We have investigated the role of an isomeric state and its coupling to the ground state (g.s.) via photons and neutron inelastic scattering in a stellar environment by making detailed photonuclear and neutron cross-section calculations for /sup 176/Lu and /sup 210/Bi. In the case of /sup 176/Lu, the g.s. would function as an excellent galactic slow- (s-) process chronometer were it not for the 3.7-h isomer at 123 keV. Our calculations predicted much larger photon cross sections for production of the isomer, as well as a lower threshold, than had been assumed based on earlier measurements. These two factors combine to indicate that an enormous correction, a factor of 10/sup 7/, must be applied to shorten the current estimate of the half-life against photoexcitation of /sup 176/Lu as a function of temperature. This severely limits the use of /sup 176/Lu as a stellar chronometer and indicates a significantly lower temperature at which the two states reach thermal equilibrium. For /sup 210/Bi, our preliminary calculations of the production and destruction of the 3 /times/ 10/sup 6/ y isomeric state by neutrons and photons suggest that the /sup 210/Bi isomer may not be destroyed by photons as rapidly as assumed in certain …

We have calculated a number of neutron- and photon-induced reactions for the actinide nuclei /sup 232/Th, /sup 238/U, and /sup 237/Np. By fitting average resonance capture (ARC) measurements and total neutron capture data, we deduced absolute dipole strength functions for /sup 233/Th and /sup 239/U. We have found that the M1/E1 ratio is the same as in the /sup 176/Lu case, but the total transition strength was larger by about 27%. 17 refs., 4 figs., 1 tab.

This work is primarily concerned with the calculation of neutron capture cross sections and capture gamma-ray spectra, in the framework of the Hauser-Feshbach statistical model and for neutrons from the resonance region up to several MeV. An argument is made that, for applied purposes such as constructing evaluated cross-section libraries, nonstatistical capture mechanisms may be completely neglected at low energies and adequately approximated at high energies in a simple way. The use of gamma-ray strength functions to obtain radiation widths is emphasized. Using the reaction /sup 89/Y + n as an example, the problems encountered in trying to construct a case that could be run equivalently on two different nuclear reaction codes are illustrated, and the effects produced by certain parameter variations are discussed.

Plutonium fueled radioisotopic heat sources find space, terrestrial, and undersea applications to generate electrical power. Such systems under postulated accident conditions could release radioactivity into the environment resulting in risks to the general population in the form of radiological doses and associated health effects. The evaluation of the radiological impact of postulated scenarios involving releases of activity into the environment includes identification of postulated accident release modes, including the probability of release and the release location; source term definition, including the activity of each radionuclide released and the corresponding chemical form and particle size distribution; analysis of the environmental behavior of the released radioactivity to determine the concentrations in environmental media (air, soil, and water) as a function of time; and analysis of the interaction between the environmental concentrations and man, leading to ingestion, inhalation, and external doses through each environmental exposure pathway. 443 refs., 2 figs., 4 tabs.

The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of …

The present TENSOR code is a descendant of a code originally conceived by Maenchen and Sack and later adapted by Cherry. Originally, the code was a two-dimensional Lagrangian explicit finite difference code which solved the equations of continuum mechanics. Since then, implicit and arbitrary Lagrange-Euler (ALE) algorithms have been added. The code has been used principally to solve problems involving the propagation of stress waves through earth materials, and considerable development of rock and soil constitutive relations has been done. The code has been applied extensively to the containment of underground nuclear tests, nuclear and high explosive surface and subsurface cratering, and energy and resource recovery. TENSOR is supported by a substantial array of ancillary routines. The initial conditions are set up by a generator code TENGEN. ZON is a multipurpose code which can be used for zoning, rezoning, overlaying, and linking from other codes. Linking from some codes is facilitated by another code RADTEN. TENPLT is a fixed time graphics code which provides a wide variety of plotting options and output devices, and which is capable of producing computer movies by postprocessing problem dumps. Time history graphics are provided by the TIMPLT code from temporal dumps produced during production …

Supporting data are presented for the 1982 low-temperature geothermal resource assessment of the United States. Data are presented for 2072 geothermal sites which are representative of 1168 low-temperature geothermal systems identified in 26 States. The low-temperature geothermal systems consist of 978 isolated hydrothermal-convection systems, 148 delineated-area hydrothermal-convection systems, and 42 delineated-area conduction-dominated systems. The basic data and estimates of reservoir conditions are presented for each geothermal system, and energy estimates are given for the accessible resource base, resource, and beneficial heat for each isolated system.

