Report presenting drag measurements made on a 10-percent-thick wing and 8-percent-thick tail and a 8-percent-thick wing, 6-percent-thick tail version of the X-1 airplane at a variety of Mach numbers. The drag of the thicker wing was found to be much higher than that of the thinner wing. The fuselage was found to cause interference with the wing of both models, making the separation of wing and fuselage drag difficult to determine.

Report discussing testing of a model of the pilotless aircraft RM-1 to measure aileron hinge moments in flight in order to determine the reason for loss of roll stabilization at supercritical speeds in flight. The aileron was found to become quickly underbalanced over the full deflection range at supercritical speeds. Information about the general flight behavior, aileron hinge moments, and roll stabilization of the model is provided.

Report presenting pressure distributions over a prolate spheroid of fineness ratio 6 and over a combination of this body with an NACA 65-010 wing section for a range of Mach numbers. Results regarding wall and sting interference, nature of flow over a model in the transonic region, development of supersonic flow from subsonic flow, and a comparison of experimental and theoretical flow at subsonic stream Mach numbers are provided.

Report presenting an investigation of the effects of adding leading-edge roughness to the surfaces of an unswept, untapered, 6-percent-thick, circular-arc-airfoil wing equipped with a full-span, 0.2-chord, plain, trailing-edge aileron. Results regarding the rolling-effectiveness data, addition of roughness on a wing, and variation of drag coefficient are provided.

Report presenting an investigation of the characteristics of a low-aspect-ratio wing at high subsonic Mach numbers in the high-speed tunnel. The wing model had an NACA 65-108 airfoil section, an aspect ratio of 4.01, a taper ratio of 0.498, and no twist or dihedral. Results regarding normal-force characteristics, pitching-moment characteristics, and drag characteristics are provided.

Memorandum presenting a summary of the effects of plan form and thickness on the lift and drag characteristics of wings at transonic speeds. The data was obtained during a transonic research program conducted in the high-speed 7- by 10-foot tunnel by the transonic-bump method. Results regarding lift, drag at zero lift, and drag due to lift are provided.

"Three rocket-propelled buffet-research models have been flight tested to determine the buffeting characteristics of a swept-wing- airplane configuration with the horizontal tail operating near the wing wake. The models consisted of parabolic bodies having 45 deg sweptback wings of aspect ratio 3.56, at aspect ratio of 0.3, NACA 64A007 airfoil sections, and tail surfaces of geometry and section identical to the wings. Two tests were conducted with the horizontal tail located in the wing chord plane with fixed incidence angles of -1.5deg on one model and 0deg on the other model" (p. 1).