The processing of materials using rf and/or microwave power is a broad area that has grown significantly in the past few years. The authors have applied rf and microwave technology in the areas of ceramic sintering, plasma processing, and waste processing. The sintering of ceramics in the frequency range of 50 MHz-28 GHz has lead to unique material characteristics compared to materials that have been sintered conventionally. It has been demonstrated that sintering can be achieved in a variety of materials, including alumina, zirconia, silicon carbide, and boron carbide. In the area of plasma processing, progress has been made in the development and understanding of high density plasma sources, including inductively coupled plasma (ICP) sources. The effects of processing conditions on the ion energy distribution at the substrate surface (a critical processing issue) have been determined for a variety of process gases. The relationship between modeling and experiment is being established. Microwave technology has also been applied to the treatment of radioactive and chemical waste. The application of microwaves to the removal of contaminated concrete has been demonstrated. Details of these programs and other potential application areas are discussed.

The Department of Energy, under a government-to-government program, hosted the first visit with the Russian Federation to exchange information and technologies for special nuclear material control, accounting, and physical protection at a plutonium storage facility. The Russian specialists toured a storage facility at the Hanford Site near Richland, Washington, and were shown the physical protection and materials control systems that DOE employs to protect excess nuclear materials. Technical discussions included topics associated with protective forces and their operation, perimeter and interior intrusion detection and assessment equipment/systems, vulnerability assessment demonstrations, and the vault monitoring and materials control systems. In October, the Russian Federation hosted a reciprocal visit to the Mayak Enterprise civil plutonium storage facility, previously known as Chelyabinsk-65. The US specialists participated in technical discussions on the protection and control of plutonium and supported an evaluation of safeguards and security at the Mayak storage facility.

Article discussing transition and gap models of forest dynamics.

Rapid deforestation often produces landscape-level changes in forest characteristics and structure, including area, distribution, and forest habitat types. Changes in landscape pattern through fragmentation or aggregation of natural habitats can alter patterns of abundance for single species and entire communities. Examples of single-species effects include increased predation along the forest edge, the decline in the number of species with poor dispersal mechanisms, and the spread of exotic species that have deleterious effects (e.g., gypsy moth). A decrease in the size and number of natural habitat patches increases the probability of local extirpation and loss of diversity of native species, whereas a decline in connectivity between habitat patches can negatively affect species persistence. Thus, there is empirical justification for managing entire landscapes, not just individual habitat types, in order to insure that native plant and animal diversity is maintained. A landscape is defined as an area composed of a mosaic of interacting ecosystems, or patches, with the heterogeneity among the patches significantly affecting biotic and abiotic processes in the landscape. Patches comprising a landscape are usually composed of discrete areas of relatively homogeneous environmental conditions and must be defined in terms of the organisms of interest. A large body of theoretical …

Seismic and gravity data, acquired by the SAGE program over the past twelve years, are used to define the geometry of the Espanola basin and the extent of pre-Tertiary sedimentary rocks. The Paleozoic and Mesozoic units have been thinned and removed during Laramide uplift in an area now obscured by the younger rift basin. The Espanola basin is generally a shallow, asymmetric transitional structure between deeper, better developed basins to the northeast and southwest. The gravity data indicate the presence of three narrow, but deep, structural lows arrayed along the Embudo/Pajarito fault system. These sub-basins seem to be younger than the faults on the basin margins. This apparent focussing of deformation in the later history of the basin may be a response to changes in regional stress or more local accommodation of the rift extension. Future work is planned to develop seismic data over one of these sub-basins, the Velarde graben, and to better define the gravity map in order to facilitate three-dimensional modeling.

Strong interest has arisen in accelerator-driven spallation-neutron sources that surpass existing facilities (such as ISIS at Rutherford or LANSCE at Los Alamos) by more than an order of magnitude in beam power delivered to the spallation target. The approach chosen by Los Alamos (as well as the European Spallation Source) provides the full beam energy by acceleration in a linac as opposed to primary acceleration in a synchrotron or other circular device. Two modes of neutron production are visualized for the source. A short-pulse mode produces 1 MW of beam power (at 60 pps) in pulses, of length less than 1 ms, by compression of the linac macropulse through multi-turn injection in an accumulator ring. A long-pulse mode produces a similar beam power with 1-ms-long pulses directly applied to a target. This latter mode rivals the performance of existing reactor facilities to very low neutron energies. Combination with the short-pulse mode addresses virtually all applications.

