This dissertation presents measurements of the inclusive production cross sections for W and Z gauge bosons decaying through the electron channel with p{bar p} collisions at a center-of-mass energy of 1.96 TeV. The ratio of these cross sections is then used to extract the W total width. The Standard Model (SM) of electroweak and strong interactions is a collection of theories which together encompass what is currently known about the elementary particles that make up matter and the forces through which they interact. Experimentalists are constantly searching for violations of the Standard Model by making precision measurements of predicted interactions. The decay of the W boson is one such interaction. The rate of its decay is reflected in its width which is predicted to high precision using Standard Model-based calculations. Therefore, a high precision experimental width measurement would be very sensitive to any such violation. In principle the W and Z boson production cross sections could also be good Standard Model tests. However, a precise knowledge of integrated luminosity is required which is unfortunately difficult to obtain at the Tevatron. In fact, the W and Z cross section results can be used to obtain a more precise luminosity measurement. The …

N/A

N/A

Copper ions for the 2005 run [1] of the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) are accelerated in the Tandem, Booster and AGS prior to injection into RHIC. The setup and performance of these accelerators with copper are reviewed in this paper.

None

We summarize four of our group's high-risk/high-payoff research projects funded by the Intelligence Technology Innovation Center (ITIC) in conjunction with our DHS-funded pathogen informatics activities. These are (1) quantitative assessment of genomic sequencing needs to predict high quality DNA and protein signatures for detection, and comparison of draft versus finished sequences for diagnostic signature prediction; (2) development of forensic software to identify SNP and PCR-RFLP variations from a large number of viral pathogen sequences and optimization of the selection of markers for maximum discrimination of those sequences; (3) prediction of signatures for the detection of virulence, antibiotic resistance, and toxin genes and genetic engineering markers in bacteria; (4) bioinformatic characterization of virulence factors to rapidly screen genomic data for potential genes with similar functions and to elucidate potential health threats in novel organisms. The results of (1) are being used by policy makers to set national sequencing priorities. Analyses from (2) are being used in collaborations with the CDC to genotype and characterize many variola strains, and reports from these collaborations have been made to the President. We also determined SNPs for serotype and strain discrimination of 126 foot and mouth disease virus (FMDV) genomes. For (3), currently >1000 probes …

We read with interest the paper by Michiels et al on the prediction of cancer with microarrays and the commentary by Ioannidis listing the potential as well as the limitations of this approach (February 5, p 488 and 454). Cancer is a disease characterized by complex, heterogeneous mechanisms and studies to define factors that can direct new drug discovery and use should be encouraged. However, this is easier said than done. Casti teaches that a better understanding does not necessarily extrapolate to better prediction, and that useful prediction is possible without complete understanding (1). To attempt both, explanation and prediction, in a single nonmathematical construct, is a tall order (Figure 1).

The primary mode of production of W{sup +} bosons in a p{bar p} collider is u + {bar d} {yields} W{sup +}. The u quark generally carries more momentum than the {bar d} and the resultant W{sup +} tends to be boosted in the proton direction. Similarly, W bosons are boosted in the anti-proton direction. This is observed as an asymmetry in the rapidity distributions of positive and negative W bosons. Measurement of this asymmetry serves as a probe of the momentum distribution of partons within the proton. These distributions are required as input to the calculation of every p{bar p} production cross section. This thesis presents the first measurement at D0 of the charge asymmetry of the W boson production cross section as measured in W {yields} ev decays in 0.3 fb{sup -1} of p{bar p} collisions collected with the D0 Detector. Theoretical predictions made using the CTEQ6.1M and MRST(2004) parton distribution functions are compared with the measurement.

Annual financial report of the Guadalupe-Blanco River Authority of Texas documenting income, expenditures, and other relevant financial information for fiscal year ending August 31, 2004.

