"An investigation has been made at high subsonic speeds of the aerodynamic characteristics in pitch and sideslip of a 1/l4-scale model of the Grumman XF10F airplane with a wing sweepback angle of 42.5. The longitudinal stability characteristics (with the horizontal tail fixed) indicate a pitch-up near the stall; however, this was somewhat alleviated by the addition of fins to the side of the fuselage below the horizontal tail. The original model configuration became directionally unstable for small sideslip angles at Mach numbers above 0.8; however, the instability was eliminated by several different modifications" (p. 1).

Report presenting the results of flight tests showing lateral oscillation in the Bell X-1 and calculations created to determine the effects of changes in several mass and aerodynamic parameters on the lateral oscillations. Calculations indicate that lateral stability should be improved by a more positive inclination of the principal axis of inertia or a reduction of the value of yawing moment of inertia.

"A two-dimensional wind-tunnel investigation of the flow and force characteristics of four NACA 6A-series airfoils with thickness ratios of 4, 6, and 9 percent has been conducted in the Langley airfoil test apparatus at at transonic Mach numbers between 0.8 and 1.25. The Reynolds number range for these tests varied from 2.6 x 10(6) to 2.8 x 10(6). As was expected, the airfoils exhibited a smooth transition in force coefficients from a Mach number of 1.0 to the values obtained at the higher speeds. Lift-curve slope and maximum lift-drag ratio correlated very well on a basis of the transonic similarity laws at Mach numbers above 1.0, but below that value the correlation was not good" (p. 1).

Report presenting flight tests over a range of Mach numbers to study the effects of a simulated afterburning turbojet engine on the gross longitudinal flight characteristics of two geometrically identical models of a swept-wing fighter-type configuration. Results regarding the trim characteristics, lift, pitching moment, dynamic stability, and drag are provided.