N/A

None

"In this paper we solve for the diffracted wave which results when a weak hydromegnetic shock impinges on a rigid perfectly conducting half plans."

Two IBM-704 codes have been written which are auxiliary to the Bevatron orbit code BOC. The first, BEFCYF, interpolates among tabulated values of the median-plane magnetic flux density of the Bevatron to produce an equivalent array of values in a form appropriate to BOC. The second, DBDT, produces azimuthal derivatives of the fields produced by BEFCYF. The internal operation of BEFCYF and DBDT is described, and instructions for their execution are given.

Requirements of minimum beam loss for hand-on maintenance and flexibility for future operations are essential for the lattice design of the Spallation Neutron Source (SNS) accumulator ring. In this paper, we present a hybrid lattice that consists of FODO arcs and doublet straights, emphasizing injection and collimation optimization and flexibility, split tunes for coupling control, sextupole families for chromaticity control, and compatibility to future upgrades.

None

During the g-2 run at the BNL AGS in early 2000, a 200 MeV storage-ring-like magnetic cycle has been set-up and tuned at the Booster in preparing for the Spallation Neutron Source (SNS) accumulator ring study. In this article, we report the progress of the machine set-up, tuning, some preliminary studies, and the future plan.

None

This paper summarizes physical and engineering issues of high-intensity synchrotrons and accumulators, and discusses future applications and outlook.

We have studied the evolution of the structural properties as well as the static and dynamic spin correlations of spin ice Ho2Ti2O7, where Ho was partially replaced by non-magnetic La. The crystal structure of diluted samples Ho2-xLaxTi2O7 was characterized by x-ray and neutron diffraction and by Ho L-III-edge and Ti K-edge extended x-ray absorption fine structure (EXAFS) measurements. It is found that the pyrochlore structure remains intact until about x = 0.3, but a systematic increase in local disorder with increasing La concentration is observed in the EXAFS data, especially from the Ti K edge.Quasi-elastic neutron scattering and ac susceptibility measurements show that, in x<= 0.4 samples at temperatures above macroscopic freezing, the spin -spin correlations are short ranged and dynamic in nature. The main difference with pure spin ice in the dynamics is the appearance of a second, faster, relaxation process.

The low-temperature geothermal resource of portions of Yakima County, south-central Washington, is defined by several least squares linear regression analyses of bottom-hole temperature and depth data. Intra-borehole flow prevents the use of borehole temperature gradients for geothermal resource assessment. Bottom-hole temperature and depth data were separated into fourteen well data groups based on geographic proximity, land slope azimuth, and position within the regional ground-water flow system. The regression analyses of these well data groups indicate that the projected land-surface temperature and geothermal gradient range from 10.6 to 14.0/sup 0/C and from 24.9 to 52.2/sup 0/C/km, respectively. The depth to the 20/sup 0/C isotherm ranges from 142 to 346m. The average projected land-surface temperature and geothermal gradient are approximately 11.3/sup 0/C and 43.0/sup 0/C/km, respectively. The average depth to the 20/sup 0/C isoterm is approximately 202m. The projected land-surface temperature appears to decrease and the depth to the 20/sup 0/C isotherm appears to increase as the land-surface elevation of the well dat group increases. Stratigraphic correlation diagrams developed from borehole geophysical and lithologic logs are given for localities within the lower Yakima, Black Rock, Moxee, Ahtanum, Cowiche, and Naches valleys. These correlation diagrams are combined with their respective borehole temperatue logs …

The low-temperature geothermal resource of portions of Yakima County, south-central Washington, is defined by several least squares linear regression analyses of bottom-hole temperature and depth data. Bottom-hole temperature and depth data were separated into fourteen well data groups based on geographic proximity, land slope azimuth, and position within the regional ground-water flow system. The depths of these wells range from over 50m to almost 600m. The regression analyses of these well data groups indicate that the projected land-surface temperature and geothermal gradient range from 10.6 to 14.0/sup 0/C and from 24.9 to 52.2/sup 0/C/km, respectively. Stratigraphic correlation diagrams developed from borehole geophysical and lithologic logs are given for localities within the lower Yakima, Black Rock, Moxee, Ahtanum, Cowiche, and Naches valleys. These correlation diagrams are combined with their respective borehole temperature logs and well data group predicted temperature curves to assess the validity of the regression analyses and to determine aquifer locations, temperatures, and directions of intra-borehole flow. A regression analysis of data from wells of south-central Washington with bottom-hole depths of over 700m to almost 3km suggests that the projected land-surface temperature and geothermal gradient of this depth interval are 21.8/sup 0/C and 31.3/sup 0/C/km, respectively. The depth to …

Studies were initiated at the Hanford Site to evaluate the process controlling the transport of fluids in the vadose zone and to develop a reliable database upon which vadose-zone transport models can be calibrated. These models are needed to evaluate contaminant migration through the vadose zone to underlying groundwaters at Hanford. A study site that had previously been extensively characterized using geophysical monitoring techniques was selected in the 200 E Area. Techniques used previously included neutron probe for water content, spectral gamma logging for radionuclide tracers, and gamma scattering for wet bulk density. Building on the characterization efforts of the past 20 years, the site was instrumented to facilitate the comparison of nine vadose-zone characterization methods: advanced tensiometers, neutron probe, electrical resistance tomography (ERT), high-resolution resistivity (HRR), electromagnetic induction imaging (EMI), cross-borehole radar, and cross-borehole seismic.

