The conference was organized to review the non-electric, multipurpose uses of geothermal energy in Hungary, Iceland, New Zealand, United States and the USSR. The international viewpoint was presented to provide an interchange of information from countries where non-electric use of geothermal energy has reached practical importance.

The development of hydrothermal energy for direct heat applications is being aided by twenty-two demonstration projects that are funded on a cost-sharing basis by the US Department of Energy, Division of Geothermal Energy. These projects are designed to demonstrate the technical and economic feasibility of the direct use of geothermal heat in the United States. Twelve of these projects are administered by the DOE-Idaho Operations Office with technical support from EG and G Idaho, Inc. Engineering and economic data for these projects are summarized in this paper. The data and experience being generated by these projects will be an important basis for future geothermal direct use projects.

The thermodynamics and kinetics of the fcc (delta) to monoclinic (alpha-prime) phase transformation and its reversion in a plutonium-gallium alloy have been studied using differential scanning calorimetry, resistometry, and dilatometry. Under ambient conditions, the delta phase is metastable in a Pu-2.0 at% Ga alloy. Thermal cycling to below the ambient temperature results in a partial transformation to the alpha-prime phase; this transformation is composition-invariant and exhibits martensitic behavior. Because this transformation results in an unusually invariant large 25% volume contraction that cannot be fully accommodated by purely elastic adjustments, the transformation mode is expected to involve burst formation of individual alpha-prime particles. However, upon cooling, these individual bursts were not resolved by the above techniques, although signals corresponding to the overall accumulation of many alpha-prime particles were observed. On the other hand, upon heating, signals from differential scanning calorimetry, resistometry, and dilatometry showed a series of discrete changes occurring in periodic increments beginning at approximately 32 C. These features correspond to the cooperative reversion of many alpha-prime particles to the delta phase; they appear to be the result of an interplay between the autocatalytically driven reversion of a cascade of individual martensite units, and self-quenching caused by small changes of …

We use Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS) to image and classify individual cells based on their characteristic mass spectra. Using statistical data reduction on the large data sets generated during TOF-SIMS analysis, similar biological materials can be differentiated based on a combination of small changes in protein expression, metabolic activity and cell structure. We apply this powerful technique to image and differentiate three carcinoma-derived human breast cancer cell lines (MCF-7, T47D and MDA-MB-231). In homogenized cells, we show the ability to differentiate the cell types as well as cellular compartments (cytosol, nuclear and membrane). These studies illustrate the capacity of TOF-SIMS to characterize individual cells by chemical composition, which could ultimately be applied to detect and identify single aberrant cells within a normal cell population. Ultimately, we anticipate characterizing rare chemical changes that may provide clues to single cell progression within carcinogenic and metastatic pathways.

'Static' structure functions are the probabilistic distributions computed from the square of the light-front wavefunctions of the target hadron. In contrast, the 'dynamic' structure functions measured in deep inelastic lepton-hadron scattering include the effects of rescattering associated with the Wilson line. Initial- and final-state rescattering, neglected in the parton model, can have a profound effect in QCD hard-scattering reactions, producing single-spin asymmetries, diffractive deep inelastic scattering, diffractive hard hadronic reactions, the breakdown of the Lam-Tung relation in Drell-Yan reactions, nuclear shadowing, and non-universal nuclear antishadowing|novel leading-twist physics not incorporated in the light-front wavefunctions of the target computed in isolation. I also review how 'direct' higher-twist processes--where a proton is produced in the hard subprocess itself--can explain the anomalous proton-to-pion ratio seen in high centrality heavy ion collisions.