This document contains reports which were presented at a symposium for adaptive control systems. Topics were concerned with fuzzy logic, genetic algorithms, adaptive processes control, nonlinear component analysis, and processes control and efficiency applied to reducing nitrogen oxides emissions and to a column flotation unit. Individual reports (22 reports) are processed separately for the data bases.

Research on human impacts or natural processes that operate over broad geographic areas must explicitly address issues of scale and spatial heterogeneity. While the tropical forests of Southeast Asia and Mexico have been occupied and used to meet human needs for thousands of years, traditional forest management systems are currently being transformed by rapid and far-reaching demographic, political, economic, and environmental changes. The dynamics of population growth, migration into the remaining frontiers, and responses to national and international market forces result in a demand for land to produce food and fiber. These results illustrate some of the mechanisms that drive current land use changes, especially in the tropical forest frontiers. By linking the outcome of individual land use decisions and measures of landscape fragmentation and change, the aggregated results shows the hierarchy of temporal and spatial events that in summation result in global changes to the most complex and sensitive biome -- tropical forests. By quantifying the spatial and temporal patterns of tropical forest change, researchers can assist policy makers by showing how landscape systems in these tropical forests are controlled by physical, biological, social, and economic parameters.

Conditions which seed the self focussing of high-power broadband laser beams are determined by examining growth rates for plane-wave perturbations on a strong pump field as a function of frequency and angle. Measurements verifying predictions of growth based on the linearized stability analysis of Bespalov and Talanov extended to broadband fields are reported.

Analyses of Hot Gas Stream Cleanup (HGSC) ashes and descriptions of filter performance were made to address the problems with filter operation that are apparently linked to the collected ash. This task is designed to generate data base of the key properties of ashes collected from operating advanced particle filters and to relate these ash properties to the operation and performance of these filters. Activities including initial formatting of the data base and entry, modification of the permeability model, and initial design of a high-temperature test device for measuring uncompacted bulk porosity of ash aggregates (indicator of relative cohesivity of the ash, filter cake porosity/permeability). Chemical analyses of hopper and filter cake ashes from Tidd showed that the consolidation degree could not be accounted for by condensation/adsorption from the flue gas; the mechanism is likely physical rearrangement of the ash particles.

The {gamma}{sub t}-jump de-signed to reduce the bunch self-field mismatch and intensity loss during the AGS transition crossing can cause significant orbit and lattice distortions and dramatically enhance chromatic nonlinear effects. Employing a low-intensity, small emittance proton bunch crossing transition with the {gamma}{sub t}-jump quadrupoles excited, we found that the nonlinear momentum-compaction factor {alpha}{sub 1} increases from 2.2 to about 90 in the presence of the {gamma}{sub t}-jump. On the other hand, this enhancement can be effectively suppressed by properly exciting the chromaticity sextupoles, reducing {alpha}{sub 1} from 90 to 16. The experimental measurement agrees well with computer simulations using MAD and TIBETAN.

Recent geologic and geophysical investigations within the Albuquerque Basin have shed light on the potentially seismogenic sources that might affect Sandia National Laboratories, New Mexico (SNL/NM), a multi-disciplinary research and engineering facility of the US Department of Energy (DOE). This paper presents a summary of potentially seismogenic sources for SNL/NM, emphasizing those sources within approximately 8 kilometers (km) of the site. Several significant faults of the central Rio Grande rift transect SNL/NM. Although progress has been made on understanding the geometry and interactions of these faults, little is known of the timing of most recent movement or on recurrent intervals for these faults. Therefore, whether particular faults or fault sections have been active during the Holocene or even the late Pleistocene is undocumented. Although the overall subdued surface expression of many of these faults suggests that they have low to moderate slip rates, the proximity of these faults to critical (e.g., nuclear) and non-critical (e.g., high-occupancy, multistory office/light lab) facilities at SNL/NM requires their careful examination for evaluation of potential seismic hazard.

