Modern wireless communication systems use spectrally efficient modulation schemes to reach high data rate transmission. These schemes are generally involved with signals with high peak-to-average power ratio (PAPR). Moreover, the development of next generation wireless communication systems requires the power amplifiers to operate over a wide frequency band or multiple frequency bands to support different applications. These wide-band and multi-band solutions will lead to reductions in both the size and cost of the whole system. This dissertation presents several advanced power amplifier solutions to provide wide-band and multi-band operations with efficiency improvement at power back-offs.

In this thesis two collaborative localization techniques are studied: multidimensional scaling (MDS) and maximum likelihood estimator (MLE). A synthesis of a new location estimation method through a serial integration of these two techniques, such that an estimate is first obtained using MDS and then MLE is employed to fine-tune the MDS solution, was the subject of this research using various simulation and experimental studies. In the simulations, important issues including the effects of sensor node density, reference node density and different deployment strategies of reference nodes were addressed. In the experimental study, the path loss model of indoor environments is developed by determining the environment-specific parameters from the experimental measurement data. Then, the empirical path loss model is employed in the analysis and simulation study of the performance of collaborative localization techniques.

The vehicular community is moving towards a whole new paradigm with the advancement of new technology. Vehicular communication not only supports safety services but also provides non-safety services like navigation support, toll collection, web browsing, media streaming, etc. The existing communication frameworks like Dedicated Short Range Communication (DSRC) and Cellular V2X (C-V2X) might not meet the required capacity in the coming days. So, the vehicular community needs to adopt new technologies and upgrade the existing communication frameworks so that it can fulfill the desired expectations. Therefore, an increment in reliability and data rate is required. Multiple Input Multiple Output (MIMO), 5G New Radio, Low Density Parity Check (LDPC) Code, and Massive MIMO signal detection and equalization algorithms are the latest addition to the 5G wireless communication domain. These technologies have the potential to make the existing V2X communication framework more robust. As a result, more reliability and throughput can be achieved. This work demonstrates these technologies' compatibility and positive impact on existing V2X communication standard.

Significant research efforts have been devoted to large-scale dynamical systems, with the aim of understanding their complicated behaviors and managing their responses in real-time. One pivotal technological obstacle in this process is the existence of uncertainty. Although many of these large-scale dynamical systems function well in the design stage, they may easily fail when operating in realistic environment, where environmental uncertainties modulate system dynamics and complicate real-time predication and management tasks. This dissertation aims to develop systematic methodologies to evaluate the performance of large-scale dynamical systems under uncertainty, as a step toward real-time decision support. Two uncertainty evaluation approaches are pursued: the analytical approach and the effective simulation approach. The analytical approach abstracts the dynamics of original stochastic systems, and develops tractable analysis (e.g., jump-linear analysis) for the approximated systems. Despite the potential bias introduced in the approximation process, the analytical approach provides rich insights valuable for evaluating and managing the performance of large-scale dynamical systems under uncertainty. When a system’s complexity and scale are beyond tractable analysis, the effective simulation approach becomes very useful. The effective simulation approach aims to use a few smartly selected simulations to quickly evaluate a complex system’s statistical performance. This approach was originally developed …

Language can sometimes be an impediment in communication. Whether we are talking about people who speak different languages, students who are learning a new language, or people with language disorders, the understanding of linguistic representations in a given language requires a certain amount of knowledge that not everybody has. In this thesis, we propose "translation through pictures" as a means for conveying simple pieces of information across language barriers, and describe a system that can automatically generate pictorial representations for simple sentences. Comparative experiments conducted on visual and linguistic representations of information show that a considerable amount of understanding can be achieved through pictorial descriptions, with results within a comparable range of those obtained with current machine translation techniques. Moreover, a user study conducted around the pictorial translation system reveals that users found the system to generally produce correct word/image associations, and rate the system as interactive and intelligent.

