual is to assemble the basic procedures to be used for the analyses of materials employed within the Fuels Preparation Department. The methods appear in detailed steps suitable for laboratory use. This document replaces the "Essential Material Analytical Manual, " HW-25375 and "Metal Preparation Analytical Manual," HW-30862.
Date:
June 1959
Creator:
Analytical Laboratory Manufacturing Operation
Object Type:
Report
System:
The UNT Digital Library
Operating Manual for the Argonaut Reactor
The design of the Argonaut (Argonne Nuclear Assembly for University Training) was initiated by the Reactor Engineering Division of Argonne National Laboratory to satisfy needs for a low-power reactor facility within the Laboratory, and for training uses within the international School of Nuclear Science and Engineering (ISNSE). It was intended primarily for instruction and research in reactor physics. It was also considered as a possibility that it would fulfill the requirements of universities engaged in a program of nuclear science. The cost of the facility was to be kept to a minimum consistent with the high degree of inherent safety and a great amount of flexibility in the system. The basic design stemmed from the Knolls Atomic Power Laboratory Thermal Test Reactor* (TTR), now called Nuclear Test Reactor (NTR). Modification during the course of the work justified the new name "Argonaut".
Date:
August 1959
Creator:
Argonne National Laboratory
Object Type:
Report
System:
The UNT Digital Library
Standard Practices Counting Manual
The purpose of this manual is to present available data which can be used to determine disintegration rates of radioactive samples from counting rates measured under given circumstances with routinely used laboratory instruments. There is also brief discussion on the methods by which the various factors have been determined with reference to the accuracy with which they are known and to what extent the finally quoted disintegration rate is affected by these errors. Emphasis has been placed on those isotopes of particular interest to Radiological Sciences programs and the manual is intended as a standard through the use of which comparable values can be reported from all units in the Department.
Date:
January 4, 1954
Creator:
Schwendiman, L. C.
Object Type:
Report
System:
The UNT Digital Library
1706-KER Coolant Test Facility Operations Manual
This procedure is intended to be used as: 1. An instruction and guide for operation of the KER loops. 2. To aid in familiarization and understanding of the general operation of the loops. 3. To prevent lost time due to errors in loop operation. The procedure is not meant to be completely comprehensive in all details of loop operation.
Date:
January 23, 1958
Creator:
Dulin, R. V.
Object Type:
Report
System:
The UNT Digital Library
A Manual of Experiments in Reactor Physics
Nuclear processes are random in character, and, accordingly, are amenable to statistical treatment. In 1905, shortly after the discover of natural radioactivity, E. Von Schweldler showed that the analytical description of the decay distribution of radioactive substances followed from probability considerations regardless of the mechanism involved in the process of atomic disintegration.
Date:
August 1961
Creator:
Valente, Frank Anthony; Davidson, J. P. (John Pirnie), 1924-; Gisser, David G.; de Moraes, Octavio L.; Bryce, Donald H. & LoGuidice, Joseph M.
Object Type:
Report
System:
The UNT Digital Library
Reference Manual For KICK IBM Program
This reference manual describes the IBM 704 program called Kick, by which complete bubble chamber events are kinematically analyzed. Kick's input data is the output from the Pang program, which uses raw track measurements to spatially reconstruct the tracks, and fits appropriate curves to them.
Date:
May 1961
Creator:
Rosenfeld, Arthur H., 1926-2017
Object Type:
Report
System:
The UNT Digital Library
Operating Manual for the MTR, Section Two -- Exclusion Area, Materials Testing Reactor
From summary: "This manual is designed for the purpose of clarifying operating procedures of the Materials Testing Reactor and its associated equipment. In assembling this manual a description of each item of equipment and its function is presented. In addition, the generally accepted method of operating the equipment and the best corrective measures concerning all emergencies that might be encountered are set forth herein. Descriptive drawings and written instructions pertaining to the equipment have been included to further clarify the manual."
Date:
1955
Creator:
Phillips Petroleum Company. Atomic Energy Division.
Object Type:
Report
System:
The UNT Digital Library
Critical Incident Alarm - Model I Instruction and Maintenance Manual
The HAPO Critical Incident Alarm, Model I, is an instrument designed to give an audible and visual alarm signal in the event of a critical incident to which it is exposed. There will be thirty-one (31) of these instruments installed and several spares located in the various manufacturing buildings in the Chemical Processing Department where there exists any possibility of a critical incident occurring. The instrument is intended as a post or after-the-fact warning device. It will offer no protection prior or leading up to, nor prevent, a critical incident. They are intended to be operated from the 115 V. A.C., 60 C.P.S. emergency line power. The instrument is self-contained, including the radiation detector, and will be calibrated to alarm at 500 mr/hour in a gamma field.
Date:
May 8, 1959
Creator:
Kelly, P. R.
Object Type:
Report
System:
The UNT Digital Library
Electrical Design Standards and Graphical Symbols
This manual represents the recommendations of the Instrumentation and Controls Division committee on Electrical and Electronic Symbols and Drawing that have been issued to date, and supersedes the previously issued ORNL Electrical Symbols List and CF-58-12-141, Electrical and Electronic Drawing Standards for Wiring and Device Coding and Applications.
Date:
October 1960
Creator:
Bates, A.E.G; Bowelle, M.M.; Horton, J. L.; Moore, R. L.; Hyland, R. F. & Brashear, C.