The neutron scattering community has endorsed the need for a high- power (1 to 5 MW) accelerator-driven source of neutrons for materials research. Properly configured, the accelerator could produce very short (sub-microsecond) bursts of cold neutrons, said time structure offering advantages over the continuous flux from a reactor for a large class of experiments. The recent cancellation of the ANS reactor project has increased the urgency to develop a comprehensive strategy based on the best technological scenarios. Studies to date have built on the experience from ISIS (the 160 KW source in the UK), and call for a high-current (approx. 100 mA peak) H{sup {minus}} source-linac combination injecting into one or more accumulator rings in which beam may be further accelerated. The 1 to 5 GeV proton beam is extracted in a single turn and brought to the target-moderator stations. The high current, high duty-factor, high brightness and high reliability required of the ion source present a very large challenge to the ion source community. A workshop held in Berkeley in October 1994, analyzed in detail the source requirements for proposed accelerator scenarios, the present performance capabilities of different H{sup {minus}} source technologies, and identified necessary R&D efforts to bridge …

This document contains papers presented at the Fuel Cells `95` Review Meeting. Topics included solid oxide fuel cells; DOE`s transportation program; ARPA advanced fuel cell development; molten carbonate fuel cells; and papers presented at a poster session. Individual papers have been processed separately for the U.S. DOE databases.

There are numerous techniques for cooling beams of charged particles including stochastic cooling, electron beam cooling, ionization (foil) cooling (for lepton beams only), and laser cooling which works only with ions with some electrons still attached. The successful implementation of laser cooling at Aarhus, has led to interest in crystalline beams, and it certainly seems that crystallization of small numbers of stored particles should be possible. There are limits, however, that may restrict the total number of charged particles stored; these include the limit on the space-charge tune shift, {vert_bar}{triangle}{nu}{vert_bar} < 0.25 (though the precise number is subject to debate) and intrabeam scattering. In this paper we will be concerned with the possibility of intense crystalline beams; for simplicity we treat only the nonrelativistic case, though the relativistic case is a simple extension of this work. In the next section we review the limits on the number of particles stored and observe that the beam size scaling with beam temperature is the important dependence that determines the limits on the stored current as a function of beam temperature. In section 3 we use a general formalism to determine the beam size scaling and apply it to various kinds of focusing …

Results from the Fermilab charm photoproduction experiment E687 are reviewed. The physics goals and the improvements being made for the next experiment (FOCUS/E831) are described. We expect to accumulate a million fully reconstructed charm decays which represent an order of magnitude improvement over E687.

Estimating terrestrial net primary production (NPP) using remote- sensing tools and ecosystem models requires adequate ground-based measurements for calibration, parameterization, and validation. These data needs were strongly endorsed at a recent meeting of ecosystem modelers organized by the International Geosphere-Biosphere Programme`s (IGBP`s) Data and Information System (DIS) and its Global Analysis, Interpretation, and Modelling (GAIM) Task Force. To meet these needs, a multinational, multiagency project is being coordinated by the IGBP DIS to compile existing NPP data from field sites and to regionalize NPP point estimates to various-sized grid cells. Progress at Oak Ridge National Laboratory (ORNL) on compiling NPP data for grasslands as part of the IGBP DIS data initiative is described. Site data and associated documentation from diverse field studies are being acquired for selected grasslands and are being reviewed for completeness, consistency, and adequacy of documentation, including a description of sampling methods. Data are being compiled in a database with spatial, temporal, and thematic characteristics relevant to remote sensing and global modeling. NPP data are available from the ORNL Distributed Active Archive Center (DAAC) for biogeochemical dynamics. The ORNL DAAC is part of the Earth Observing System Data and Information System, of the US National Aeronautics and …

A Workshop on the Role of Natural Analogs in Geologic Disposal of High-Level Nuclear Waste was held in San Antonio, Texas on July 22--25, 1991. The proceedings comprise seventeen papers submitted by participants at the workshop. A series of papers addresses the relation of natural analog studies to the regulation, performance assessment, and licensing of a geologic repository. Applications of reasoning by analogy are illustrated in papers on the role of natural analogs in studies of earthquakes, petroleum, and mineral exploration. A summary is provided of a recently completed, internationally coordinated natural analog study at Pocos de Caldas, Brazil. Papers also cover problems and applications of natural analog studies in four technical areas of nuclear waste management-. waste form and waste package, near-field processes and environment, far-field processes and environment, and volcanism and tectonics. Summaries of working group deliberations in these four technical areas provide reviews and proposals for natural analog applications. Individual papers have been cataloged separately.

Four different stellarator configurations (a Compact Torsatron, a new modular torsatron, Helias, and a new Modular Helias-like Heliac) were analyzed as fusion power plants and compared with the second-stability ARIES-IV tokamak. The device and plasma parameters were determined by minimizing the projected cost of electricity subject to various constraints. The stellarators were competitive with ARIES-IV for a range of assumptions on confinement models, alpha-particle losses, and beta. 1-D power balance equations were solved for both Lackner-Gottardi confinement scaling with an assumed n{sub e}(r) and for helical-ripple-induced transport with both assumed and calculated forms for n{sub e}(r) and E{sub r}(r).

