"A flight test of the Aero jet Engineering Corporation's 7KS-6000 T-27 Jato rocket motor was conducted at the Langley Pilotless Aircraft Research Station at Wallops Island, Va, to determine the flight performance characteristics of the motor. The flight test imposed an absolute longitudinal acceleration of 9.8 g upon the rocket motor at 2.8 seconds after launching. The total impulse developed by the motor was 43,400 pound-seconds, and the thrusting time was 7.58 seconds" (p. 1).

Report presenting an investigation of the effects of adding leading-edge roughness to the surfaces of an unswept, untapered, 6-percent-thick, circular-arc-airfoil wing equipped with a full-span, 0.2-chord, plain, trailing-edge aileron. Results regarding the rolling-effectiveness data, addition of roughness on a wing, and variation of drag coefficient are provided.

Report discusses the development and testing of a rocket-propelled test vehicle to investigate aerodynamic control effectiveness at high subsonic, transonic, and supersonic speeds. Modifications to the section thickness and wing sweepback to improve performance are also described. A description of the vehicle, instrumentation, accuracy, and evaluation of testing results is included.

From Summary: "The aeroelastic effects on wing-aileron rolling effectiveness and drag of thin flat-plate delta wings with 45 degree swept leading edge and plain constant-chord ailerons have been investigated. This investigation has been carried out over a Mach number range of 0.7 to 1.6 by means of rocket-propelled test vehicles in free flight. The results show a near-linear decrease in lateral control effectiveness with a decrease in the wing torsional stiffness. An aileron-effectiveness reversal was experienced with the more flexible delta-wing models."

Report discussing an investigation to determine the effects of aeroelasticity on the rolling effectiveness of a model of a McDonnell F3H-1 airplane wing. The plane was found to be subject to aeroelastic losses that varied with Mach number and altitude.

Report presenting an investigation to determine the effects of aeroelasticity on the rolling effectiveness of an 8.06-percent-scale model of the McDonnell F3H-1 airplane wing. The investigation used rocket-propelled models in free flight over a range of Mach numbers. The results indicate that the airplane is subject to aeroelastic losses varying from about 7 percent at Mach number 0.5 to 46 percent at Mach number 0.90 at sea level.

Report presenting the results of flight tests showing lateral oscillation in the Bell X-1 and calculations created to determine the effects of changes in several mass and aerodynamic parameters on the lateral oscillations. Calculations indicate that lateral stability should be improved by a more positive inclination of the principal axis of inertia or a reduction of the value of yawing moment of inertia.

Report presenting testing of two rocket-propelled research models to determine the effect of the intersection of thin aerodynamic surfaces and the effect of moderate sweepback of thick aerodynamic surfaces on low-lift buffeting. Results regarding trim changes and drag are also provided. It was discovered that low-lift buffeting may be induced at high subsonic speeds by interference due to the intersection of thin aerodynamic surfaces.

Memorandum presenting a two-dimensional wind-tunnel investigation of the effects of maximum-thickness location on fluctuating pressures and normal-force coefficients on 9-percent-thick airfoils, which indicated that for normal-force coefficients up to 0.6, the section variables had little effect on the pressure pulsations and root-mean-square normal-force-coefficient fluctuations. Results regarding pressure fluctuations and normal-force-coefficient fluctuations are provided.

Report presenting testing of low-aspect-ratio triangular-plan-form lifting surfaces located on conical and cylindrical portions of a body have been determined at Mach number 1.2 and several subsonic speeds to determine if the aerodynamic characteristics of these surfaces at supersonic speeds could be improved by locating them in the subsonic conical-flow field. Results regarding lift and drag coefficients and lift-curve slopes are provided.

Report presenting a flight investigation of four air-to-air missiles mounted by pylons on a rocket-powered basic wingless buffet-research vehicle to determine the trim, buffet, and drag characteristics of the combination.

"Approximately 2,000 flights of rocket-propelled models have been made in which model configuration, model size, type and number of booster rockets, number of booster stages, and booster arrangements varied. A brief summary of the results obtained with some of the more unusual arrangements, descriptions of boosting hardware and techniques, and discussions of some factors responsible for the choice of these configurations are presented in this paper. The results show that unconventional boosting techniques may be used successfully when conventional tandem arrangements are unsuitable or unwieldy" (p. 1).

