The reports in this series are designed primarily to familiarize professional land use and resource planners with the range of possibilities and effective procedures for achieving integrated mining, reclamation, and land use planning. These reports are based on a research program which included an extensive literature review, the compilation and analysis of case study data, and close coordination and interaction with related government programs. In Volume 3, A Guide to Mined Area Reclamation Technology for Reclamation and Land Use Planners, the method used to reclaim land in each of several mineral industries are discussed in relation to the physical and cultural constraints that must be considered in planning a reclamation program. Much of the information for this document was obtained from case studies conducted in several mining districts. Volume 3B presents data from a case study of surface mining and reclamation planning, International Minerals and Chemical Corporation, Phosphate Operations, Polk County, Florida.

A study was made of the geology and hydrology of the immediate area around a uranium mill at Ambrosia Lake, New Mexico. The mill was in operation from June 1958 through April 1963 and produced 2.7 x 10/sup 9/ kg of tailings. The possible environmental consequences of this inactive tailings pile must first be delineated so that stabilization needs and future stabilization success can be properly assessed. The Ambrosia Lake area is underlain by over 1000 m of alternating shales, siltstones, and sandstones that dip gently to the northeast into the San Juan Basin. Water-bearing sandstones make up less than 25 percent of this sedimentary section. Water quality in the sandstones is fair to poor, with total dissolved solids ranging from 500 to 2000 mg/l. The present total volume of tailings is estimated at 1.5 x 10/sup 6/ m/sup 3/ and ranges in thickness from about 1 to 10 m. The tailings pile is underlain by the Mancos shale which dips to the northeast. The shale is about 120 m thick with three interbedded silty sandstones that are about 9 m in thickness. One of these sandstones outcrops beneath the western part of the pile; the eastern part of the …

An engineering assessment was performed of the problems resulting from the existence of radioactive uranium mill tailings at the Riverton, Wyoming site. The soil, water and other sample analyses; radiometric measurements to determine areas with radium-contaminated materials; the evaluation of resulting radiation exposures of individuals and nearby populations; the investigation of site geology, hydrology, and meteorology; and the evaluation and costing of alternative corrective actions. Radon gas release from the 900,000 tons of tailings at the Riverton site constitutes the main environmental impact. The two alternative actions presented are fencing and maintenance of the site and off-site remedial action, and decontamination of the millsite and ore storage areas and additional stabilization cover to a minimum of 2 ft. The cost estimates for the options are $460,000 and $1,140,000, respectively. Estimated costs for moving the tailings and all contaminated materials to unspecified sites 5 and 10 mi from the present location are $6,000,000 and $6,400,000, respectively.

Results are reported from an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at the Lakeview, Oregon site. Data ore included from the analyses of soil, water, and other samples; radiometric measurements to determine areas with radium-contaminated materials; evaluation of resulting radiation exposures of individuals and nearby populations; investigation of site geology, hydrology, and meteorology; and evaluation and costing of alternative corrective actions. Radon gas release from the 130,000 tons of tailings at the Lakeview site constitutes the main environmental impact, which is minimal. The two alternative actions presented are maintenance of the site now that the ARCO reclamation program has been completed (Option I); and addition of stabilization cover to a minimum depth of 2 ft, improved fencing, and removal of a few isolated spots of contamination (Option II). The cost estimates for these options are $40,000 and $290,000, respectively.

An engineering assessment was performed of the problems resulting from the existence of radioactive uranium sand residues at the Lowman, Idaho site. Services included the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting investigation of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas release from the 90,000 tons of sand residues at the Lowman site constitutes the most significant environmental impact, although external gamma radiation is also a factor. The two alternative actions presented are dike construction, fencing, and maintenance; and consolidation of the piles, addition of a 2-ft-thick stabilization cover, and on-site cleanup. Both options include remedial action at off-site structures. Cost estimates for the two options are $393,000 and $590,000.

An engineering assessment was performed of the problems resulting from the existence of radioactive uranium mill tailings at the Phillips/United Nuclear site at Ambrosia Lake, New Mexico. Services included the preparation of topographic maps, the performance of core drillings sufficient to determine areas and volumes of tailings and radiometric measurements to determine radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas release from the 2.6 million tons of tailings at the Phillips/United Nuclear site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The estimated radiological health effects to the general population are considered to be minimal. The two alternative actions presented are: dike stabilization, fencing, and maintenance; and adding 2 ft of stabilization cover material. Both options include remedial action at off-site structures and on-site decontamination around the tailings pile. Cost estimates for the two options are $920,000 and $2,230,000, respectively.

