Definitions, capabilities of the calibration system and techniques of calibration are presented.

From p.1 : The purpose of this book is to assist builders, building designers, owners, and operators to find a balance between energy consumption and energy conservation which will result in more cost-effective buildings.

Abstract: This report summarizes the recommendations of a Workshop in Computerized Materials Data as related to engineers in the Nuclear Power Industry. Four areas of discussion are featured: the content of a proposed data system; its size and data sources; the user interfaces and system capabilities; and ways of making further progress. In addition, changes in the use of materials data in the Nuclear Power Industry and progress-to-date in computerizing these data are presented.

From abstract: Standard installation practices were developed to assist in assuring the effectiveness and safety of energy conservation measures installed under the Residential Conservation Service (RCS). They serve as mandatory standards under RCS but are recommended guides for all installations of the covered materials and products. The criteria are being used by DoE to develop training manuals for installers, inspectors, and energy auditors.

Abstract: This manual provides DATAPLOT code solution to a variety of commonly occurring graphical problems. A line-by-line explanation of code is given, along with illustrations and general discussion.

Abstract: Energy-dispersive x-ray analysis with gas proportional detectors has been used widely in x-ray spectrochemical analysis. It was particularly useful in the detection of low-energy x-ray emission, before the commercial availability of the Blodgett-Langmuir pseudocrystals. With the development of solid-state x-ray detectors of high resolution, and improvement in associated electronics and computers, the interest in energy-dispersive x-ray analysis has increased enormously, to the point where it has replaced Bragg crystal diffraction spectrometry in many instances.

Abstract: This book presents the Proceedings of the DoE/NBS Workshop on Environmental Speciation and Monitoring Needs for Trace Metal-Containing Substances from Energy-Related Processes held at the National Bureau of Standards, Gaithersburg, MD, on May 18-20, 1981. The Workshop was sponsored by the Office of Health and Environmental Research, DoE, and the Office of Recycled Materials, NBS. The volume contains refereed papers submitted by 24 invited speakers, along with substantially complete text of the discussion following the papers, edited by the Co-chairpersons. The Proceedings address three major topic areas forming the overall objective of the Workshop: (1) what are the general and specific types of metal- or metalloid-containing substances occurring in energy-related process materials such as coals, oil shales, and waste products? (2) what are the current status and future prospects of element- and compound-specific measurement methods suitable for speciation of trace (ppm, ppb) metal- and metalloid-containing substances transmitted to the environment by energy-processing or waste cycling technologies? (3) for what toxic molecular forms of speciated process effluents should biological dose-response data be generated to assure reliable environmental impact and monitoring measurements? Main questions focused, on providing assurance that the speciation methods (or their development) fit basic bioassay criteria along with …

Abstract: This report is the result of an in-depth review of the recent technical literature on expert systems,. The material contained in this report provided a basis for assessing the potential for using expert systems in emergency management operations. In choosing the material for inclusion in this report, special emphasis was placed on those aspects of expert systems which addressed the types of problems encountered in emergency management operations. The report is designed for use as a resource document and as a tutorial on expert systems and emergency management. Each chapter consists of a brief topic essay followed by a set of references which expand on the main themes of the essay.

Abstract: This directory presents information on 61 U.S. Government certification programs for products and services. Entries describe the scope and nature of each certification program, testing and inspection practices, standards used, methods of identification and enforcement, reciprocal recognition or acceptance of certification, and other relevant details. This directory is part of an ongoing NBS effort to establish and maintain a comprehensive database on standards, regulations, certification programs and related information. This material has bee. compiled to meet the needs of government, industry, and the public for information on U.S. Government certification programs in accordance with the requirements of the U.S. Trade Agreements Act of 1979.

Abstract: This Directory provides limited information about some 388 Federal laboratories with ten or more full-time professionals engaged in research and development. Summary data arranged by Federal agency and by State provide a broad overview of the Federal laboratory system. Laboratory lists by staff size, by State and by agency provide a cross reference. For each laboratory, a contact for obtaining technical information is given by name, address, and phone number. Major mission and major scientific or testing equipment is listed for each laboratory.

Report issued by the U.S. National Bureau of Standards discussing the System Management Facilities for IBM systems. As stated in the introduction, "the purpose of SMF, as stated in the IBM manual, is to provide the means for gathering and recording information that can be used for billing customers or evaluating system usage" (p. 1). This report includes tables, and illustrations.

Abstract: In September 1983, the "8th U. S. - German Seminar of State and Planning on Environmental Specimen Banking" and the "International Review of Environmental Specimen Banking" were held at the National Bureau of Standards. At these meetings the current status of Environmental Specimen Banking Program in the U. S., Federal Republic of Germany (FRG), and other countries was presented and discussed. This publication contains a brief summary of these meetings and separate contributions describing the specimen banking activities in Canada, FRG, Japan, Sweden and the U. S.

Abstract: The National Bureau of Standards is establishing a National Cold Neutron Facility at its 20 MW reactor located in Gaithersburg, Maryland. In order to provide guidance in the development of research plans for the Facility, the Department of Energy and NBS sponsored, on November 14-15, 1985, a workshop on the Investigation of Fundamental Interactions with Cold Neutrons. The 25 papers presented at the workshop are printed in the proceedings.

Abstract: This report presents a long-range plan for roofing research. The plan was developed in response to a need for roofing research addressing major materials problems and changes in low-sloped roofing materials technology. The intent of the plan is to establish the technical basis for developing standards and minimum levels of performance to assist in the selection of cost-effective and durable roofing materials. Four major areas of needed research are identified: (1) low-sloped roofing systems, (2) roofing membranes including single-ply and built-up, (3) thermal insulation for roofing systems, and (4) condition assessment and repair of roofs. Within each research area, a goal is given as well as a number of objectives to achieve the goal. A recommended approach to accomplish each objective is also given.

Abstract: This report documents the initial phases of the MIST database, which is a demonstration project jointly supported by the Department of Energy and the National Bureau of Standards. The purpose of the Materials Information for Science and Technology (MIST) is to demonstrate the power and utility of computer access to materials property data. The initial goals include: to exercise the concept of a computer network of materials databases and to build a demonstration of such a system in a way as to be suitable for use as the core of operational systems in the future. Phases I and II are described in detail. In addition, a discussion is given of the expected usage of the databases.

Abstract: The Workshop on Measurement of Electrical Quantities in Pulse Power Systems addressed measurements in pulse systems having the characteristics of pulse duration less than a millisecond, system voltages greater than 10 kilovolts, and system currents greater than 10 kiloamperes. The presented papers were divided into four categories: voltage measurements; current measurements; power and energy measurements, and data acquisition. Included are discussions of applications of conventional measurement techniques and state-of-the-art systems.

A report on research conducted by the National Engineering Laboratory, the National Measurement Laboratory, and the Institute for Computer Sciences and Technology under the direction of the National Bureau of Standards. It also presents the services and special programs offered by the Bureau to researchers and organizations.

Summary describing research projects and other activities undertaken by the U.S. National Bureau of Standards, lists of publications from the year, and a calendar of upcoming events.

Summary describing research projects and other activities undertaken by the U.S. National Bureau of Standards, lists of publications from the year, and a calendar of upcoming events.

Summary describing research projects and other activities undertaken by the U.S. National Bureau of Standards, lists of publications from the year, and a calendar of upcoming events.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.