The background, operation, and need for solar thermal powered pumps for irrigation is reviewed, and a compilation of 38 literature references with summaries is presented. (WHK)

Pressure to change the nominating system mounted in the turbulent political climate of the 1960s, due to the perception that the process was undemocratic. A transforming event occurred at the Democratic convention in 1968, where violent confrontations between war protesters and the Chicago police outside the convention hall, and bitter credentials disputes inside, spurred Democrats to completely change the party's nominating rules. The new rules transferred the power of choosing delegates from party leaders to rank-and-file voters, opening the process to widespread popular participation for the first time. Many state parties switched to primaries to comply with the newly adopted national party rules. The Republican Party also modified its rules in the early 1970s.

None

From Introduction: "The general objective of this report is a study of the characteristics of the described form of peak holding control. The control has not yet been used in experimental turbojet-engine study.This study is concerned with only one method of extracting the maximum amount of information from a peak output for the purpose of maintaining that peak. The criteria sought in this control process are: maintenance of peak average output, minimum duration of time in undesirable operation, quickness in response to command to reach peak condition, least amount of excursion in the undesirable region, and type of stability."

We assess several of the important health and environmental risks associated with a reference geothermal industry that produces 21,000 MWe for 30 y (equivalent to 20 x 10{sup 18} J). The analyses of health effects focus on the risks associated with exposure to hydrogen sulfide, particulate sulfate, benzene, mercury, and radon in air and arsenic in food. Results indicate that emissions of hydrogen sulfide are likely to cause odor-related problems in 29 of 51 geothermal resources areas, assuming that no pollution controls are employed. Our best estimates and ranges of uncertainty for the health risks of chronic population exposures to atmospheric pollutants are as follows (risks expressed per 10{sup 18} J of electricity): particulate sulfate, 44 premature deaths (uncertainty range of 0 to 360); benzene, 0.15 leukemias (range of 0 to 0.51); elemental mercury, 14 muscle tremors (range of 0 to 39); and radon, 0.68 lung cancers (range of 0 to 1.8). The ultimate risk of fatal skin cancers as the result of the transfer of waste arsenic to the general population over geologic time ({approx} 100,000 y) was calculated as 41 per 10{sup 18} J. We based our estimates of occupational health effects on rates of accidental deaths together …

The final project period was devoted to investigating the binary mixture pyrolysis of polypropylene and polystyrene. Their interactions were assessed in order to provide a baseline for experiments with multicomponent mixtures of polymers with coal. Pyrolysis of polypropylene, polystyrene and their binary mixture was investigated at temperatures of 350 C and 420 C with reaction times from 1 to 180 minutes. Two different loadings, 10 mg and 20 mg, were studied for neat polypropylene and polystyrene to assess the effect of total pressure on product yields and selectivities. For neat pyrolysis of polypropylene, total conversion was much higher at 420 C, and no significant effect of loading on the total conversion was observed. Four classes of products, alkanes, alkenes, dienes, and aromatic compounds, were observed, and their distribution was explained by a typical free radical mechanism. For neat polystyrene pyrolysis, conversion reached approximately 75% at 350 C, while at 420 C the conversion reached a maximum around 90% at 10 minutes and decreased at longer times because of condensation reactions. The selectivities to major products were slightly different for the two different loadings due to the effect of total reaction pressure on secondary reactions. For binary mixture pyrolysis, the overall …

None

The hydrogen contents of several types of fabricated uranium have been determined by a vacuum method and expressed in terms of ccH2/ccU. The data indicate that alpha-rolled metal contains about 0.25 ccH2(STP)/ccU whereas beta heat-treated uranium yielded values between 0.30 and 0.37 cc per cc. Restricted efforts were made to determine where in the heat treatment the 5 to 10 cc of hydrogen per slug were taken up. It appears that no one operation is wholly responsible for this additional gas, although reactions between beta heat treated surfaces containing microscopic defects, and nitric acid may possibly play a large role. In general it may be said that slug produced by powder metallurgical techniques contain less hydrogen than pieces produced by rolling and heat treatment.

This volume is a collection of papers addressing the theme of potential impacts of climatic change. Papers are entitled Integrated Assessments of the Impacts of Climatic Change on Natural Resources: An Introductory Editorial; Framework for Integrated Assessments of Global Warming Impacts; Modeling Land Use and Cover as Part of Global Environmental Change; Assessing Impacts of Climatic Change on Forests: The State of Biological Modeling; Integrating Climatic Change and Forests: Economic and Ecological Assessments; Environmental Change in Grasslands: Assessment using Models; Assessing the Socio-economic Impacts of Climatic Change on Grazinglands; Modeling the Effects of Climatic Change on Water Resources- A Review; Assessing the Socioeconomic Consequences of Climate Change on Water Resources; and Conclusions, Remaining Issues, and Next Steps.

Studies were initiated at the Hanford Site to evaluate the process controlling the transport of fluids in the vadose zone and to develop a reliable database upon which vadose-zone transport models can be calibrated. These models are needed to evaluate contaminant migration through the vadose zone to underlying groundwaters at Hanford. A study site that had previously been extensively characterized using geophysical monitoring techniques was selected in the 200 E Area. Techniques used previously included neutron probe for water content, spectral gamma logging for radionuclide tracers, and gamma scattering for wet bulk density. Building on the characterization efforts of the past 20 years, the site was instrumented to facilitate the comparison of nine vadose-zone characterization methods: advanced tensiometers, neutron probe, electrical resistance tomography (ERT), high-resolution resistivity (HRR), electromagnetic induction imaging (EMI), cross-borehole radar (XBR), and cross-borehole seismic (XBS). Soil coring was used to obtain soil samples for analyzing ionic and isotopic tracers.

None