Thermal properties of niobium-modified PZT95/5(1.8Nb) and PSZT ceramics used for the ferroelectric power supply have been studied from -100 C to 375 C. Within this temperature range, these materials exhibit ferroelectric-ferroelectric and ferroelectric-paraelectric phase transformations. The thermal expansion coefficient, heat capacity, and thermal diffusivity of different phases were measured. Thermal conductivity and Grueneisen constant were calculated at several selected temperatures between -60 C and 100 C. Results show that thermal properties of these two solid solutions are very similar. Phase transformations in these ceramics possess first order transformation characteristics including thermal hysteresis, transformational strain, and enthalpy change. The thermal strain in the high temperature rhombohedral phase region is extremely anisotropic. The heat capacity for both materials approaches to 3R (or 5.938 cal/(g-mole*K)) near room temperature. The thermal diffusivity and the thermal conductivity are quite low in comparison to common oxide ceramics, and are comparable to amorphous silicate glass. Furthermore, the thermal conductivity of these materials between -60 C and 100 C becomes independent of temperature and is sensitive to the structural phase transformation. These phenomena suggest that the phonon mean free path governing the thermal conductivity in this temperature range is limited by the lattice dimensions, which is in good …

A search for the pair production of scalar top quarks, {bar t}, has been performed in 360 pb{sup -1} of data from p{bar p} collisions at a center-of-mass energy of 1.96 TeV, collected by the D0 detector at the Fermilab Tevatron collider. The {bar t} decay mode considered is {bar t} {yields} c{bar {chi}}{sub 1}{sup 0}, where {bar {chi}}{sub 1}{sup 0} is the lightest supersymmetric particle. The topology analyzed therefore consists of a pair of acoplanar heavy-flavor jets with missing transverse energy. The data show good agreement with the standard model expectation, and a 95% C.L. exclusion domain in the (m{sub {tilde t}}, m{sub {tilde {chi}}{sub 1}{sup 0}}) plane has been determined, extending the domain excluded by previous experiments.

Mentoring is an established strategy for learning that has its root in antiquity. Most, if not all, successful scientists and engineers had an effective mentor at some point in their career. In the context of scientists and engineers, mentoring has been undefined. Reports addressing critical concerns regarding the future of science and engineering in the U.S. mention the practice of mentoring a priori, leaving organizations without guidance in its application. Preliminary results from this study imply that formal mentoring can be effective when properly defined and operationalized. Recognizing the uniqueness of the individual in a symbiotic mentor-protégé relationship significantly influences a protégé’s learning experience which carries repercussions into their career intentions. The mentor-protégé relationship is a key factor in succession planning and preserving and disseminating critical information and tacit knowledge essential to the development of leadership in the science and technological industry.

It has been shown that thermal energy imparted to a metallic substrate by laser heating induces a transient temperature gradient through the thickness of the sample. In favorable conditions of laser fluence and absorptivity, the resulting inhomogeneous thermal strain leads to a measurable permanent deflection. This project established parameters for laser micro forming of thin materials that are relevant to MESA generation weapon system components and confirmed methods for producing micrometer displacements with repeatable bend direction and magnitude. Precise micro forming vectors were realized through computational finite element analysis (FEA) of laser-induced transient heating that indicated the optimal combination of laser heat input relative to the material being heated and its thermal mass. Precise laser micro forming was demonstrated in two practical manufacturing operations of importance to the DOE complex: micrometer gap adjustments of precious metal alloy contacts and forming of meso scale cones.

We report a new measurement of the t{bar t} production cross section in p{bar p} collisions at a center-of-mass energy of 1.96 TeV using events with one charged lepton (electron or muon), missing transverse energy, and jets. Using 425 pb{sup -1} of data collected using the D0 detector at the Fermilab Tevatron Collider, and enhancing the t{bar t} content of the sample by tagging b jets with a secondary vertex tagging algorithm, the t{bar t} production cross section is measured to be: {sigma}{sub p{bar p} {yields} t{bar t}+X} = 6.6 {+-} 0.9(stat + syst) {+-} 0.4(lum) pb. This cross section is the most precise D0 measurement to date for t{bar t} production and is in good agreement with standard model expectations.

Biweekly, comprehensive compilation of decisions, reports, public notices, and other documents of the U.S. Federal Communications Commission.

This report describes the development of a computational systems biology approach to evaluate the hypotheses of molecular and cellular mechanisms of adaptive response to low dose ionizing radiation. Our concept is that computational models of signaling pathways can be developed and linked to biologically based dose response models to evaluate the underlying molecular mechanisms which lead to adaptive response. For development of quantitatively accurate, predictive models, it will be necessary to describe tissues consisting of multiple cell types where the different types each contribute in their own way to the overall function of the tissue. Such a model will probably need to incorporate not only cell type-specific data but also spatial information on the architecture of the tissue and on intercellular signaling. The scope of the current model was more limited. Data obtained in a number of different biological systems were synthesized to describe a chimeric, “average” population cell. Biochemical signaling pathways involved in sensing of DNA damage and in the activation of cell cycle checkpoint controls and the apoptotic path were also included. As with any computational modeling effort, it was necessary to develop these simplified initial descriptions (models) that can be iteratively refined. This preliminary model is a …