The WW{gamma} triple gauge boson coupling parameters are studied using p{bar p} {yields} {ell}{nu}{gamma} + X({ell} = e, {mu}) events at {radical}s = 1.96 TeV. The data were collected with the D0 detector from an integrated luminosity of 162 pb{sup -1} delivered by the Fermilab Tevatron Collider. The cross section times branching fraction for p{bar p} {yields} W({gamma}) + X {yields} {ell}{nu}{gamma} + X with E{sub T}{sup {gamma}} > 8 GeV and {Delta}R{sub {ell}{gamma}} > 0.7 is 14.8 {+-} 1.6(stat) {+-} 1.0(syst) {+-} 1.0(lum) pb. The one-dimensional 95% confidence level limits on anomalous couplings are -0.88 < {Delta}{kappa}{sub {gamma}} < 0.96 and -0.20 < {lambda}{sub {gamma}} < 0.20.

This report lists and provides statistics on President George W. Bush's nominations to U.S. district courts and courts of appeal (circuit courts) during the 107th and 108th Congresses and actions taken on the nominations by the Senate Judiciary Committee and the full Senate. This report focuses on judicial nominations made by the President and Senate actions taken on the nominations by the Senate Judiciary Committee and the Senate.

A methodology was developed for computing the probability that the sensor dart for the 'Near Real-Time Site Characterization for Assured HDBT Defeat' Grand-Challenge LDRD project will survive deployment over a forested region. The probability can be decomposed into three approximately independent probabilities that account for forest coverage, branch density and the physics of an impact between the dart and a tree branch. The probability that a dart survives an impact with a tree branch was determined from the deflection induced by the impact. If a dart that was deflected so that it impacted the ground at an angle of attack exceeding a user-specified, threshold value, the dart was assumed to not survive the impact with the branch; otherwise it was assumed to have survived. A computer code was developed for calculating dart angle of attack at impact with the ground and a Monte Carlo scheme was used to calculate the probability distribution of a sensor dart surviving an impact with a branch as a function of branch radius, length, and height from the ground. Both an early prototype design and the current dart design were used in these studies. As a general rule of thumb, it we observed that for …

The RHIC spin program requires 2 x 10{sup 11} proton/bunch with 70% polarization. As the injector to RHIC, AGS is the bottleneck for preserving polarization: there is no space for a full snake to overcome numerous depolarizing resonances. An ac dipole and a partial snake have been used to preserve beam polarization in the past few years. Two helical snakes have been built and installed in the AGS. With careful setup of optics at injection and along the ramp, this combination can eliminate all depolarizing resonances encountered during acceleration. This paper presents the setup and preliminary results.

Plants may produce compounds that directly or indirectly affect their biological environment. These compounds fall within a broad category of compounds called allelochemicals, and are exclusive of food that influences growth, health, or behavior of other organisms (Whittaker and Feeney 1971). One reason for interest in allelochemicals is their potential for use in alternative pest management systems. Using plant-produced allelochemicals in agricultural and horticultural practices could minimize synthetic pesticide use, reduce the associated potential for environmental contamination, and contribute to a more sustainable agricultural system.

High-energy ion colliders (hadron colliders operating with ions other than protons) are premier research tools for nuclear physics. The collision energy and high luminosity are important design and operations considerations. The experiments also expect flexibility with frequent changes in the collision energy, detector fields, and ion species, including asymmetric collisions. For the creation, acceleration, and storage of bright intense ion beams limits are set by space charge, charge exchange, and intrabeam scattering effects. The latter leads to luminosity lifetimes of only a few hours for intense heavy ions beams. Currently, the Relativistic Heavy Ion Collider (RHIC) at BNL is the only operating high-energy ion collider. Later this decade the Large Hadron Collider (LHC), under construction at CERN, will also run with heavy ions.