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Maybell, Colorado. The Phase II-Title I services include the preparation of topographic maps, the performance of core drillings sufficient to determine areas and volumes of tailings and radiometric measurements to determine radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the 2.6 million tons of tailings at the Maybell site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The three alternative actions presented range from fencing and maintenance (Option I), to placing the tailings in an open-pit mine and adding 2 ft of stabilization cover material (Option III). Cost estimates for the three options range from $250,000 to $4,520,000. Reprocessing the tailings for uranium does not appear to be economically attractive at present.

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at the Monument Valley millsite in Arizona. The Phase II, Title I services include the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting radiation exposures of individuals residing nearby, the investigation of site hydrology and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the tailings on the site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The sparse population and relatively low radiation levels yield minimal immediate environmental impact; hence, the two alternative actions presented are directed towards restricting access to the site (Options I and II), and returning the windblown tailings to the pile and stabilizing the pile with 2 ft of cover material (Option II). Both options include remedial action costs for offsite locations where tailings have been placed. Cost estimates for the two options are $585,000 and $1,165,000. Reprocessing the tailings for uranium is not economically feasible.

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Naturita, Colorado. The Phase II, Title I services include the preparation of topographic maps, the performance of core drillings sufficient to determine areas and volumes of tailings, the performance of radiometric measurements to determine the extent of radium contamination, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology, and the costing of alternative corrective actions. Radon gas release from the 704,000 tons of tailings at the Naturita site constitutes the most significant environmental impact although windblown tailings and external gamma radiation are also factors. Ranchers Exploration and Development Company has been licensed by the State of Colorado to reprocess the tailings at a location 3 mi from the present site where they will be stabilized for long-term storage. The remedial action options include remedial action for structures in Naturita and Nucla (Option I) at an estimated cost of $270,000 and remedial action for structures and open land adjacent to the tailings site (Option II) at an estimated cost of $950,000.

An engineering assessment was performed of the problems resulting from the existence of radioactive uranium mill tailings at the Spook Site, Converse County, Wyoming. Services include the performance of core drillings, soil, water and other sample analyses, radiometric measurements to determine areas with radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site geology, hydrology, and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the 187,000 tons of tailings at the Spook Site constitutes the main environmental impact, which is negligible. The two alternative actions presented are better fencing of the site in its present state, and placing tailings and contaminated on-site materials and soil in the open-pit mine and covering the resulting pile with 2 ft of overburden materials. The cost estimates for the options are $81,000 and $142,000, respectively.

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Rifle, Colorado. The Phase II - Title I services include the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the 3.1 million tons of tailings at the two Rifle sites, constitutes the most significant environmental impact. Windblown tailings, external gamma radiation and localized contamination of surface waters are other environmental effects. The 15 alternative remedial action options presented range from millsite decomtamination and off-site remedial action (Options I and IV), to adding various depths of stabilization cover material (Options II, V, VI, and VII), to removal of the tailings to long-term storage sites and decontamination of the present sites (Options III and VIII through XV). Cost estimates for the first 14 options range from $224,000 to $20,300,000. Option XV, estimated at $32,200,000, includes the cost for moving both Rifle …

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Naturita, Colorado. The Phase II, Title I services include the preparation of topographic maps, the performance of core drillings sufficient to determine areas and volumes of tailings, the performance of radiometric measurements to determine the extent of radium contamination, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology, and the costing of alternative corrective actions. Radon gas release from the 704,000 tons of tailings at the Naturita site constitutes the most significant environmental impact although windblown tailings and external gamma radiation are also factors. Ranchers Exploration and Development Company has been licensed by the State of Colorado to reprocess the tailings at a location 3 mi from the present site where they will be stabilized for long-term storage. The remedial action options include remedial action for structures in Naturita and Nucla (Option I) at an estimated cost of $270,000 and remedial action for structures and open land adjacent to the tailings site (Option II) at an estimated cost of $950,000.