Mobile phones are one of the essential parts of modern life. Making a phone call is not the main purpose of a smart phone anymore, but merely one of many other features. Online social networking, chatting, short messaging, web browsing, navigating, and photography are some of the other features users enjoy in modern smartphones, most of which are provided by mobile apps. However, with this advancement, many security vulnerabilities have opened up in these devices. Malicious apps are a major threat for modern smartphones. According to Symantec Corp., by the middle of 2013, about 273,000 Android malware apps were identified. It is a complex issue to protect everyday users of mobile devices from the attacks of technologically competent hackers, illegitimate users, trolls, and eavesdroppers. This dissertation emphasizes the concept of intention identification. Then it looks into ways to utilize this intention identification concept to enforce security in a mobile phone platform. For instance, a battery monitoring app requiring SMS permissions indicates suspicious intention as battery monitoring usually does not need SMS permissions. Intention could be either the user's intention or the intention of an app. These intentions can be identified using their behavior or by using their source code. Regardless …

Resilient networks have the ability to provide the desired level of service, despite challenges such as malicious attacks and misconfigurations. The primary goal of this dissertation is to be able to provide uninterrupted network services in the face of an attack or any failures. This dissertation attempts to apply control system theory techniques with a focus on system identification and closed-loop feedback control. It explores the benefits of system identification technique in designing and validating the model for the complex and dynamic networks. Further, this dissertation focuses on designing robust feedback control mechanisms that are both scalable and effective in real-time. It focuses on employing dynamic and predictive control approaches to reduce the impact of an attack on network services. The closed-loop feedback control mechanisms tackle this issue by degrading the network services gracefully to an acceptable level and then stabilizing the network in real-time (less than 50 seconds). Employing these feedback mechanisms also provide the ability to automatically configure the settings such that the QoS metrics of the network is consistent with those specified in the service level agreements.

The architecture of mobile networks has dramatically evolved in order to fulfill the growing demands on wireless services and data. The radio resources, which are used by the current mobile networks, are limited while the users demands are substantially increasing. In the future, tremendous Internet applications are expected to be served by mobile networks. Therefore, increasing the capacity of mobile networks has become a vital issue. Heterogeneous networks (HetNets) have been considered as a promising paradigm for future mobile networks. Accordingly, the concept of small cell has been introduced in order to increase the capacity of the mobile networks. A femtocell network is a kind of small cell networks. Femtocells are deployed within macrocells coverage. Femtocells cover small areas and operate with low transmission power while providing high capacity. Also, UEs can be offloaded from macrocells to femtocells. Thus, the capacity can be increased. However, this will introduce different technical challenges. The interference has become one of the key challenges for deploying femtocells within a certain macrocells coverage. Undesirable impact of the interference can degrade the performance of the mobile networks. Therefore, radio resource management mechanisms are needed in order to address key challenges of deploying femtocells. The objective of …

The future wireless communication systems are required to meet the growing demands of reliability, bandwidth capacity, and mobility. However, as corruptions such as fading effects, thermal noise, are present in the channel, the occurrence of errors is unavoidable. Motivated by this, the work in this dissertation attempts to improve the system performance by way of exploiting schemes which statistically reduce the error rate, and in turn boost the system throughput. The network can be studied using a simplified model, the two-way relay channel, where two parties exchange messages via the assistance of a relay in between. In such scenarios, this dissertation performs theoretical analysis of the system, and derives closed-form and upper bound expressions of the error probability. These theoretical measurements are potentially helpful references for the practical system design. Additionally, several novel transmission methods including block relaying, permutation modulations for the physical-layer network coding, are proposed and discussed. Numerical simulation results are presented to support the validity of the conclusions.

This dissertation focuses on a novel area of secure data management referred to as data cooperatives. A data cooperative solution promises its users better protection and control of their personal data as compared to the traditional way of their handling by the data collectors (such as governments, big data companies, and others). However, despite the many interesting benefits that the data cooperative approach tends to provide its users, it suffers from a few challenges hindering its development, adoption, and widespread use among data providers and consumers. To address these issues, we have divided this dissertation into two parts. In the first part, we identify the existing challenges and propose and implement a decentralized architecture built atop a blockchain system. Our solution leverages the inherent decentralized, tamper-resistant, and security properties of the blockchain. The implementation of our system was carried out on an existing blockchain test network, Ropsten, and our results show that blockchain is an efficient and scalable platform for the development of a decentralized data cooperative solution. In the second part of this work, we further addressed the existing challenges and the limitations of the implementation from the first part of our work. In particular, we addressed inclusivity---a core …

