Coupled modeling of subsurface multiphase fluid and heat flow, solute transport and chemical reactions can be used for the assessment of mineral alteration in hydrothermal systems, waste disposal sites, acid mine drainage remediation, contaminant transport, and groundwater quality. A comprehensive non-isothermal multi-component reactive fluid flow and geochemical transport simulator, TOUGHREACT, has been developed. A wide range of subsurface thermo-physical-chemical processes is considered under various thermohydrological and geochemical conditions of pressure, temperature, water saturation, and ionic strength. The program can be applied to one-, two- or three-dimensional porous and fractured media with physical and chemical heterogeneity. The model can accommodate any number of chemical species present in liquid, gas and solid phases. A variety of equilibrium chemical reactions are considered, such as aqueous complexation, gas dissolution/exsolution, and cation exchange. Mineral dissolution/precipitation can proceed either subject to local equilibrium or kinetic conditions. Changes in porosity and permeability due to mineral dissolution and precipitation can be considered. Linear adsorption and decay can be included. For the purpose of future extensions, surface complexation by double layer model is coded in the program. Xu and Pruess (1998) developed a first version of a non-isothermal reactive geochemical transport model, TOUGHREACT, by introducing reactive geochemistry into the …

Reports in the Argonne National Laboratory Nuclear Data and Measurement Series present results of studies in the field of microscopic nuclear data. The primary objective of the series is the dissemination of information in the comprehensive form required for nuclear technology applications. This Series is devoted to: (a) measured microscopic nuclear parameters, (b) experimental techniques and facilities employed in measurements, (c) the analysis, correlation and interpretation of nuclear data, and (d) the compilation and evaluation of nuclear data. Contributions to this Series are reviewed to assure technical competence and, unless otherwise stated, the contents can be formally referenced. This Series does not supplant formal journal publication, but it does provide the more extensive information required for technological applications (e.g., tabulated numerical data) in a timely manner.

None

The report covers the 2003-04 contract period, with a retrospective of the 11 years for the contract, from 1993 to 2004. This includes personnel, technical publications and reports, plus research laboratories employed. Specific information is given in eight research areas, reporting on all technology developed and/or deployed by the University of Florida.

None

The authors describe version 3.0 of the COPS set of nonlinearly constrained optimization problems. They have added new problems, as well as streamlined and improved most of the problems. They also provide a comparison of the FILTER, KNITRO, LOQO, MINOS, and SNOPT solvers on these problems.

Recently the collider physics community has seen significant advances in the formalisms and implementations of event generators. This review is a primer of the methods commonly used for the simulation of high energy physics events at particle colliders. We provide brief descriptions, references, and links to the specific computer codes which implement the methods. The aim is to provide an overview of the available tools, allowing the reader to ascertain which tool is best for a particular application, but also making clear the limitations of each tool.

This study is to show how a model was used to enable management to better estimate production capabilities to ensure contract milestones/commitments are met, to cope with fast changing project baselines and project missions, to ensure the project will meet the negotiated throughput, and to eliminate unnecessary but costly design changes.

The purpose of this project was twofold: first, provide an understanding of the technical foundation and planning required for deployment of Intelligent Transportation System (ITS)-based system architectures for the protection of New York City from a terrorist attack using a vehicle-deployed nuclear device; second, work with stakeholders to develop mutual understanding of the technologies and tactics required for threat detection/identification and establish guidelines for designing operational systems and procedures. During the course of this project we interviewed and coordinated analysis with people from the New Jersey State Attorney General's office, the New Jersey State Police, the Port Authority of New York/New Jersey, the Counterterrorism Division of the New York City Police Department, the New Jersey Transit Authority, the State of New Jersey Department of Transportation, TRANSCOM and a number of contractors involved with state and federal intelligent transportation development and implementation. The basic system architecture is shown in the figure below. In an actual system deployment, radiation sensors would be co-located with existing ITS elements and the data will be sent to the Traffic Operations Center. A key element of successful system operation is the integration of vehicle data, such as license plate, EZ pass ID, vehicle type/color and radiation …

