Report presenting an analysis of records of more than 134,000 flying hours, which have been received and evaluated in order to bring the V-G recorder data up to date. The analysis of the records is contained in the report. Results indicate that the maximum effective gust velocities for both the land transport airplanes and the flying boats have approached values of 40 feet per second.

Report discussing a study of automatic nonreturn air valves for use in an intermittent-jet engine. Four valve-spring materials, three valve-grill materials, and five types of valves were used. Valve A, which was made out of aluminum, was found to perform the best and last the longest.

Memorandum presenting the results of wind-tunnel oscillation tests to measure the rotary derivatives of a research airplane configuration at supersonic speeds. Measurements were made of the damping in yaw, pitch, and roll, the static longitudinal and directional stability derivatives, the effective-dihedral derivative, the rolling moment due to yawing, and the yawing moment due to rolling. The configuration was found to be statistically stable throughout the Mach number range, although its stability was becoming marginal at high angles of attack at Mach number 3.5.

Report presenting an investigation of several combustor configurations to determine if the length of the engine could be reduced. Testing indicated that when using a highly reactive fuel in the low subsonic region of the diffuser, part of the engine length can be eliminated.

Report presenting radiosonde measurements of upper-air temperatures taken over a 5-year period at nine stations in the northern hemisphere are summarized in order to provide information on the temperatures likely to be encountered during airplane and missile operations up to 100,000 feet.

Memorandum presenting an analysis of one-spool ducted-fan engines in order to determine the primarily limitations on ducted-fan-engine design and to compare this type with the turboprop and turbojet engines for the same application. Designs were studied at flight Mach numbers of 0 and 0.6 at sea level and Mach numbers of 0.6 and 0.8 at the tropopause. Results regarding the discussion of charts, effect of design parameters on turbine stress, effect of design parameters, effect of design parameters on thrust specific fuel consumption, and effect of design parameters on thrust per unit total weight flow are provided.

Report presenting an investigation in the supersonic blowdown tunnel to determine the effects of external store location on the lift, drag, and pitching-moment characteristics of a 60 degree delta wing at Mach numbers of 1.41, 1.62, and 1.96. Brief comparative tests were also made to determine the effect of changing the sweep of the strut attaching the store to the wing and of changing the chordwise location of the swept strut.

Investigations were made to develop a simplified method for designing exhaust-pipe shrouds to provide desired or maximum cooling of exhaust installations. Analysis of heat exchange and pressure drop of an adequate exhaust-pipe shroud system requires equations for predicting design temperatures and pressure drop on cooling air side of system. Present experiments derive such equations for usual straight annular exhaust-pipe shroud systems for both parallel flow and counter flow. Equations and methods presented are believed to be applicable under certain conditions to the design of shrouds for tail pipes of jet engines.

"An investigation has been made in the Langley 4- by 4-foot supersonic pressure tunnel at a Mach number of 1.41 to determine the aerodynamic characteristics of an 0.03-scale model of the Avro CF-105 airplane. The investigation included the determination of the static longitudinal and lateral stability, the control and the hinge-moment characteristics of the elevator, the aileron, and the rudder, as well as the vertical-tail-load characteristics. The results indicated a minimum drag coefficient of about 0.0270, and a maximum trimmed lift-drag ratio of about 4.25 which occurs at a lift coefficient of 0.16" (p. 1).