The basement membrane (BM) extracellular matrix induces differentiation and suppresses apoptosis in mammary epithelial cells, whereas cells lacking BM lose their differentiated phenotype and undergo apoptosis. Addition of purified BM components, which are known to induce {beta}-casein expression, did not prevent apoptosis, indicating that a more complex BM was necessary. A comparison of culture conditions where apoptosis would or would not occur allowed us to relate inhibition of apoptosis to a complete withdrawal from the cell cycle, which was observed only when cells acquired a three-dimensional alveolar structure in response to BM. In the absence of this morphology, both the G1 cyclin kinase inhibitor p21/WAF-I and positive proliferative signals including c-myc and cyclin Dl were expressed and the retinoblastoma protein (Rb) continued to be hyperphosphorylated. When we overexpressed either c-myc in quiescent cells or p21 when cells were still cycling, apoptosis was induced. In the absence of three-dimensional alveolar structures, mammary epithelial cells secrete a number of factors including transforming growth factor a and tenascin, which when added exogenously to quiescent cells induced expression of c-myc and interleukin-{beta}1-converting enzyme (ICE) mRNA and led to apoptosis. These experiments demonstrate that a correct tissue architecture is crucial for long-range homeostasis, suppression of …

=Rapid feedback control is needed for practical microwave processing of continuous ceramic oxide filaments to regulate the process temperature where the dielectric properties of the filaments change rapidly with temperature. A broadband traveling wave tube (TWT) amplifier provides a highly versatile process control platform for filament processing. By comparing a rf signal from the cavity to a reference signal from the TWT, phase information can be used in a negative feedback loop to allow the oscillator to track the cavity frequency as it shifts due to the changing dielectric constant in the filaments being heated. By sampling the field level in the cavity with a detector, amplitude control can be done to maintain a consistent electric field level in the cavity, which is important for controlling the filament heating and temperature. The system design will be discussed along with application data for commercial ceramic samples.

While the inclusion of visual, aural, and tactile senses into virtual reality systems is widespread, the sense of smell has been largely ignored. We have developed a chemical vapor sensing system for the automated identification of chemical vapors (smells). Our prototype chemical vapor sensing system is composed of an array of tin-oxide vapor sensors coupled to an artificial neural net-work. The artificial neural network is used in the recognition of different smells and is constructed as a standard multilayer feed-forward network trained with the backpropagation algorithm. When a chemical sensor array is combined with an automated pattern identifier, it is often referred to as an electronic or artificial nose. Applications of electronic noses include monitoring food and beverage odors, automated flavor control, analyzing fuel mixtures, and quantifying individual components in gas mixtures. Our prototype electronic nose has been used to identify odors from common household chemicals. An electronic nose will potentially be a key component in an olfactory input to a telepresent virtual reality system. The identified odor would be electronically transmitted from the electronic nose at one site to an odor generation system at another site. This combination would function as a mechanism for transmitting olfactory information for telepresence. …

Rapid feedback control is needed for practical microwave processing of continuous ceramic oxide filaments to regulate the process temperature where the -dielectric properties of the filaments change rapidly with temperature. These dielectric changes can produce large rapid changes in the resonant frequency, the reflectivity, and the power density of the cavity. A broadband traveling wave tube (TWT) amplifier provides a highly versatile process control platform for filament processing. By comparing a RF signal from the cavity to a reference signal from the TWT, phase information can be used in a negative feedback loop to allow the oscillator to track the cavity frequency as it shifts due to the changing dielectric constant in the filaments being heated. By sampling the electric field level in the cavity with a detector, amplitude control can be done to maintain a constant absorbed power in a fiber tow, which is important for controlling the tow heating and temperature. This paper describes the design and testing of feedback controller with mullite rods in a single-mode TE{sub 10n} resonator driven by a commercial TWT.

This workshop dealt with engineering aspects and material properties of silicon electronic devices. Crystalline silicon growth, modeling, and properties are discussed in general and as applied to solar cells. Topics considered in discussions of silicon growth include: casting, string ribbons, Al backside contacts, ion implantation, gettering, passivation, and ultrasound treatments. Properties studies include: Electronic properties of defects and impurities, dopant and carrier concentrations, structure and bonding, nitrogen effects, degradation of bulk diffusion length, and recombination parameters. Individual papers from the workshop are indexed separately on the Energy Data Bases.