Motivated by many design considerations, several conceptual designs for advanced reactors have proposed that the entire reactor building and a significant portion of the steam generator building will be either partially or completely embedded below grade. For the analysis of seismic events, the soil-structure interaction (SSI) effect and passive earth pressure for these types of deeply embedded structures will have a significant influence on the predicted seismic response. Sponsored by the US Nuclear Regulatory Commission (NRC), Brookhaven National Laboratory (BNL) is carrying out a research program to assess the significance of these proposed design features for advanced reactors, and to evaluate the existing analytical methods to determine their applicability and adequacy in capturing the seismic behavior of the proposed designs. This paper summarizes a literature review performed by BNL to determine the state of knowledge and practice for seismic analyses of deeply embedded and/or buried (DEB) nuclear containment type structures. Included in the paper is BNL's review of the open literature of existing standards, tests, and practices that have been used in the design and analysis of DEB structures. The paper also provides BNL's evaluation of available codes and guidelines with respect to seismic design practice of DEB structures. Based …

In this project we developed a method for using seismic S-wave data to map the patterns and densities of sub-surface fractures in the NW Geysers Geothermal Field/ (1) This project adds to both the general methods needed to characterize the geothermal production fractures that supply steam for power generation and to the specific knowledge of these in the Geysers area. (2)By locating zones of high fracture density it will be possible to reduce the cost of geothermal power development with the targeting of high production geothermal wells. (3) The results of the project having been transferred to both US based and international geothermal research and exploration agencies and concerns by several published papers and meeting presentations, and through the distribution of the data handling and other software codes we developed.

The Department of Energy selected CSSX as the preferred cesium removal technology for Savannah River Site waste. As a pretreatment step for the CSSX flowsheet, personnel contact the incoming salt solution that contains entrained sludge with MST to adsorb strontium and select actinides. They filter the resulting slurry to remove the sludge and MST. The filtrate receives further treatment to remove cesium in the solvent extraction system. The baseline filtration technology uses a Mott crossflow filter. We conducted pilot-scale crossflow filter testing with simulated SRS high level waste to evaluate the impact of operating parameters on the crossflow filtration process. The tests employed 0.5 micron and 0.1 micron filters. The feed slurries for these tests included simulated sludge plus MST, simulated sludge only, and simulated sludge plus manganese oxide solids. The supernate for these tests consisted of 5.6-6.4 M sodium, average salt solution. During the tests, we measured the axial pressure drop as a function of axial velocity, feed slurry, and insoluble solids concentration. This report documents the axial pressure drop data.

In 2002, the Program for Climate Model Diagnosis and Intercomparison (PCMDI) proposed the concept for a state-of-the-science appraisal of climate models to be performed approximately every two years. Motivation for this idea arose from the perceived needs of the international modeling groups and the broader climate research community to document progress more frequently than provided by the Intergovernmental Panel on Climate Change (IPCC) Assessment Reports. A committee of external reviewers, which included senior researchers from four leading international modeling centers, supported the concept by stating in its review: ''The panel enthusiastically endorses the suggestion that PCMDI develop an independent appraisal of coupled model performance every 2-3 years. This would provide a useful 'mid-course' evaluation of modeling progress in the context of larger IPCC and national assessment activities, and should include both coupled and single-component model evaluations.''

The Linac Coherent Light Source (LCLS) undulator line will consist of 33 undulator segments separated by breaks of two different lengths. The undulator segments are 3.4-m-long permanent-magnet planar hybrid devices with a period length of 30 mm and a magnetic gap of approximately 6 mm. Focusing quadrupoles, in a FODO lattice, and electron-beam diagnostics will be located in the breaks between undulator segments. Every third break will be longer in order to also accommodate x-ray diagnostics. Thus, taking the alternating focusing and defocusing quadrupoles into account, the ''super-period'' length before the undulator line repeats itself is six undulator segments. For additional details on the LCLS project and the undulator line, please refer to the conceptual design report (CDR). A full-length prototype undulator segment has been designed, manufactured and tested, and this document provides a comprehensive report of our experience with the prototype. It contains sections on the overall design philosophy and presents many important measurements including magnetic measurements of the magnet blocks, as well as of the assembled device, and mechanical and thermal measurements. It also contains a summary section (section 5) and one section that summarizes some remaining issues being investigated (section 6).

