N/A

None

This report contains geologic, geochemical, and physical characterization data collected on sediment recovered from boreholes C4104 and C4105 in the T Tank Farm, and 299-W-11-39 installed northeast of the T Tank Farm. The measurements on sediments from borehole C4104 are compared to a nearby borehole 299-W10-196 placed through the plume from the 1973 T-106 tank leak. This report also presents the data in the context of sediment types, the vertical extent of contamination, the migration potential of the contaminants, and the likely source of the contamination in the vadose zone and groundwater below the T Tank Farm. Sediment samples were characterized for: moisture content, gamma-emission radionuclides, one-to-one water extracts (which provide soil pH, electrical conductivity, cation, trace metal, radionuclide and anion data), total carbon and inorganic carbon content, and 8 M nitric acid extracts (which provide a measure of the total leachable sediment content of contaminants). Overall, our analyses showed that common ion exchange is a key mechanism that influences the distribution of contaminants within that portion of the vadose zone affected by tank liquor. We observed slight elevated pH values in samples from borehole C4104. The sediments from the three boreholes, C4104, C4105, and 299-W10-196 do show that sodium-, …

Pacific Northwest National Laboratory performed detailed analyses on vadose zone sediments from within Waste Management Area T-TX-TY. This report contains all the geologic, geochemical, and selected physical characterization data collected on vadose zone sediment recovered from three probe holes (C3830, C3831, and C3832) in the TX Tank Farm, and from borehole 299-W-10-27. Sediments from borehole 299-W-10-27 are considered to be uncontaminated sediments that can be compared with contaminated sediments. This report also presents our interpretation of the sediment lithologies, the vertical extent of contamination, the migration potential of the contaminants, and the likely source of the contamination in the vadose zone and groundwater below the TX Tank Farm. Sediment from the probe holes was analyzed for: moisture, radionuclide and carbon contents;, one-to-one water extracts (soil pH, electrical conductivity, cation, trace metal, and anion data), and 8 M nitric acid extracts. Overall, our analyses showed that common ion exchange is a key mechanism that influences the distribution of contaminants within that portion of the vadose zone affected by tank liquor. We did not observe significant indications of caustic alteration of the sediment mineralogy or porosity, or significant zones of slightly elevated pH values in the probe holes. The sediments do show …

This dissertation describes a direct measurement of the W boson total decay width, {Lambda}{sub W}, using the D0 detector at the Fermilab Tevatron Collider. The measurement uses an integrated luminosity of 177.3 pb{sup -1} data, collected during the 2002-2003 run. The width is determined from the shape of the transverse mass distribution, M{sub T}, by fitting the data in the tail region 100 < M{sub T} < 200 GeV. The result if {Lambda}{sub W} = 2.011 {+-} 0.093(stat) {+-} 0.107(syst) GeV.

This dissertation describes two different projects from two different experiments. We have performed a search for CPT violation in neutral charm meson oscillations using data from the FOCUS Experiment. While flavor mixing in the charm sector is predicted to be small in the Standard Model, it is still possible to investigate CPT violation through a study of the proper time dependence of a CPT asymmetry in right-sign decay rates for D{sup 0} {yields} K{sup -} {pi}{sup +} and {bar D}{sup 0} {yields} K{sup +}{pi}{sup -}. This asymmetry is related to the CPT violating complex parameter {xi} and the mixing parameters x and y: A{sub CPT} {infinity} Re{xi}y - Im{xi}x. We determine a 95% confidence level limit of -0.0068 < Re{xi}y - Im{xi}x < 0.0234. Within the framework of the Standard Model Extension incorporating general CPT violation, we also find 95% confidence level limits for the expressions involving coefficients of Lorentz violation of (-2.8 < N(x,y,{delta}))({Delta}a{sub 0} + 0.6 {Delta}a{sub Z} < 4.8) x 10{sup -16} GeV, (-7.0 < N(x,y,{delta}){Delta}a{sub x} < 3.8) x 10{sup -16} GeV, and (-7.0 < N(x,y,{delta}){Delta}a{sub y} < 3.8) x 10{sup -16} GeV, where N(x,y,{delta}) is a normalization factor that incorporates mixing parameters x, y and …

Heating oil, as its name implies, is intended for end use heating consumption as its primary application. But its identity in reference name and actual chemical properties may vary based on a number of factors. By name, heating oil is sometimes referred to as gas oil, diesel, No. 2 distillate (middle distillate), or light heating oil. Kerosene, also used as a burner fuel, is a No. 1 distillate. Due to the higher heat content and competitive price in most markets, No. 2 heating oil is primarily used in modern, pressure-atomized burners. Using No. 1 oil for heating has the advantages of better cold-flow properties, lower emissions, and better storage properties. Because it is not nearly as abundant in supply, it is often markedly more expensive than No. 2 heating oil. Given the advanced, low-firing rate burners in use today, the objective is for the fuel to be compatible and achieve combustion performance at the highest achievable efficiency of the heating systems--with minimal service requirements. Among the Oil heat industry's top priorities are improving reliability and reducing service costs associated with fuel performance. Poor fuel quality, fuel degradation, and contamination can cause burner shut-downs resulting in ''no-heat'' calls. Many of these …

