A report about investigations of several binary alloy systems of thorium. Some of these alloys containing lead, molybdenum and tin have been prepared in the tungsten arc furnace.

"The wave drag of a combination of slender bodies of revolution at zero angle of attack is studied with a view to determining the arrangements for which the total drag is a minimum. Linearized theory is used to calculate the pressure distribution in the field surrounding the bodies. The interference drag coefficient is computed for different arrangements" (p. 1).

Report presenting a wind-tunnel investigation to determine the effects of a section modification on the aerodynamic characteristics of a wing with 35 degrees of sweepback. The wing was modified by increasing the leading-edge radius of the NACA 64A010 section and adding a small amount of camber to the forward portion of the chord. Lift, drag, pitching-moment, and trailing-edge-flap hinge-moment characteristics of the modified wing are compared with results from the original wing.

An investigation was conducted on an axial-flow-compressor type turbojet engine in the NACA Lewis altitude wind tunnel to determine the operational characteristics of several ignition systems, cross-fire tube configurations and fuel systems over a range of simulated flight conditions. The opposite-polarity-type spark plug provided the most satisfactory ignition. Increasing the cross-fire-tube diameter improved intercombustor flame propagation. At high windmilling speeds, accelerations to approximately 6200 rpm could be made at a preset constant throttle position. The use of a variable-area nozzle reduced acceleration time.

Memorandum presenting an investigation to determine the low-speed aerodynamic characteristics of a 45 degree swept wing with leading-edge inlets. The wing had a constant chord and completely spanned the wind tunnel. Results regarding surface-pressure characteristics, lift and pitching-moment characteristics, wake-drag characteristics, and internal-flow characteristics are provided.

Report presenting a theoretical investigation of an automatic control system with primary sensitivity to normal accelerations as used to control a specific supersonic canard missile. The control system is made up of an integrating servomotor that receives a signal from an accelerometer that is sensitive to normal accelerations of the airframe that it is controlling. The acceleration control system appears to work well for obtaining longitudinal control, but works best when combined with a homing seeker or guidance system for controlling directional space.

Report discussing a study on "the relation of plants to carnotite deposits in several districts of the Colorado Plateau...Basic geobotanical studies were made largely in the Yellow Cat district, near Thompson, Grand County, Utah."

Report presenting the effects of variation of trailing-edge angle and trailing-edge thickness on the lift characteristics of a 10-percent-chord thick symmetrical NACA airfoil section with a 25-percent-chord plain flap as determined from wind tunnel tests over a range of Mach numbers. Results regarding the section lift and pitching-moment characteristics, variation of lift coefficient with flap deflection, schileren photographs, and effect of angle of attack are provided.

Memorandum presenting the results of an investigation to establish rupture and total-deformation strengths at 1200 and 1800 degrees Fahrenheit for typical commercial treatments of low-carbon N-155 alloy. The results show that there were large differences in strength between the heats of bar stock at temperatures above 1200 degrees Fahrenheit except when a 2200 degree Fahrenheit solution treatment was used.

Report of the annual conference on weights and measures, hosted by the U.S. National Bureau of Standards in Washington D.C. It includes conference proceedings, a list of attendees, information about committees and officers, and other reports or commentaries discussed at the meetings.