Report presenting an investigation of the intensity of root-mean-square pressure pulsations and root-mean-square normal-force-coefficient fluctuations conducted on two high-lift airfoils and two 6-series airfoils. Results regarding the factors affecting comparison of data from various test facilities, root-mean-square pressure pulsations, and root-mean-square force fluctuations are provided.

Report presenting a flight and preflight evaluation of an automatic thrust-coefficient control system in a twin-engine ram-jet missile. A flicker-type single-loop servocontrol system is shown to be a usable way of controlling ram-jet thrust coefficients.

Report discussing an investigation into the effects of camber and leading-edge-flap deflection on the pressure pulsations on thin rigid airfoils at a range of Mach numbers. The ideal camber or flap deflection was found to be dependent on Mach number and normal-force coefficient. The results of this testing, which used a 64A006 airfoil, was compared to previous testing using a 65A006 airfoil.

Report presenting information about airfoil section normal-force, drag, pitching-moment, flap-normal-force, and hinge-moment characteristics at Mach numbers from 0.5 to 1.0 on an NACA 64A006 airfoil with 15-percent-chord leading-edge flap. Differing results were noted in the Mach ranges of 0.5 to 0.8 and over 0.8.

Memorandum presenting a mechanism for the thermal decomposition of sodium, lithium, beryllium, magnesium, aluminum, and boron alkyls and for the reverse reaction, the addition of olefins to metal hydrides. The reactions are shown to be nonradical and to probably proceed through a cyclic intermediate.

Report presenting an investigation of the characteristics of a low-aspect-ratio wing at high subsonic Mach numbers in the high-speed tunnel. The wing model had an NACA 65-108 airfoil section, an aspect ratio of 4.01, a taper ratio of 0.498, and no twist or dihedral. Results regarding normal-force characteristics, pitching-moment characteristics, and drag characteristics are provided.

Memorandum presenting an investigation to determine the automatic lateral stability characteristics of a model equipped with a gyro stabilizing unit that gave response to bank and yaw. Stable flights were obtained with the flicker-type automatic control, and the amplitude of the oscillations was decreased by adding the attachment which provided hunting control.

"A two-dimensional wind-tunnel investigation of the flow and force characteristics of four NACA 6A-series airfoils with thickness ratios of 4, 6, and 9 percent has been conducted in the Langley airfoil test apparatus at at transonic Mach numbers between 0.8 and 1.25. The Reynolds number range for these tests varied from 2.6 x 10(6) to 2.8 x 10(6). As was expected, the airfoils exhibited a smooth transition in force coefficients from a Mach number of 1.0 to the values obtained at the higher speeds. Lift-curve slope and maximum lift-drag ratio correlated very well on a basis of the transonic similarity laws at Mach numbers above 1.0, but below that value the correlation was not good" (p. 1).

Report presenting longitudinal frequency-response characteristics of a 35 degree swept-wing airplane computed from flight measurements. Also presented are pitching-velocity frequency responses to displacements of the adjustable stabilizer. Results regarding frequency-response curves, transfer functions, elevator effectiveness, altitude variations, and potential errors in data are provided.

Memorandum presenting a summary of the effects of plan form and thickness on the lift and drag characteristics of wings at transonic speeds. The data was obtained during a transonic research program conducted in the high-speed 7- by 10-foot tunnel by the transonic-bump method. Results regarding lift, drag at zero lift, and drag due to lift are provided.

Memorandum presenting an analysis of a large number of liquid-metal-to-air heat-exchanger cores for the nuclear-powered liquid-metal turbojet cycle to determine which types yield the best overall net thrust per total engine weight. The performances of all exchangers considered were initially evaluated at a median condition. The performance of the best of each of the four types was compared with that of a shell-and-tube exchanger with the air flowing through the tubes, operating at the same condition.

Report presenting flight tests over a range of Mach numbers to study the effects of a simulated afterburning turbojet engine on the gross longitudinal flight characteristics of two geometrically identical models of a swept-wing fighter-type configuration. Results regarding the trim characteristics, lift, pitching moment, dynamic stability, and drag are provided.