Ford, Bacon and Davis Utah Inc. has performed an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at Shiprock, New Mexico. The Phase II, Title I services include the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting radiation exposures of individuals and nearby populations, the investigation of site hydrology and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the 1.7 million tons of tailings at the Shiprock site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The 11 alternative actions presented range from completion of the present ongoing EPA site decontamination plan (Option I), to stabilizing in-place with varying depths of cover material (Options II-IV), to removal to an isolated long-term disposal site (Options V-XI). All options include remedial action costs for off-site locations where tailings have been placed. Costs estimates for the 11 options range from $540,000 to $12,500,000. Reprocessing the tailings for uranium is not economically feasible.

An engineering assessment was made of the problems resulting from the existence of radioactive uranium mill tailings at the Monument Valley millsite in Arizona. The Phase II, Title I services include the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting radiation exposures of individuals residing nearby, the investigation of site hydrology and meteorology and the evaluation and costing of alternative corrective actions. Radon gas release from the tailings on the site constitutes the most significant environmental impact, although windblown tailings and external gamma radiation are also factors. The sparse population and relatively low radiation levels yield minimal immediate environmental impact; hence, the two alternative actions presented are directed towards restricting access to the site and returning the windblown tailings to the pile and stabilizing the pile. Both options include remedial action costs for offsite locations where tailings have been placed. Cost estimates for the two options are $585,000 and $1,165,000.

Results are reported from an engineering assessment of the problems resulting from the existence of radioactive uranium mill tailings at the Lakeview, Oregon site. Results are included from the analyses of soil, water, and other samples; radiometric measurements to determine areas with radium-contaminated materials; evaluation of resulting radiation exposures of individuals and nearby populations; investigation of site geology, hydrology, and meteorology; and evaluation and costing of alternative corrective actions. Radon gas release from the 130,000 tons of tailings at the Lakeview site constitutes the main environmental impact, which is minimal. The two alternative actions presented are maintenance of the site now that the ARCO reclamation program has been completed (Option I); and addition of stabilization cover to a minimum depth of 2 ft, improved fencing, and removal of a few isolated spots of contamination (Option II). The cost estimates for these options are $40,000 and $290,000, respectively.

The Energy Research and Development Administration (ERDA) is sponsoring a program to explore the possibilities for beneficially using the temperature difference between warm surface water of the tropical oceans and the deeper colder water to operate a heat engine. One of the major technical hurdles that must be crossed to bring this source of energy into commercial use is the solution to biofouling, corrosion and deposition reactions that are expected to reduce heat transfer efficiency. In January 1976, ERDA established a project activity office at Battelle-Northwest whose mission it is to develop, procure, monitor and evaluate projects to define, prevent and/or alleviate biofouling and corrosion problems expected in OTEC power plants. Since startup, this project activity office has developed a methodology to guide work, assumed responsibility or contracted for 10 projects and expects to have several more contractors work on various aspects of biofouling and corrosion problems in the near future. The priorities for near and intermediate term work are identified and the operation of the Project Activity Office is described.

A 6.4-mm thick Armak E-63 cationic asphalt emulsion-Vitro subsoil seal was capable of preventing permeation of RaCl/sub 2/ in 0.5 N HCl solution, radon, and nitrogen under 3.6 kg/cm/sup 2/ (50 psi) overpressure for a 17-day period. (DLC)

Weekly student newspaper from McMurry College in Abilene, Texas that includes local, state and campus news along with advertising.

This report contains a summary of the effects of liquid waste discharges from steam electric generating facilities on the environment. Also included is a simplified model for use in approximately determining the effects of these discharges. Four basic fuels are used in steam electric power plants: three fossil fuels--coal, natural gas, and oil; and uranium--presently the basic fuel of nuclear power. Coal and uranium are expected to be the major fuels in future years. The following power plant effluents are considered: heat, chlorine, copper, total dissolved solids, suspended solids, pH, oil and grease, iron, zinc, chrome, phosphorus, and trace radionuclides.

