Atomic hydrogen is a very important constituent for processes ranging from cleaning oxide from GaAs and annealing amorphous silicon to the deposition of diamond. Because the usual techniques for measuring atomic fraction are either expensive and cumbersome to use, or unsuitable for application to highly dissociated hydrogen, a specially designed sensor was developed. Sensor design is based on a diffusion tube with noncatalytic walls, having one end open to the atom source and a catalytic closure at the other end. The sensor is simple and inexpensive to fabricate, and determining atom density is straightforward. Sensor design also inhibits thermal runaway, which occurs when atom density is high enough to impart enough recombination energy to the non-catalytic surface to substantially raise its temperature. While recombination coefficients for such surfaces are very low near room temperature, they increase nearly exponentially with temperature unless actively cooled. With the use of a straightforward calibration scheme to determine the variation in species fraction along the diffusion tube, the atomic fraction at the tube opening is determined. Design strategy, implementation considerations, and calibration method are presented. In addition, data obtained from an atomic hydrogen source are compared to relevant published data.

The method of cells has been extended to include damage or debonding between all adjacent subcells using a finite element formulation for the original cells assembly. Damage is implemented by placing a nonlinear three-dimensional spring between adjacent subcells. With this arrangement the damage is inherently anisotropic. The ``nonlinear substructure`` cells finite element model is incorporated as a user defined material routine in a general purpose finite element code. The primary motivation for casting the method of cells as a finite element assemblage is to provide a composite constitutive model that facilitates the incorporation of various constituent material models, as well as any level of detail desired in the microstructure geometry. At present, the constituent material models may be anisotropic elastic or isotropic viscoelastic-plastic, while damage evolution is based on the macroscopic strain. The capability of the model is demonstrated through analyses of some simple structures loaded to failure.

This report is a continuation of reports (Kasza et al., 1994) that document the configuration of the uppermost unconfined aquifer beneath the Hanford Site. This series presents the results of the semiannual water level measurement program and the water table maps generated from these measurements. The reports document the changes in the groundwater level at the Hanford Site during the transition from nuclear material production to environmental restoration and remediation. In addition, these reports provide water level data to support the various site characterization and ground water monitoring programs currently in progress on the Hanford Site. This report highlights the three major operations areas (the 100, 200, and 300/1100 Areas) where wastes were discharged to the soil. Each area includes a summary discussion of the data, a well index map, and a contoured map of the water table surface.

The radiological survey of the former radioactive waste treatment plant site (TA-45), Acid Canyon, Pueblo Canyon, and Los Alamos Canyon found residual contamination at the site itself and in the channel and banks of Acid, Pueblo, and lower Los Alamos Canyons all the way to the Rio Grande. The largest reservoir of residual radioactivity is in lower Pueblo Canyon, which is on DOE property. However, residual radioactivity does not exceed proposed cleanup criteria in either lower Pueblo or lower Los Alamos Canyons. The three alternatives proposed are (1) to take no action, (2) to construct a sediment trap in lower Pueblo Canyon to prevent further transport of residual radioactivity onto San Ildefonso Indian Pueblo land, and (3) to clean the residual radioactivity from the canyon system. Alternative 2, to cleanup the canyon system, is rejected as a viable alternative. Thousands of truckloads of sediment would have to be removed and disposed of, and this effort is unwarranted by the low levels of contamination present. Residual radioactivity levels, under either present conditions or projected future conditions, will not result in significant radiation doses to persons exposed. Modeling efforts show that future transport activity will not result in any residual radioactivity concentrations …

Weekly newspaper from Clifton, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Weekly newspaper from Clifton, Texas that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

A performance assessment of the operating Solid Waste Storage Area 6 (SWSA 6) facility for the disposal of low-level radioactive waste at the Oak Ridge National Laboratory has been prepared to provide the technical basis for demonstrating compliance with the performance objectives of DOE Order 5820.2A, Chapter 111.2 An analysis of the uncertainty incorporated into the assessment was performed which addressed the quantitative uncertainty in the data used by the models, the subjective uncertainty associated with the models used for assessing performance of the disposal facility and site, and the uncertainty in the models used for estimating dose and human exposure. The results of the uncertainty analysis were used to interpret results and to formulate conclusions about the performance assessment. This paper discusses the approach taken in analyzing the uncertainty in the performance assessment and the role of uncertainty in performance assessment.

Weekly newspaper from Clifton, Texas that includes local, state, and national news along with advertising.

Weekly newspaper from Clifton, Texas that includes local, state, and national news along with advertising.