Object Type:
Report
System:
The UNT Digital Library
A Manual of HRE Control and Instrumentation
Technical reports outlining the controls for the Homogeneous Reactor Experiment (HRE); controls are divided into three principal groups. 1. Reactor. 2. Process or auxiliary. 3. Power generation. These are the classifications designating the primary functions of the controls. [From Introduction]
Date:
January 23, 1952
Creator:
Quarles, L. R. & Walker, W. P.
Object Type:
Report
System:
The UNT Digital Library
Electrical and Electronic Symbols & Drawing Committee
This manual represents the recommendations of the Instrumentation and Controls Division committee on Electrical and Electronic Symbols and Drawing that have been issued to date. Section I consists of copies of the American Standards Association Graphical Symbols for Electrical Diagrams, with certain variations or additions that have been recommended by the Committee to clarify or more positively identify the device or element symbolized. Since publication of the present ASA standards, certain elements, such as the transistor, have come into common use. Committee and represent the symbols have been selected after considerable study by the Committee and represent the symbols that seem to be standard Reference Information series, Interim E--1.
Date:
November 1961
Creator:
Bates, A.E.G
Object Type:
Report
System:
The UNT Digital Library
Hanford Works Analytical Manual for Reactor Process Water
Purpose: "The Hanford Works Analytical Manual for Process Water is designed to specify the analytical methods to be applied for control purposes in the Reactor Section, Process Sub-Section laboratories. The procedures are in general form and serve as references rather than outlined laboratory instructions. The manual us designed to replace the "Hanford Works Manual," HW-12862."
Date:
February 13, 1953
Creator:
Hanford Works
Object Type:
Report
System:
The UNT Digital Library
Functional Testing and Operating Manual for Consolidated Helium Leak Detector, Model 24-101A
A pile gas leak detection system consisting of a purchased mass spectrographic type of helium detector, a long sampling line for use in remote or relatively inaccessable locations, a pump to pull a continuous sample of gas from the tip of the probe to the detector, and a rotameter to measure the gas flow rate in the sampling line has been developed, calibrated, operationally tested. The system is practical for use in locating all pile gas leaks larger than about 0.1 cubic foot per hour.
Date:
September 11, 1953
Creator:
Spencer, H. G.
Object Type:
Report
System:
The UNT Digital Library
Health Physics Manual for the Army Package Power Reactor
The primary purpose of this manual is to adopt a radiological safety program to provide all personnel with a safe place in which to work, visit or live.
Date:
January 18, 1957
Creator:
Ball, B. M.
Object Type:
Report
System:
The UNT Digital Library
Manual of Radiation Protection Standards
"The following is an alphabetical listing of terms and units in common usage at HAPO. Other terms and definitions may be added as the need becomes apparent or as revisions or additional terms are issued by the NCRP and ICRP."
Date:
July 1957
Creator:
General Electric Company
Object Type:
Report
System:
The UNT Digital Library
Manual of Radiation Protection Standards
"The following is an alphabetical listing of terms and units in common usage at Hanford Atomic Products Operation. Other terms and definitions may be added as the need becomes apparent or as revisions or additional terms are issued by the NCRP and ICRP."
Date:
March 1, 1960
Creator:
General Electric Company
Object Type:
Report
System:
The UNT Digital Library
Automatic Scaler A.A.E.C. Type 2A -- Service Manual
This manual is intended to give operating and maintenance information for the range of counting equipment in use by the A.A.E.C. at Lucas Heights, designation of Scaler Type 2A. This equipment has been designed in the General Physics Section of the A.A.E.C. General Nucleonics Division. The equipment was built by an Australian manufacturer (Siemens Nucleonics).
Date:
July 1963
Creator:
Fraser, H. J. & Waldron, C.
Object Type:
Report
System:
The UNT Digital Library
Process Engineering Report, Operating Manual for Supervisory Personnel, Raw Materials Feed Preparation Plant, Process and Operating Equipment. Part II
This technical report presents necessary information required to operate the raw materials feed preparation plant. The information herein is intended to serve as a guide to operating personnel and to provide general data concerning the process.
Date:
December 9, 1952
Creator:
Lukens, R. P.; Abrams, S. H.; Carr, H. R.; Lindsey, P. S.; Grimac, T. E.; Knoll, F. J. et al.
Object Type:
Report
System:
The UNT Digital Library
Analysis of Uranium Fuel-Element Wafers from Atomics International for Uranium, Plutonium and Samarium
Five irradiated and five unirradiated wafers were analyzed. Each wafer was analyzed for samarium by emission spectrography. The unirradiated wafers were analyzed for uranium by coulometric and potentiometric methods and for uranium isotopes by mass spectrometry. The irradiated wafers were analyzed for uranium and plutonium by coulometric methods, for plutonium isotopes by the 256-channel alpha pulse analyzer, and for the isotopes of uranium and of plutonium by mass spectrometry. The methods of preparing wafers for analysis are discussed; the data are tabulated.
Date:
December 27, 1960
Creator:
Gaitanis, M. J.
Object Type:
Report
System:
The UNT Digital Library
Generalized Heat Conduction Code for the IBM-7090 Computer
The IBM-70% code GHT has been programmed for the 7090computer, to be run under control of the IBM-7090 FORTAN Monitor System. By eliminating the use of tapes for intermediate number storage, it has been possible to reduce computing time by a factor of 26 over the 704. A minimum of three tapes are required; one for input, one for output, and the System tape. One scratch tape is required for transient problems, and one punch tape is required if the steady-state temperature distribution is to be punched on cards.
Date:
February 9, 1961
Creator:
Fowler, T. B.
Object Type:
Report
System:
The UNT Digital Library