A tracer test was carried out in a geothermal doublet system to study the injection behavior of a developed reservoir known to be fractured. The doublet produces about 320 gpm of 160 F water that is used for space heating and then injected; the wells are spaced 250 ft apart. Tracer breakthrough was observed in 2 hours and 45 minutes in the production well, indicating fracture flow. However, the tracer concentrations were low and indicated porous media flow; the tracers mixed with a reservoir volume much larger than a fracture.

This document deals with the procurements planned for the construction of an Atomic Vapor Laser Isotope Separation (AVLIS) production plant. Several large-scale AVLIS facilities have already been built and tested; a full-scale engineering demonstration facility is currently under construction. The experience gained from these projects provides the procurement basis for the production plant construction and operation. In this document, the status of the AVLIS process procurement is presented from two viewpoints. The AVLIS Production Plant Work Breakdown Structure is referenced at the level of the items to be procured. The availability of suppliers for the items at this level is discussed. In addition, the work that will result from the AVLIS enrichment plant project is broken down by general procurement categories (construction, mechanical equipment, etc.) and the current AVLIS suppliers are listed according to these categories. A large number of companies in all categories are currently providing AVLIS equipment for the Full-Scale Demonstration Facility in Livermore, California. These companies form an existing and expanding supplier network for the AVLIS program. Finally, this document examines the relationship between the AVLIS construction project/operational facility and established commercial suppliers. The goal is to utilize existing industrial capability to meet the needs of the …

First part of an annual report of the Texas Railroad Commission's Oil and Gas Division providing background on the industry and the agency's activities, information related to the production of oil and gas, and data regarding production by field.

Annual report of the Texas Railroad Commission's Oil and Gas Division providing background on the industry and the agency's activities, information related to the production of oil and gas, and data regarding production by field.

Salient features of technical progress for the first quarter are the following: (I) computer-assisted literature searches have been completed for several strategies designed to cover different aspects of the model development and evaluation program. Some strategy refinement and additional searches are required. Ultimately a comprehensive bibliography will have been compiled and evaluated; (II) basic mathematical components that are sufficient for the development of a first numerical model for water and methane flows to coal mines have been identified. This initial set of components is a basis for the collection and analysis of refinements to provide more realistic accounts of the complex factors affecting coal-bed methane during mining and degasification; (III) a set of basic partial differential equations for flow of water and gas in a horizontal, homogeneous coal seam has been formulated in terms of pressure, pore saturation, and adsorbed gas variables and presented in normalized form for numerical solution. Equation sets corresponding to alternative choices of dependent variables will be formulated and compared with this initial set and (IV) computer subroutines have been modified and assembled to implement one-dimensional, nonsteady, two-phase flow models. These programs implement numerical, finite-difference, method-of-lines algorithms in a format that facilitates substitution of mathematical components …

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

Newsletter of the Texas Bureau of Disease Control and Epidemiology discussing the news, activities, and events of the organization and other information related to health in Texas.

Potential enviornmental, health, and safety (E,H and S) concerns associated with all phases of the photovoltaic (PV) energy system life cycle are identified and assessed. E,H and S concerns affecting the achievement of National PV Program goals or the viability of specific PV technologies are emphasized. The report is limited to near-term manufacturing process alternatives for crystalline silicon PV materials, addresses flat-plate and concentrator collector designs, and reviews system deployment in grid-connected, roof-mounted, residential and ground-mounted central-station applications. The PV life-cycle phases examined include silicon refinement and manufacture of PV collectors, system deployment, and decommissioning. The primary E,H and S concerns that arise during collector fabrication are associated with occupational exposure to materials of undetermined toxicity or to materials that are known to be hazardous, but for which process control technology may be inadequate. Stricter exposure standards are anticipated for some materials and may indicate a need for further control technology development. Minimizing electric shock hazards is a significant concern during system construction, operation and maintenance, and decommissioning.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.

A weekly publication, the Texas Register serves as the journal of state agency rulemaking for Texas. Information published in the Texas Register includes proposed, adopted, withdrawn and emergency rule actions, notices of state agency review of agency rules, governor's appointments, attorney general opinions, and miscellaneous documents such as requests for proposals. After adoption, these rulemaking actions are codified into the Texas Administrative Code.