The thermodynamics and kinetics of the fcc (delta) to monoclinic (alpha-prime) phase transformation and its reversion in a plutonium-gallium alloy have been studied using differential scanning calorimetry, resistometry, and dilatometry. Under ambient conditions, the delta phase is metastable in a Pu-2.0 at% Ga alloy. Thermal cycling to below the ambient temperature results in a partial transformation to the alpha-prime phase; this transformation is composition-invariant and exhibits martensitic behavior. Because this transformation results in an unusually invariant large 25% volume contraction that cannot be fully accommodated by purely elastic adjustments, the transformation mode is expected to involve burst formation of individual alpha-prime particles. However, upon cooling, these individual bursts were not resolved by the above techniques, although signals corresponding to the overall accumulation of many alpha-prime particles were observed. On the other hand, upon heating, signals from differential scanning calorimetry, resistometry, and dilatometry showed a series of discrete changes occurring in periodic increments beginning at approximately 32 C. These features correspond to the cooperative reversion of many alpha-prime particles to the delta phase; they appear to be the result of an interplay between the autocatalytically driven reversion of a cascade of individual martensite units, and self-quenching caused by small changes of …

This report describes the advances that have been made over the past two years in testing and characterizing waste material in Hanford tanks.

A variety of H{sup -} ion sources are in use at accelerator laboratories around the world. A list of these ion sources includes surface plasma sources with magnetron, Penning and surface converter geometries as well as magnetic-multipole volume sources with and without cesium. Just as varied is the means of igniting and maintaining magnetically confined plasmas. Hot and cold cathodes, radio frequency, and microwave power are all in use, as well as electron tandem source ignition. The extraction systems of accelerator H{sup -} ion sources are highly specialized utilizing magnetic and electric fields in their low energy beam transport systems to produce direct current, as well as pulsed and/or chopped beams with a variety of time structures. Within this paper, specific ion sources utilized at accelerator laboratories shall be reviewed along with the physics of surface and volume H{sup -} production in regard to source emittance. Current research trends including aperture modeling, thermal modeling, surface conditioning, and laser diagnostics will also be discussed.

The purpose of this project was to conduct detailed surface mapping of one of the areas drilled by the Joint Industry Project with ChevronTexaco to understand gas hydrates in the Gulf of Mexico. The gently sloping, mostly flat floor of the Mississippi Canyon is interrupted by mounds and depressions that presumably reflect the complex geology and geohydrology related to turbidite deposition and pervasive salt tectonism. The seafloor mounds we mapped in this study occur in approximately 1300 water depth along the floor of the Mississippi Canyon in lease block areas Atwater Valley 13 and 14. High resolution sidescan sonar (100 kHz and 500 kHz) backscatter imagery, and chirp sub-bottom profiler data were collected using the DT1 deep-towed oceanographic mapping instrument, concentrating on the region directly adjacent to and surrounding two mounds identified as, mounds D and F, and in the region directly adjacent to and surrounding the mounds. The backscatter data have been mosaiced and normalized to provide information on the shape and extent of the mounds, the possible lateral extent of fauna, such as mussel and clam fields on the mounds, possible seep related flows and the occurrence of carbonate material. The extent of a mudflow can be mapped …

SNL-12 (permitted by the New Mexico State Engineer as C-2954) was drilled to provide geological data and hydrological testing of the Culebra Dolomite Member of the Permian Rustler Formation near the margin of dissolution of halite in the upper part of the Salado south of the Waste Isolation Pilot Plant (WIPP). SNL-12 is located in the southeast quarter of section 20, T23S, R31E, in eastern Eddy County, New Mexico. SNL-12 was drilled to a total depth of 905 ft below the ground level. Below surface dune sand and the Berino soil, SNL-12 encountered, in order, the Mescalero caliche, Gatu?a, Dewey Lake, Rustler, and uppermost Salado Formations. Two intervals were cored: (1) from the lower Forty-niner Member through the Magenta Dolomite and into the upper Tamarisk Member; and (2) from the lower Tamarisk Member through the Culebra Dolomite and Los Meda?os Members and into the uppermost Salado Formation. Geophysical logs were acquired from the open hole to total depth, and the drillhole was successfully completed with a screened interval open across the Culebra. At SNL-12, the uppermost Salado cores display displacive halite crystals in clastic-rich units below an amalgamated sulfate at the top of the formation. There is no indication of …

