From abstract: I propose the use of a template method for quantitative, correct, and transparent measurement of signal power to additive noise power ratios (SNR) of digital signals and systems under full operating conditions. Outer guard chips of digital templates hold intersymbol interference fixed on inner target chips in realizations of the respective template patterns in traffic. The proposed template method needs to be developed and proven as a potentially valuable metrology capability; it can be especially important for real time online performance assessment and monitoring of digital communication systems.

Abstract: A method is presented for determining the impulse and step responses of a shielded cable using time domain terminal measurements and a physically based mathematical model for the transmission line properties of the cable. The method requires a computer controlled time domain measurement system and was implemented using the NBS Automatic Pulse Measurement System (APMS). Data are also developed for the frequency domain complex propagation function (attenuation and its related minimum-phase shift). The method is applied to 12 shielded paired-conductor (balanced) cables and 5 coaxial cables. Time domain responses are presented for three nominal cable lengths, 60 m (200 ft), 150 m (500 ft), and 300 m (1000 ft). The time domain responses are applied to the estimation of bit error rate increases due to the insertion of the cables into a digital signaling system employing a balanced polar NRZ waveform. Also discussed is the application of the time domain responses to time domain reflectometry techniques for cable acceptance tests and field-site testing of installed cables.

Introduction: Small aperture theory is used to investigate the dual TEM cell. Analyzing coupling through an empty versus a loaded aperture leads to a model of dual TEM cell shielding effectiveness measurements. Small obstacle scattering yields results for both the field perturbation and the change in a cell's transmission line characteristics due to the presence of a test object in a TEM cell. In each case, theoretical values are compared to experimental data.

Abstract: This report presents the results of work at the National Bureau of Standards, Boulder, Colorado, to carefully evaluate, document, develop (when necessary), and describe the methodology for performing radiated susceptibility/vulnerability measurements using a reverberation chamber. The report describes the reverberation chamber theory of operation, construction, evaluation, functional operation, and use for performing immunity measurements. It includes an estimate of measurement uncertainties derived empirically from test results and from comparisons with anechoic chamber measurements. Finally, it discusses the limitations and advantages of the measurement technique to assist potential users in determining the applicability for this technique to their electromagnetic compatibility (EMC) measurement needs.

From introduction: This note describes the design and error analysis of a WR10 thermal noise power standard. The standard is designed to operate at the boiling point of liquid nitrogen with a noise temperature accurate to plus or minus 1 K.

Abstract: This bibliography contains approximately 450 citations of papers concerning the characterization of optical fiber waveguides. Papers from scientific journals, trade journals and conferences are included along with book chapters. The citations of organized by parameter measured and measurement method. Where published abstracts are available they are included.

From abstract: The material included in this report is intended for a short course on electromagnetic compatibility/interference (EMC/EMI) metrology to be offered jointly by the staff of the Fields Characterization Group (723.03) and the Interference Characterization Group (723.04) of the Electromagnetic Fields Division (723). The purpose of this short course is to present a review of some of the radiated EMC/EMI measurement methods, to which the National Bureau of Standards (NBS) at Boulder, Colorado, has made significant contributions during the past two decades.

Abstract: The problem of measuring and characterizing complicated multiple-source, multiple-frequency electromagnetic environments is becoming more important and more difficult as electrical devices proliferate. This paper outlines three general approaches to the problem which are currently under investigation at the National Bureau of Standards. The three approaches are: 1) a statistical treatment of the spatial distribution of electromagnetic field intensities, 2) a numerical computation using a finite-difference (or lattice) form of the electromagnetic action functional, and 3) use of a directional probe to scan a volume. All three methods are still in the development stage, but each appears promising.

Abstract: Selected publications of the Ion Storage Group of the Time and Frequency Division, NBS, Boulder, Colorado.

Description of 15 specific systems employing search-type selection principles.

From introduction: The purpose of this Technical Note is to describe refracted-ray scanning in detail, to analyze it as a measurement system, to document a particular system for implementing it, and to show some exemplary results.

from Introduction: The measurement accuracy of the optical time-domain reflectometer (OTDR) is restricted in some applications by a limited operational dynamic range and by a lack of standardized test procedures. In an effort to better understand these restrictions, we have measured the range of linearity of some avalanche photodiodes used as backscatter detectors. Also, the effect of input launch conditions is examined and a possible standardized OTDR test procedure is proposed. Using these suggestions, we have made comparisons between attenuation values determined by cutback and backscatter methods and found that good agreement is possible. Finally, some methods are described for checking the response. linearity of OTDR systems.

Abstract: This report describes a system based on electromagnetic-acoustic transducers (EMATs) as an approach to automated nondestructive evaluation of thick weldments (>25 mm). Good signal-to-noise ratios, often a problem with EMATs, were possibTe through careful design of the transducers and associated electronic circuits and the use of signal averaging. At 454 kHz, the transducers produce shear-horizontal waves of approximately 7-mm wavelength in steel. The long wavelength permits determination of through-thickness flaw depth from the amplitudes of scattered ultrasonic waves. A minicomputer controlled transducer positioning and acquired the digitized ultrasonic waveforms for synthetic aperture processing. The synthetic aperture technique further improved signal quality and yielded flaw localization through the weld thickness. Measurements on artificial flaws demonstrated a detectability threshold of 0.5 mm (through thickness) and sizing ability up to 2.5 mm, in agreement with theoretical predictions. Details include the design of the transducers and electronics, as well as the mechanical positioner, signal processing algorithms, and complete computer program listing.

Parameters determined by a least-squares method for the reduced Simon equation and for a new, empirical melting equation.

Summarizes progress to date on the formulation and numerical integration of systems of equations modeling general two-phase flows in a pipe.

Review of the progress in research, instrumentation, and service activities of the Spectrochemical Analysis Section from July 1970 to June 1971.

The survey covers PVT, thermodynamic, thermal, transport, electrical radiative and mechanical properties.