An engineering assessment was performed of the problems resulting from the existence of radioactive uranium sand residues at the Lowman, Idaho, site. Services normally include the preparation of topographic maps, the performance of core drillings and radiometric measurements sufficient to determine areas and volumes of tailings and other radium-contaminated materials, the evaluation of resulting investigations of site hydrology and meteorology, and the evaluation and costing of alternative corrective actions. Radon gas release from the 90,000 tons of sand residues at the Lowman site constitutes the most significant environmental impact, although external gamma radiation is also a factor. The two alternative actions presented are dike construction, fencing, and maintenance (Option I); and consolidation of the piles, addition of a 2-ft-thick stabilization cover, and on-site cleanup (Option II). Both options include remedial action at off-site structures. Cost estimates for the two options are $393,000 and $590,000.

Nitric acid leaching of representative uranium ores and mill tailings from the western U.S. mining districts removes up to 98% of the /sup 226/Ra and /sup 230/Th, yielding a residue containing 17 to 60 pCi of radium per gram. At best, this is an order of magnitude greater than that in surrounding soils, but about the same level as a standard proposed for building materials in the United Kingdom. Data are also presented on the water penetration and leaching of tailings, the solubility of BaSO/sub 4/, and radon emanation coefficients of ores, tailings, and nitric acid-leached residues.

This report evaluates the state of the art and effectiveness of physical coal cleaning as a potential strategy for controlling SO/sub x/ emissions in coal fired power generation. Coal properties which are significantly altered by physical coal cleaning were determined. The effects of the changes in properties as they relate to pulverized coal firing, fluidized bed combustion and low Btu gasification for combined cycle powered generation were studied. Available coal washability data were integrated by computer with U.S. coal reserve data. Approximately 18% of the demonstrated coal reserve were matched with washability data. Integrated data appear in the Appendix. Current coal preparation practices were reviewed. Future trends were determined. Five process flow sheets representing increasing levels of cleaning sophistication were prepared. The clean product from each flow sheet will meet U.S. EPA New Source Performance Standards. Capital and operating costs for each case were estimated. Environmental control technology and environmental impact associated with current coal preparation and cleaning operations were assessed. Physical coal cleaning is widely practiced today. Where applicable it represents the least expensive method of coal sulfur reduction. Developmental physical and chemical coal cleaning processes were studied. The chemical methods have the advantage of being able to remove …

Bench-scale pilot plant studies were conducted to evaluate chemical coagulation and ion exchange for decontamination of 2724-W laundry wastewater. Chemical coagulation is accomplished at pH 11 to avoid complexant problems and assure good transuranic radionuclide removals. Clinoptilolite is used to remove cesium and strontium. Results of the pilot plant studies are summarized as follows: Decontamination factors of 70 (strontium) and more than 100 (cesium) were achieved by chemical coagulation and ion exchange. Decontamination factors exceeding 90 were measured for europium by coagulation with a combination of ferric chloride, magnesium chloride, and calcium chloride added to the wastewater at pH 11. Coagulation with these three agents in the wastewater at pH 11 was more effective for turbidity removal than coagulation with lime. Addition of up to 1.7 lb of clinoptilolite fines per 1000 gallons of wastewater during coagulation did not substantially increase strontium and cesium removal. Filtration without chemical coagulation reduced suspended solids by only 25%. About 70% of the suspended solids remaining in the filtered wastewater were removed in the zeolite column causing plugging which could not be easily dislodged by backwashing. Plugging of the ion exchange columns by previously clarified wastewater required short periods of limited backwashing to relieve …

An experimental investigation was carried out to improve the froth flotation method of separating coal pyrite. The effect of several surface active agents on the floatability of an Iowa coal and its associated pyrite was studied in both the presence and absence of methyl isobutyl carbinol (MIBC), a commonly used frother. The effectiveness of a special method of chemical pretreatment for depressing pyrite was also investigated. The zeta potential of the same coal and pyrite was measured under the same conditions used in the flotation tests (in the absence of frother). In the absence of MIBC, the floatability of coal and pyrite was low, and appeared to depend on pH. The maximum recovery of pyrite was obtained at a pH of 4.5 with recovery being less at higher or lower pH. The addition of a small amount of MIBC significantly increased the recovery of coal and pyrite with the increase in the recovery of coal being much greater than the increase in the recovery of pyrite. Also in the presence of MIBC, the floatability of coal and pyrite seemed to be affected more by pH than in the absence of MIBC. On the other hand, several potential pyrite depressants were …