Reservoirs in the Lansing-Kansas City limestone result from complex interactions among paleotopography (deposition, concurrent structural deformation), sea level, and diagenesis. Analysis of reservoirs and surface and near-surface analogs has led to developing a {open_quotes}strandline grainstone model{close_quotes} in which relative sea-level stabilized during regressions, resulting in accumulation of multiple grainstone buildups along depositional strike. Resulting stratigraphy in these carbonate units are generally predictable correlating to inferred topographic elevation along the shelf. This model is a valuable predictive tool for (1) locating favorable reservoirs for exploration, and (2) anticipating internal properties of the reservoir for field development. Reservoirs in the Lansing-Kansas City limestones are developed in both oolitic and bioclastic grainstones, however, re-analysis of oomoldic reservoirs provides the greatest opportunity for developing bypassed oil. A new technique, the {open_quotes}Super{close_quotes} Pickett crossplot (formation resistivity vs. porosity) and its use in an integrated petrophysical characterization, has been developed to evaluate extractable oil remaining in these reservoirs. The manual method in combination with 3-D visualization and modeling can help to target production limiting heterogeneities in these complex reservoirs and moreover compute critical parameters for the field such as bulk volume water. Application of this technique indicates that from 6-9 million barrels of Lansing-Kansas City oil …

A prototype Compton scatter camera for imaging gamma rays has been built and tested. This camera addresses unique aspects of gamma-ray imaging at nuclear industrial sites, including gamma-ray energies in the 0.5 to 3.0 MeV range and polychromatic fields. Analytic models of camera efficiency, resolution and contaminating events are developed. The response of the camera bears strong similarity to emission computed tomography devices used in nuclear medicine. A direct Fourier based algorithm is developed to reconstruct two-dimensional images of measured gamma-ray fields. Iterative ART and MLE algorithms are also investigated. The point response of the camera to gamma rays of energies from 0.5 to 2.8 MeV is measured and compared to the analytic models. The direct reconstruction algorithm is at least ten times more efficient than the iterative algorithms are also investigated. The point response of the camera to gamma rays energies from 0.5 to 2.8 MeV is measured and compared to the analytic models. The direct reconstruction algorithm is at least ten times more efficient than the iterative algorithms and produces images that are, in general, of the same quality. Measured images of several phantoms are shown. Important results include angular resolutions as low as 4.4{degrees}, reproduction of phantom …

This volume contains articles on efficient generation of second-harmonic radiation from short-pulse lasers; calculation of the stabilization cutoff wave numbers for the Rayleigh-Taylor instability; a high-frequency silicon optical modulator; the angular dependence of stimulated Brillouin scattering; and femtosecond dynamics of ladder polymers. Three of these articles--second-harmonic generation, Rayleigh-Taylor cutoff wave numbers, and angular dependence of Brillouin scattering--are directly related to the OMEGA Upgrade, currently under construction. A summary of the status of the OMEGA Upgrade laser facility and the NLUF News for FY94 are included in this volume.

Weekly Jewish newspaper from Fort Worth, Texas that includes local, state, and national news along with extensive advertising.

Monthly newspaper from Oklahoma City, Oklahoma that includes news and information about the Churches of Christ along with advertising.

Weekly Jewish newspaper from Fort Worth, Texas that includes local, state, and national news along with extensive advertising.

Weekly Jewish newspaper from Fort Worth, Texas that includes local, state, and national news along with extensive advertising.

The contact between an obsidian flow and a steep-walled tuff canyon was examined as an analogue for a highlevel waste repository. The analogue site is located in the Valles Caldera in New Mexico, where a massive obsidian flow filled a paleocanyon in the Battleship Rock tuff. The obsidian flow provided a heat source, analogous to waste panels or an igneous intrusion in a repository, and caused evaporation and migration of water. The tuff and obsidian samples were analyzed for major and trace elements and mineralogy by INAA, XRF, X-ray diffraction; and scanning electron microscopy and electron microprobe. Samples were also analyzed for D/H and {sup 39}Ar/{sup 4O} isotopic composition. Overall,the effects of the heating event seem to have been slight and limited to the tuff nearest the contact. There is some evidence of devitrification and migration of volatiles in the tuff within 10 meters of the contact, but variations in major and trace element chemistry are small and difficult to distinguish from the natural (pre-heating) variability of the rocks.

This report presents guidelines for evaluating uncertainty in mathematical equations and computer models applied to assess human health and environmental risk. Uncertainty analyses involve the propagation of uncertainty in model parameters and model structure to obtain confidence statements for the estimate of risk and identify the model components of dominant importance. Uncertainty analyses are required when there is no a priori knowledge about uncertainty in the risk estimate and when there is a chance that the failure to assess uncertainty may affect the selection of wrong options for risk reduction. Uncertainty analyses are effective when they are conducted in an iterative mode. When the uncertainty in the risk estimate is intolerable for decision-making, additional data are acquired for the dominant model components that contribute most to uncertainty. This process is repeated until the level of residual uncertainty can be tolerated. A analytical and numerical methods for error propagation are presented along with methods for identifying the most important contributors to uncertainty. Monte Carlo simulation with either Simple Random Sampling (SRS) or Latin Hypercube Sampling (LHS) is proposed as the most robust method for propagating uncertainty through either simple or complex models. A distinction is made between simulating a stochastically varying …

This qualitative study examined the characteristics of the mother-child relationship of adult survivors of childhood sexual abuse at the time of the abuse. The study consisted of data from the McMaster Family Assessment Device (FAD), the Family of Origin Scale (FOS), and a set of structured interview questions designed by the researcher. Autonomy/intimacy concepts from the FOS examined constructs of clarity of expression, responsibility, respect, openness, acceptance of loss and separation, expression of a wide range of feelings, conflict resolution, mood and tone, and empathy.