Human body is a complex system organized at different levels such as cells, tissues and organs, which contributes to 11 important organ systems. The functional efficiency of this complex system is evaluated as health. Traditional healthcare is unable to accommodate everyone's need due to the ever-increasing population and medical costs. With advancements in technology and medical research, traditional healthcare applications are shaping into smart healthcare solutions. Smart healthcare helps in continuously monitoring our body parameters, which helps in keeping people health-aware. It provides the ability for remote assistance, which helps in utilizing the available resources to maximum potential. The backbone of smart healthcare solutions is Internet of Things (IoT) which increases the computing capacity of the real-world components by using cloud-based solutions. The basic elements of these IoT based smart healthcare solutions are called "things." Things are simple sensors or actuators, which have the capacity to wirelessly connect with each other and to the internet. The research for this dissertation aims in developing architectures for these things, focusing on IoT-based smart healthcare solutions. The core for this dissertation is to contribute to the research in smart healthcare by identifying applications which can be monitored remotely. For this, application-specific thing architectures …

I present a time synchronization algorithm for wireless sensor networks that aims to conserve sensor battery power. The proposed method creates a hierarchical tree by flooding the sensor network from a designated source point. It then uses a hybrid algorithm derived from the timing-sync protocol for sensor networks (TSPN) and the reference broadcast synchronization method (RBS) to periodically synchronize sensor clocks by minimizing energy consumption. In multi-hop ad-hoc networks, a depleted sensor will drop information from all other sensors that route data through it, decreasing the physical area being monitored by the network. The proposed method uses several techniques and thresholds to maintain network connectivity. A new root sensor is chosen when the current one's battery power decreases to a designated value. I implement this new synchronization technique using Matlab and show that it can provide significant power savings over both TPSN and RBS.

A local call admission control (CAC) algorithm for third generation wireless networks was designed and implemented, which allows for the simulation of network throughput for different spreading factors and various mobility scenarios. A global CAC algorithm is also implemented and used as a benchmark since it is inherently optimized; it yields the best possible performance but has an intensive computational complexity. Optimized local CAC algorithm achieves similar performance as global CAC algorithm at a fraction of the computational cost. Design of a dynamic channel assignment algorithm for IEEE 802.11 wireless systems is also presented. Channels are assigned dynamically depending on the minimal interference generated by the neighboring access points on a reference access point. Analysis of dynamic channel assignment algorithm shows an improvement by a factor of 4 over the default settings of having all access points use the same channel, resulting significantly higher network throughput.

Compressed sensing has been proposed as a computationally efficient method to estimate the finite-dimensional signals. The idea is to develop an undersampling operator that can sample the large but finite-dimensional sparse signals with a rate much below the required Nyquist rate. In other words, considering the sparsity level of the signal, the compressed sensing samples the signal with a rate proportional to the amount of information hidden in the signal. In this dissertation, first, we employ compressed sensing for physical layer signal processing of directional millimeter-wave communication. Second, we go through the theoretical aspect of compressed sensing by running a comprehensive theoretical analysis of compressed sensing to address two main unsolved problems, (1) continuous-extension compressed sensing in locally convex space and (2) computing the optimum subspace and its dimension using the idea of equivalent topologies using Köthe sequence. In the first part of this thesis, we employ compressed sensing to address various problems in directional millimeter-wave communication. In particular, we are focusing on stochastic characteristics of the underlying channel to characterize, detect, estimate, and track angular parameters of doubly directional millimeter-wave communication. For this purpose, we employ compressed sensing in combination with other stochastic methods such as Correlation Matrix Distance …

The widely used mobile phone, as well as its related technologies had opened opportunities for a complete change on how people interact and build relationship across geographic and time considerations. The convenience of instant communication by mobile phones that broke the barrier of space and time is evidently the key motivational point on why such technologies so important in people's life and daily activities. Mobile phones have become the most popular communication tools. Mobile phone technology is apparently changing our relationship to each other in our work and lives. The impact of new technologies on people's lives in social spaces gives us the chance to rethink the possibilities of technologies in social interaction. Accordingly, mobile phones are basically changing social relations in ways that are intricate to measure with any precision. In this dissertation I propose a socioscope model for social network, relationship and human behavior analysis based on mobile phone call detail records. Because of the diversities and complexities of human social behavior, one technique cannot detect different features of human social behaviors. Therefore I use multiple probability and statistical methods for quantifying social groups, relationships and communication patterns, for predicting social tie strengths and for detecting human behavior …

