A list is presented of subject headings used by the U.S.A.E.C. Division of Technical Information for indexing literature in the field of nuclear science and technology. (C.H.)

During the past year notable progress was made in several laboratories on design for linear accelerators in the energy range up to and above 1 Bev. Interest in linacs for this energy centers on two possible applications: first, as injectors for 300 to 1000 Bev synchrotrons, and second, as sources of intense meson beams. To review this progress, a conference jointly sponsored by the Brookhaven National Laboratory and Yale University was held at Brookhaven during the week of August 20, 1962.

References applicable to the problems of transponting charged particles in the areas external to accelerators are presented. The 891 references cover the period 1949 to 1981, with a few references both prior and subsequent to this period included. Part I is concerned with the more general aspects of electron optics. Part II contains the references that deal more directly with applications to particle accelerators. Arrangement within each pant is by broad subject with cross references listed at the end of each section. An author index is included. (M.C.G.)

A transistorized instrument prototype was designed and constructed to replace a vacuum-tube instrument in an alpha gauge, which measures the thickness density of gases. The instrument amplifies, shapes, discriminates, and counts alpha pulses from a Au-Si surface-barrier detector exposed to an alpha source in a gas-filled chamber. The circuit consists of a charge-sensitive preamplifier, a main amplifier with pulse clipping, a Schmitt trigger, a diode pump, and a count rate meter. Preliminary tests gave results comparable to the vacuum-tube instrument. Accuracy of counting was within 10% for 0.5- to 10-Mev alpha particles emitted at a maximum rate of 10/sup 6 per sec. The instrument was stable at 25 to 55 deg C, is small and portable, and costs less than 0. An infinitely thick, alpha source that will give a high count rate is being constructed for final tests. (auth)

Annealing beta-heat-treated production-size dingoturanium core blanks in the high alpha range (1150 to 1200 deg F) produced a fine, equiaxed grain size by a recrystallization process. The extent of recrystallization is dependent upon the rate of cooling through the beta-to-alpha transformation, the time and temperature of annealing, and whether or not impurities that retard grain growth are present. The cooling rate through the beta-to-alpha transformation was varied by using a range of beta temperatures and air cooling times prior to quenching into water. Longer air cooling times are permissible at the higher beta temperatures; however, the greatest amount of induced lattice strain was obtained after an air delay of only 2 seconds before quenching. Decreasing the annealing temperature results in a corresponding increase in the annealing time required for an equivalent amount of recrystallization. A second phase, present in the alloyed dingot metal, inhibited recrystallization and grain growth. Alloyed metal recrystallized progressively from the outer periphery to the center of the core, whereas unalloyed metal subjected to identical annealing conditions exhibited recrystallized grains throughout the cross section. A reduction in grain size from 0.38 mm to 0.25 mm occurred in a beta-treated, unalloyed core after annealing at 1200 deg F …