I discuss several novel and unexpected aspects of quantum chromodynamics. These include: (a) the nonperturbative origin of intrinsic strange, charm and bottom quarks in the nucleon at large x; the breakdown of pQCD factorization theorems due to the lensing effects of initial- and final-state interactions; (b) important corrections to pQCD scaling for inclusive reactions due to processes in which hadrons are created at high transverse momentum directly in the hard processes and their relation to the baryon anomaly in high-centrality heavy-ion collisions; and (c) the nonuniversality of quark distributions in nuclei. I also discuss some novel theoretical perspectives in QCD: (a) light-front holography - a relativistic color-confining first approximation to QCD based on the AdS/CFT correspondence principle; (b) the principle of maximum conformality - a method which determines the renormalization scale at finite order in perturbation theory yielding scheme independent results; (c) the replacement of quark and gluon vacuum condensates by 'in-hadron condensates' and how this helps to resolve the conflict between QCD vacuum and the cosmological constant.

More than a decade after the explosion of SN 1987A, unresolved discrepancies still remain in attempts to numerically simulate the mixing processes initiated by the passage of a very strong shock through the layered structure of the progenitor star. Numerically computed velocities of the radioactive {sup 56}Ni and {sup 56}CO, produced by shock-induced explosive burning within the silicon layer for example, are still more than 50% too low as compared with the measured velocities. In order to resolve such discrepancies between observation and simulation, an experimental testbed has been designed on the Omega Laser for the study of hydrodynamic issues of importance to supernovae (SNe). In this paper, we present results from a series of scaled laboratory experiments designed to isolate and explore several issues in the hydrodynamics of SN explosions. The results of the experiments are compared with numerical simulations and are generally found to be in reasonable agreement.

None

Spin depolarizing resonances due to coupling may account for as much as a 30 percent loss in polarization in the AGS. The major source of coupling in the AGS is the solenoidal snake. In the past some preliminary work was done to understand this phenomena [1], and a method to overcome these resonances was attempted [2]. However, in the polarized proton run of 2002, the response of these coupled spin.resonances to the strength of the solenoidal snake, skew quadrupoles and vertical and horizontal betatron tune separation was studied to provided a benchmark for a modified DEPOL program [3]. Then using the new DEPOL program, a method to cure the coupled spin resonances in the AGS via spin matching rather than global or local decoupling was explored.

Tailoring of porous materials involves not only chemical synthetic techniques for tailoring microscopic properties such as pore size, pore shape, pore connectivity, and pore surface reactivity, but also materials processing techniques for tailoring the meso- and the macroscopic properties of bulk materials in the form of fibers, thin films and monoliths. These issues are addressed in the context of five specific classes of porous materials: oxide molecular sieves, porous coordination solids, porous carbons, sol-gel derived oxides, and porous heteropolyanion salts. Reviews of these specific areas are preceded by a presentation of background material and review of current theoretical approaches to adsorption phenomena. A concluding section outlines current research needs and opportunities.

Authors of the article assert that imaging has long supported our ability to understand the inner life of plants, their development, and response to a dynamic environment. The purpose of this review was to provide the scientific community with an overview of current imaging methods, which rely variously on either nuclear magnetic resonance (NMR), mass spectrometry (MS) or infrared (IR) spectroscopy, and to present some examples of their application in order to illustrate their utility.

None

Article proposes a model in which, during C-lignin biosynthesis, caffeyl alcohol noncompetitively inhibits oxidation of coniferyl alcohol by cell wall laccases, a process that might limit movement of coniferyl alcohol to the apoplast.

None

We have synthesized (110)-oriented epitaxial thin films of the bilayer (n=2) manganite, La{sub 1.2}Sr{sub 1.8}Mn{sub 2}O{sub 7}, with the metallic/ferromagnetic a-b planes lying perpendicular to the substrate surface and the c-axis aligned in the plane of the film. X-ray diffraction and transmission electron microscopy confirm the alignment of the a-b planes along the [1{bar 1}0] substrate direction. The films consist primarily of the n=2 phase with a minor component of the n=1 (La,Sr){sub 2}MnO{sub 4} and n={infinity} (La,Sr)MnO{sub 3} phases. A resistivity maximum coincides with a ferromagnet/paramagnet transition at a reduced T{sub c}{approx}90K (vs. 120K for bulk), indicative of the effects of epitaxial strain. The films display similar anisotropic properties to their bulk counterpart with the magnetically easy direction confined to the a-b planes and 20-200 times lower resistivity for current flowing along the a-b planes compared to the c-axis.