Initial- and final-state interactions from gluon exchange, normally neglected in the parton model, have a profound effect in QCD hard-scattering reactions, leading to leading-twist single-spin asymmetries, diffractive deep inelastic scattering, diffractive hard hadronic reactions, as well as nuclear shadowing and antishadowing-leading-twist physics not incorporated in the light-front wavefunctions of the target computed in isolation. The physics of such processes thus require the understanding of QCD at the amplitude level; in particular, the physics of spin requires an understanding of the phase structure of final-state and initial-state interactions, as well as the structure of the basic wavefunctions of hadrons themselves. I also discuss transversity in exclusive channels, including how one can use single-spin asymmetries to determine the relative phases of the timelike baryon form factors, as well as the anomalous physics of the normal-normal spin-spin correlation observed in large-angle proton-proton elastic scattering. As an illustration of the utility of light-front wavefunctions, the transversity distribution of a single electron is computed, as defined from its two-particle QED quantum fluctuations.

This report summarizes the results of environmental surveys conducted within the corridor of a temporary haul road (''Haul Road'') to be constructed from East Tennessee Technology Park (ETTP) to the Environmental Management Waste Management Facility (EMWMF) located just west of the Y-12 National Security Complex (Y-12). Environmental surveys were conducted by natural resource experts at Oak Ridge National Laboratory who routinely assess the significance of various project activities on the Oak Ridge Reservation (ORR). ORNL assistance to the Haul Road Project included environmental assessments necessary to determine the best route for minimizing impacts to sensitive resources such as wetlands or rare plants. Once the final route was chosen, environmental surveys were conducted within the corridor to evaluate the impacts to sensitive resources that could not be avoided. The final Haul Road route follows established roads and a power-line corridor to the extent possible (Fig. 1). Detailed explanation regarding the purpose of the Haul Road and the regulatory context associated with its construction is provided in at least two major documents and consequently is not presented here: (1) Explanation of Significant Differences for the Record of Decision for the Disposal of Oak Ridge Reservation Comprehensive Environmental Response, Compensation, and Liability Act …

Wheat straw (Triticum aestivum L.) is an abundant source of plant fiber. It is regenerated, in large quantities, every year. At present, this potentially valuable resource is greatly under-exploited. Most of the excess straw biomass (i.e., tonnage above that required for agronomic cropping system sustainability) is managed through expensive chopping/tillage operations and/or burnt in the field following harvest, resulting in air pollution and associated health problems. Potential applications for wheat straw investigated within this project include energy and composites manufacture. Other methods of straw utilization that will potentially benefit from the findings of this research project include housing and building, pulp and paper, thermal insulation, fuels, and chemicals. This project focused on components of the feedstock assembly system for supplying a higher value small grains straw residue for (1) gasification/combustion and (2) straw-thermoplastic composites. This project was an integrated effort to solve the technological, infrastructural, and economic challenges associated with using straw residue for these bioenergy and bioproducts applications. The objective of the research is to contribute to the development of a low-capital distributed harvesting and engineered storage system for upgrading wheat straw to more desirable feedstocks for combustion and for straw-plastic composites. We investigated two processes for upgrading wheat …

The exit from mitosis is the last critical decision a cell has to make during a division cycle. A complex regulatory system has evolved to evaluate the success of mitotic events and control this decision. Whereas outstanding genetic work in yeast has led to rapid discovery of a large number of interacting genes involved in the control of mitotic exit, it has also become increasingly difficult to comprehend the logic and mechanistic features embedded in the complex molecular network. Our view is that this difficulty stems in part from the attempt to explain mitotic exit control using concepts from traditional top-down engineering design, and that exciting new results from evolutionary engineering design applied to networks and electronic circuits may lend better insights. We focus on four particularly intriguing features of the mitotic exit control system: the two-stepped release of Cdc14; the self-activating nature of Tem1 GTPase; the spatial sensor associated with the spindle pole body; and the extensive redundancy in the mitotic exit network. We attempt to examine these design features from the perspective of evolutionary design and complex system engineering.