Reliable communication over the noisy channel has become one of the major concerns in the field of digital wireless communications. The low density parity check codes (LDPC) has gained lot of attention recently because of their excellent error-correcting capacity. It was first proposed by Robert G. Gallager in 1960. LDPC codes belong to the class of linear block codes. Near capacity performance is achievable on a large collection of data transmission and storage.In my thesis I have focused on hardware implementation of (3, 6) - regular LDPC codes. A fully parallel decoder will require too high complexity of hardware realization. Partly parallel decoder has the advantage of effective compromise between decoding throughput and high hardware complexity. The decoding of the codeword follows the belief propagation alias probability propagation algorithm in log domain. A 9216 bit, (3, 6) regular LDPC code with code rate ½ was implemented on FPGA targeting Xilinx Virtex 4 XC4VLX80 device with package FF1148. This decoder achieves a maximum throughput of 82 Mbps. The entire model was designed in VHDL in the Xilinx ISE 9.2 environment.

Due to the long duration required to perform manual knowledge entry by human knowledge engineers it is desirable to find methods to automatically acquire knowledge about the world by accessing online information. In this work I examine using the Cyc ontology to guide the creation of Naïve Bayes classifiers to provide knowledge about items described in Wikipedia articles. Given an initial set of Wikipedia articles the system uses the ontology to create positive and negative training sets for the classifiers in each category. The order in which classifiers are generated and used to test articles is also guided by the ontology. The research conducted shows that a system can be created that utilizes statistical text classification methods to extract information from an ad-hoc generated information source like Wikipedia for use in a formal semantic ontology like Cyc. Benefits and limitations of the system are discussed along with future work.

The demand for higher data rates for indoor and cell-edge users led to evolution of small cells. LTE femtocells, one of the small cell categories, are low-power low-cost mobile base stations, which are deployed within the coverage area of the traditional macro base station. The cross-tier and co-tier interferences occur only when the macrocell and femtocell share the same frequency channels. Open access (OSG), closed access (CSG), and hybrid access are the three existing access-control methods that decide users' connectivity to the femtocell access point (FAP). We define a network performance function, network productivity, to measure the traffic that is carried successfully. In this dissertation, we evaluate call mobility in LTE integrated network and determine optimized network productivity with variable call arrival rate in given LTE deployment with femtocell access modes (OSG, CSG, HYBRID) for a given call blocking vector. The solution to the optimization is maximum network productivity and call arrival rates for all cells. In the second scenario, we evaluate call mobility in LTE integrated network with increasing femtocells and maximize network productivity with variable femtocells distribution per macrocell with constant call arrival rate in uniform LTE deployment with femtocell access modes (OSG, CSG, HYBRID) for a given …

The thesis simulates the problem of network connectivity that occurs due to the dynamic nature of a network during flight. Nine nodes are provided with initial positions and are flown based on the path provided by leader-follower control algorithm using the server-client model. The application layer provides a point to point connection between the server and client and by using socket programming in the transport layer, a server and clients are established. Each node performs a neighbor discovery to discover its neighbors in the data link layer and physical layer performs the CSMA/CA using RTS/CTS. Finally, multi hop routing is achieved in network layer. Each client connects with server at dedicated interval to share each other location and then moves to next location. This process is continued over a period of several iterations until the relative distance is achieved. The constraints and limitations of the technology are network connectivity is lack of flexibility for random location of nodes, links established with a distant node having single neighbor is unstable. Performance of a system decreases with increase in number of nodes.

