Report presenting a flight investigation to determine the comparative performance of AN-F-58 and AN-F-32 fuels in a 4000-pound-thrust turbojet engine. The fuels were equivalent over the range of conditions investigated. Results regarding corrected net thrust, corrected jet-fuel consumption, variation of corrected tail-pipe temperature, combustor blow-out speeds, and visual observations of the jet exhaust are provided.

From Introduction: "Analyses that provide a basis for comparing the centrifugal-stress distributions inherent in jet-engine turbine blades of several designs currently in use were therefore made and are presented."

Memorandum presenting the results of a wind-tunnel investigation of the low-speed characteristics of horizontal tails of aspect ratio 3 with unswept and swept-back plan forms. Two models were tested which had identical areas, aspect ratio, taper ratio, and airfoil section, differing only in the angle of sweepback and elevator area ratios. The major effect of sweepback was to increase the rate of change of hinge-moment coefficient with angle of attack, to reduce the rate of change with elevator deflection, and to reduce the elevator effectiveness.

Report presenting the total drag coefficients of 60 degree cone cylinders of fineness ratio 2.07 measured in free flight from Mach numbers of 1.5 to 8.2. Results regarding the smooth 60 degree cone cylinder, rifled models, and discontinuity lines in the shadowgraph pictures are provided.

Memorandum presenting a description of the Ames supersonic free-flight wind tunnel, which is a new piece of equipment for aerodynamic research at high supersonic Mach numbers. It has a wide Mach number range extending from low supersonic speeds to Mach numbers in excess of 10. The air stream in the tunnel is imperfect, mainly due to a symmetrical pair of oblique shock waves which reflect down the test section.

Report presenting an experimental investigation in a one-sixth sector of an annular turbojet combustor to determine a method of controlling radial exhaust-gas-temperature distribution in a gas-turbine combustion chamber. The adjustment in controlling air was made by ducting the dilution air into the combustion zone in a predetermined manner through hollow radial struts or by modifying the basket-wall open-hole area. Results regarding the temperature distribution, temperature-rise efficiency, total-pressure loss, and altitude operating limits are provided.

Report presenting a method for calculating the drag, in a real compressible fluid and at subcritical Mach numbers, of airfoil sections at arbitrary life coefficients and of bodies of revolution at zero angle of attack. The values of drag coefficient are compared with values obtained for the same configurations by other methods. The differences between the results are found to lie withint he limits of accuracy of current experimental techniques.

Memorandum presenting a description of the equipment used in the Ames supersonic free-flight wind tunnel to obtain the data necessary to measure the aerodynamic characteristics of free-flying models. The model is fired from a gun into the supersonic air stream of a blowdown-type wind tunnel. The action resulting from aerodynamic forces is computed from a time-distance-attitude record of the model flight through the test section.