CPA--Cost and Performance Analysis--is an architecture that supports analysis of physical protection systems and upgrade options. ASSESS (Analytic System and Software for Evaluating Security Systems), a tool for evaluating performance of physical protection systems, currently forms the cornerstone for evaluating detection probabilities and delay times of the system. Cost and performance data are offered to the decision-maker at the systems level and to technologists at the path-element level. A new optimization engine has been attached to the CPA methodology to automate analyses of many combinations (portfolios) of technologies. That engine controls a new analysis sequencer that automatically modifies ASSESS PPS files (facility descriptions), automatically invokes ASSESS Outsider analysis and then saves results for post-processing. Users can constrain the search to an upper bound on total cost, to a lower bound on level of performance, or to include specific technologies or technology types. This process has been applied to a set of technology development proposals to identify those portfolios that provide the most improvement in physical security for the lowest cost to install, operate and maintain at a baseline facility.

None

Power quality testing is important to wind power applications for several reasons. The nature of wind turbine generation is different from conventional power plants. Although windfarms are growing in capacity and diversifying in nature in the U.S. and throughout the globe, there is no standard that addresses the power quality of wind turbines or wind farms. The International Electrotechnical Committee (IEC) has convened Working Group 10 (WG10) to address testing and assessment of power quality characteristics of wind turbines. A IEEE task force has been appointed to reconsider flicker measurement procedures in the U.S. Lastly, power quality tests are now required as part of the certification process for wind turbines. NREL began this work both in response to industry request and in support of the IEC working group. (Mr. Gregory is a member of the IEC working group) This paper presents the NREL Certification Testing Team's effort in developing procedures and equipment for power quality testing for wind turbine certification. Summaries of several power quality standards that are applicable to this process are also presented in this paper.

CD81 is a tetraspanin family member involved in diverse cellular interactions in the immune and nervous systems and in cell fusion events. However, the mechanism of action of CD81 and of other tetraspanins has not been defined. We reasoned that identifying signaling molecules downstream of CD81 would provide mechanistic clues. We engaged CD81 on the surface of Blymphocytes and identified the induced tyrosine-phosphorylated proteins by mass spectrometry. This analysis showed that the most prominent tyrosine phosphorylated protein was ezrin, an actin binding protein and a member of the ezrin-radixin-moesin family. We also found that CD81 engagement induces spleen tyrosine kinase (Syk) and that Syk was involved in tyrosine phosphorylation of ezrin. Ezrin colocalized with CD81 and F-actin upon stimulation and this association was disrupted when Syk activation was blocked. Taken together, these studies suggest a model in which CD81 interfaces between the plasma membrane and the cytoskeleton by activating Syk, mobilizing ezrin, and recruiting F-actin to facilitate cytoskeletal reorganization and cell signaling. This may be a mechanism explaining the pleiotropic effects induced in response to stimulating cells by anti-CD81 antibodies or by the hepatitis C virus, which uses this molecule as its key receptor.

This article finds that the transcript profile of the laccase gene ChLAC8 parallels the accumulation of C-lignin during seed coat development. Recombinant ChLAC8 oxidizes caffeyl and sinapyl alcohols, generating their corresponding dimers or trimers in vitro, but cannot oxidize coniferyl alcohol. The authors propose a basis for this substrate preference based on molecular modeling/docking experiments. Suppression of ChLAC8 expression led to significantly reduced C-lignin content in the seed coats of transgenic Cleome plants. Feeding of 13C-caffeyl alcohol to the Arabidopsis (Arabidopsis thaliana) caffeic acid o-methyltransferase mutant resulted in no incorporation of 13C into C-lignin, but expressing ChLAC8 in this genetic background led to appearance of C-lignin with >40% label incorporation. These results indicate that ChLAC8 is required for C-lignin polymerization and determines lignin composition when caffeyl alcohol is available.