Publicly available datasets in health science are often large and observational, in contrast to experimental datasets where a small number of data are collected in controlled experiments. Variables' causal relationships in the observational dataset are yet to be determined. However, there is a significant interest in health science to discover and analyze causal relationships from health data since identified causal relationships will greatly facilitate medical professionals to prevent diseases or to mitigate the negative effects of the disease. Recent advances in Computer Science, particularly in Bayesian networks, has initiated a renewed interest for causality research. Causal relationships can be possibly discovered through learning the network structures from data. However, the number of candidate graphs grows in a more than exponential rate with the increase of variables. Exact learning for obtaining the optimal structure is thus computationally infeasible in practice. As a result, heuristic approaches are imperative to alleviate the difficulty of computations. This research provides effective and efficient learning tools for local causal discoveries and novel methods of learning causal structures with a combination of background knowledge. Specifically in the direction of constraint based structural learning, polynomial-time algorithms for constructing causal structures are designed with first-order conditional independence. Algorithms of …

Component failures can result in catastrophic behaviors in safety critical embedded systems, sometimes resulting in loss of life. Component failures can be treated as off nominal behaviors (ONBs) with respect to the components and sub systems involved in an embedded system. A lot of research is being carried out to tackle the problem of ONBs. These approaches are mainly focused on the states (i.e., desired and undesired states of a system at a given point of time to detect ONBs). In this paper, an approach is discussed to detect component failures and critical components of an embedded system. The approach is based on fault tree analysis (FTA), applied to the requirements specification of embedded systems at design time to find out the relationship between individual component failures and overall system failure. FTA helps in determining both qualitative and quantitative relationship between component failures and system failure. Analyzing the system at design time helps in detecting component failures and critical components and helps in devising strategies to mitigate component failures at design time and improve overall safety and reliability of a system.

The presence of naturally occurring and man-made public health threats necessitate the design and implementation of mitigation strategies, such that adequate response is provided in a timely manner. Since multiple variables, such as geographic properties, resource constraints, and government mandated time-frames must be accounted for, computational methods provide the necessary tools to develop contingency response plans while respecting underlying data and assumptions. A typical response scenario involves the placement of points of dispensing (PODs) in the affected geographic region to supply vaccines or medications to the general public. Computational tools aid in the analysis of such response plans, as well as in the strategic placement of PODs, such that feasible response scenarios can be developed. Due to the sensitivity of bio-emergency response plans, geographic information, such as POD locations, must be kept confidential. The generation of synthetic geographic regions allows for the development of emergency response plans on non-sensitive data, as well as for the study of the effects of single geographic parameters. Further, synthetic representations of geographic regions allow for results to be published and evaluated by the scientific community. This dissertation presents methodology for the analysis of bio-emergency response plans, methods for plan optimization, as well as methodology …

The major challenges facing resource constraint wireless devices are error resilience, security and speed. Three joint schemes are presented in this research which could be broadly divided into error correction based and cipher based. The error correction based ciphers take advantage of the properties of LDPC codes and Nordstrom Robinson code. A cipher-based cryptosystem is also presented in this research. The complexity of this scheme is reduced compared to conventional schemes. The securities of the ciphers are analyzed against known-plaintext and chosen-plaintext attacks and are found to be secure. Randomization test was also conducted on these schemes and the results are presented. For the proof of concept, the schemes were implemented in software and hardware and these shows a reduction in hardware usage compared to conventional schemes. As a result, joint schemes for error correction and security provide security to the physical layer of wireless communication systems, a layer in the protocol stack where currently little or no security is implemented. In this physical layer security approach, the properties of powerful error correcting codes are exploited to deliver reliability to the intended parties, high security against eavesdroppers and efficiency in communication system. The notion of a highly secure and reliable …

In this dissertation, I focus on source coding techniques as well as channel coding techniques. I addressed the challenges in WSN by developing (1) a new source coding strategy for erasure channels that has better distortion performance compared to MDC; (2) a new cooperative channel coding strategy for multiple access channels that has better channel outage performances compared to MIMO; (3) a new source-channel cooperation strategy to accomplish source-to-fusion center communication that reduces system distortion and improves outage performance. First, I draw a parallel between the 2x2 MDC scheme and the Alamouti's space time block coding (STBC) scheme and observe the commonality in their mathematical models. This commonality allows us to observe the duality between the two diversity techniques. Making use of this duality, I develop an MDC scheme with pairwise complex correlating transform. Theoretically, I show that MDC scheme results in: 1) complete elimination of the estimation error when only one descriptor is received; 2) greater efficiency in recovering the stronger descriptor (with larger variance) from the weaker descriptor; and 3) improved performance in terms of minimized distortion as the quantization error gets reduced. Experiments are also performed on real images to demonstrate these benefits. Second, I present a …