The purpose of this revision of the System Design Description (SDD) is to establish requirements that drive the design of the electrical support system and their bases to allow the design effort to proceed to License Application. This SDD is a living document that will be revised at strategic points as the design matures over time. This SDD identifies the requirements and describes the system design as they exist at this time, with emphasis on those attributes of the design provided to meet the requirements. This SDD has been developed to be an engineering tool for design control. Accordingly, the primary audience/users are design engineers. This type of SDD both ''leads'' and ''trails'' the design process. It leads the design process with regard to the flow down of upper tier requirements onto the system. Knowledge of these requirements is essential in performing the design process. The SDD trails the design with regard to the description of the system. The description provided in the SDD is a reflection of the results of the design process to date. Functional and operational requirements applicable to electrical support systems are obtained from the ''Project Functional and Operational Requirements'' (F&OR) (Siddoway 2003). Other requirements to …

Physical and chemical agents in the environment, those used in clinical applications, or encountered during recreational exposures to sunlight, induce damages in DNA. Understanding the biological impact of these agents requires quantitation of the levels of such damages in laboratory test systems as well as in field or clinical samples. Alkaline gel electrophoresis provides a sensitive (down to {approx} a few lesions/5Mb), rapid method of direct quantitation of a wide variety of DNA damages in nanogram quantities of non-radioactive DNAs from laboratory, field, or clinical specimens, including higher plants and animals. This method stems from velocity sedimentation studies of DNA populations, and from the simple methods of agarose gel electrophoresis. Our laboratories have developed quantitative agarose gel methods, analytical descriptions of DNA migration during electrophoresis on agarose gels (1-6), and electronic imaging for accurate determinations of DNA mass (7-9). Although all these components improve sensitivity and throughput of large numbers of samples (7,8,10), a simple version using only standard molecular biology equipment allows routine analysis of DNA damages at moderate frequencies. We present here a description of the methods, as well as a brief description of the underlying principles, required for a simplified approach to quantitation of DNA damages by …

In order to have a standard for furnaces that includes electricity consumption or for the efficiency of furnace blowers to be determined, it is necessary to determine the airflow of a furnace or furnace blower. This study focused on airflow testing, in order to determine if an existing test method for measuring blower airflow could be used to measure the airflow of a furnace, under conditions seen in actual installations and to collect data and insights into the operating characteristics of various types of furnace blowers, to use in the analysis of the electricity consumption of furnaces. Results of the measured airflow on furnaces with three types of blower and motor combinations are presented in the report. These included: (1) a forward-curved blower wheel with a typical permanent split capacitor (PSC) motor, (2) a forward-curved blower wheel with an electronically-commutated motor (ECM), and (3) a prototype blower, consisting of a backward-inclined blower wheel matched to an ECM motor prototype, which is being developed as an energy-saving alternative to conventional furnace blowers. The testing provided data on power consumption, static and total pressure, and blower speed.

A letter report issued by the General Accounting Office with an abstract that begins "The Weed and Seed program, within the Department of Justice's Office of Justice Programs (OJP), aims to prevent and reduce violent crime in targeted neighborhoods, but it cannot optimize its effectiveness without sound management practices. In 1999, GAO made four recommendations to the Executive Office for Weed and Seed (EOWS) to improve the program's management, including (1) developing adequate internal controls to fully document decisions, (2) improving program monitoring, (3) developing criteria for determining when sites have become self-sustaining and when to reduce or withdraw program funding, and (4) developing additional performance measures. GAO did this study to assess progress in implementing these recommendations."

Testimony issued by the General Accounting Office with an abstract that begins "One of the five priorities in the President's Management Agenda is the expansion of electronic (e-) government--the use of Internet applications to enhance access to and delivery of government information and services. To this end, the Office of Management and Budget (OMB) has sponsored 25 high-profile e-government initiatives. The initiatives were selected on the basis of value to citizens, potential improvement in agency efficiency, and the likelihood of being deployed within 18 to 24 months. In May 2002, a total of 91 objectives were set for these initiatives. At the request of Congress, GAO assessed the progress of the initiatives in addressing these 91 objectives as well as key challenges they have faced."

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

None

Weekly newspaper from Rio Grande City, Texas that includes local, state and national news along with extensive advertising.

This report provides an overview of Title IX in general and of the intercollegiate athletics regulations in particular. It includes a summary of the report issued by the Commission on Opportunity in Athletics and the Department of Education's (ED's) response with a discussion of recent legal challenges to the regulations and to the three-part test.