The D0 experiment is based at the Tevatron, which is currently the world's highest-energy accelerator. The detector comprises three major subsystems: the tracking system, the calorimeter and the muon detector. Jets, seen in the calorimeter, are the most common product of the proton-proton interactions at 2TeV. This thesis is divided into two parts. The first part focuses on jets and describes the derivation of a jet energy scale using p{bar p} {yields} (Z + jets) events as a cross-check of the official D0 jet energy scale (Versions 4.2 and 5.1) which is derived using p{bar p} {yields} {gamma} + jets events. Closure tests were also carried out on the jet energy calibration as a further verification. Jets from b-quarks are commonly produced at D0, readily identified and are a useful physics tool. These require a special correction in the case where the b-jet decays via a muon and a neutrino. Thus a semileptonic correction was also derived as an addition to the standard energy correction for jets. The search for the Higgs boson is one of the largest physics programs at D0. The second part of this thesis describes a search for the Standard Model Higgs boson in the ZH …

Results obtained from a search for the trilepton signature {mu}{mu}{ell} (with {ell} = e, or {mu}) are combined with two complementary searches for the trilepton signatures ee{ell} and eer and interpreted in the framework of R-parity violating Supersymmetry. Pairwise, R-parity conserving production of the supersymmetric particles is assumed, followed by R-parity violating decays via an LL{bar E}-operator with one dominant coupling {lambda}{sub 122}. An LL{bar E}-operator couples two weak isospin doublet and one singlet (s)lepton fields and thus violates lepton number conservation. The data, collected with the D0 detector at the Fermilab proton-antiproton collider Tevatron, corresponds to an integrated luminosity of {integral} L dt = 360 {+-} 23 pb{sup -1}. No evident is observed, while 0.41 {+-} 0.11(stat) {+-} 0.07(sys) events are expected from Standard Model processes. The resulting 95% confidence level cross section limits on new physics producing a {mu}{mu}{ell} signature in the detector are of the order of 0.020 to 0.136 pb. They are interpreted in two different supersymmetry scenarios: the mSUGRA and the MSSM model. The corresponding lower limits on the masses of the lightest neutralino ({tilde {chi}}{sub 1}{sup 0}) and the lightest chargino ({tilde {chi}}{sub 1}{sup {+-}}) in case of the mSUGRA model are found to …

The purpose of this Study is to provide an economic review of current and proposed changes to the Select Area Fishery Evaluation Project (SAFE or Project). The Study results are the information requested in comments made on the Project by a joint review dated March 2005 by the Northwest Power and Conservation Council (NPCC) Independent Scientific Review Panel (ISRP) and Independent Economic Analysis Board (IEAB). North et al. (2006) addressed technical questions about operations and plans, and this report contains the response information for comments concerning Project economics. This report can be considered an economic feasibility review meeting guidelines for cost-effective analysis developed by the IEAB (2003). It also contains other economic measurement descriptions to illustrate the economic effects of SAFE. The SAFE is an expansion of a hatchery project (locally called the Clatsop Economic Development Council Fisheries Project or CEDC) started in 1977 that released an early run coho (COH) stock into the Youngs River. The Youngs River entrance to the Columbia River at River Mile 12 is called Youngs Bay, which is located near Astoria, Oregon. The purpose of the hatchery project was to provide increased fishing opportunities for the in-river commercial fishing gillnet fleet. Instead of just …

In August 1981, the proton beam from the rapid cycling synchrotron (RCS) was first delivered to the Intense Pulsed Neutron Source (IPNS) neutron scattering target and now, in June 2006, it is with great joy that we celebrate the impending 25th anniversary of this event. This edition of the IPNS Progress Report will focus on the development and scientific accomplishments of the past 5 years, since our last Progress Report, but with some mention of the 25 years of IPNS experience. It is appropriate at this anniversary date to recall some of the more significant historic events that have led to the present IPNS and discuss some of the plans that will lead to even more successes. Below is a brief chronology that captures some of the developments of IPNS: 8/4/81 - First beam delivered to the neutron scattering target; 6/10/84 - IPNS produced its one billionth neutron pulse; 1/10/85 - Installed world's first solid methane moderator; 6/30/87 - 1000th experiment performed at IPNS; 9/19/87 - IPNS produced its two billionth neutron pulse; 11/20/91 - 2000th experiment performed at IPNS; 4/17/04 - IPNS produced its eight billionth neutron pulse; and 8/19/05 - 7000th experiment performed at IPNS. During the past …

The main purpose of this project was to advance the basic scientific understanding of colloid and colloid-facilitated Cs transport of radionuclides in the vadose zone. We focused our research on the hydrological and geochemical conditions beneath the leaking waste tanks at the USDOE Hanford reservation. Specific objectives were (1) to determine the lability and thermodynamic stability of colloidal materials, which form after reacting Hanford sediments with simulated Hanford Tank Waste, (2) to characterize the interactions between colloidal particles and contaminants, i.e., Cs and Eu, (3) to determine the potential of Hanford sediments for \textit{in situ} mobilization of colloids, (4) to evaluate colloid-facilitated radionuclide transport through sediments under unsaturated flow, (5) to implement colloid-facilitated contaminant transport mechanisms into a transport model, and (6) to improve conceptual characterization of colloid-contaminant-soil interactions and colloid-facili\-tated transport for clean-up procedures and long-term risk assessment. We have previously shown that upon contact with simulated waste tank solutions, Hanford sediments change their mineralogical composition. Certain minerals, i.e., quartz, smectite, and kaolinite, are partially dissolved, and new mineral phases, i.e., the feldspathoids cancrinite and sodalite, are formed. We have characterized these mineral transformations and clarified the mineral transformation pathways. The new minerals were mainly in the colloidal size …

Biweekly, comprehensive compilation of decisions, reports, public notices, and other documents of the U.S. Federal Communications Commission.