Current grid development projects are being designed such that they require end users to be authenticated under the auspices of a ''recognized'' organization, called a Virtual Organization (VO). A VO must establish resource-usage agreements with grid resource providers. The VO is responsible for authorizing its members for grid computing privileges. The individual sites and resources typically enforce additional layers of authorization. The VOX project developed at Fermilab is an extension of VOMS, developed jointly for DataTAG by INFN and for DataGrid by CERN. The VOX project provides set of services that facilitate grid users registration with a VO, administration of VO members, as well as control access of grid users to a particular site. The current state of deployment and future steps to improve the prototype and implement some new features will be discussed.

N/A

Weekly newspaper from Clifton, Texas that includes local, state, and national news along with advertising.

A major goal of industry and the U.S. Department of Energy (DOE) fossil energy program is to increase gas reserves in tight-gas reservoirs. Infill drilling and hydraulic fracture stimulation in these reservoirs are important reservoir management strategies to increase production and reserves. Phase II of this DOE/cooperative industry project focused on optimization of infill drilling and evaluation of hydraulic fracturing in naturally-fractured tight-gas reservoirs. The cooperative project involved multidisciplinary reservoir characterization and simulation studies to determine infill well potential in the Mesaverde and Dakota sandstone formations at selected areas in the San Juan Basin of northwestern New Mexico. This work used the methodology and approach developed in Phase I. Integrated reservoir description and hydraulic fracture treatment analyses were also conducted in the Pecos Slope Abo tight-gas reservoir in southeastern New Mexico and the Lewis Shale in the San Juan Basin. This study has demonstrated a methodology to (1) describe reservoir heterogeneities and natural fracture systems, (2) determine reservoir permeability and permeability anisotropy, (3) define the elliptical drainage area and recoverable gas for existing wells, (4) determine the optimal location and number of new in-fill wells to maximize economic recovery, (5) forecast the increase in total cumulative gas production from infill …

Modern comparative genomics has been established, in part, by the sequencing and annotation of a broad range of microbial species. To gain further insights, new sequencing efforts are now dealing with the variety of strains or isolates that gives a species definition and range; however, this number vastly outstrips our ability to sequence them. Given the availability of a large number of microbial species, new whole genome approaches must be developed to fully leverage this information at the level of strain diversity that maximize discovery. Here, we describe how optical mapping, a single-molecule system, was used to identify and annotate chromosomal alterations between bacterial strains represented by several species. Since whole-genome optical maps are ordered restriction maps, sequenced strains of Shigella flexneri serotype 2a (2457T and 301), Yersinia pestis (CO 92 and KIM), and Escherichia coli were aligned as maps to identify regions of homology and to further characterize them as possible insertions, deletions, inversions, or translocations. Importantly, an unsequenced Shigella flexneri strain (serotype Y strain AMC[328Y]) was optically mapped and aligned with two sequenced ones to reveal one novel locus implicated in serotype conversion and several other loci containing insertion sequence elements or phage-related gene insertions. Our results suggest …

None

One of the main objectives of this demonstration project is to test surface geochemical techniques for detecting trace amounts of light hydrocarbons in pore gases as a means of reducing risk in hydrocarbon exploration and production. As part of the project, several field demonstrations were undertaken to assess the validity and usefulness of the microbial surface geochemical technique. The important observations from each of these field demonstrations are briefly reviewed in this annual report. These demonstrations have been successful in identifying the presence or lack of hydrocarbons in the subsurface and can be summarized as follows: (1) The surface geochemistry data showed a fair-to-good microbial anomaly that may indicate the presence of a fault or stratigraphic facies change across the drilling path of the State Springdale & O'Driscoll No.16-16 horizontal demonstration well in Manistee County, Michigan. The well was put on production in December 2003. To date, the well is flowing nearly 100 barrels of liquid hydrocarbons per day plus gas, which is a good well in Michigan. Reserves have not been established yet. Two successful follow-up horizontal wells have also been drilled in the Springdale area. Additional geochemistry data will be collected in the Springdale area in 2004. (2) …

I'd like to welcome you to the Agent 2004 conference. As most of you are aware, this conference is the fifth in a series of meetings that began in 1999. A conference followed the next year in 2000. The 2001 conference was skipped because of some conflicts with other conferences, and the conferences have proceeded annually since then. We have the proceedings of the previous conferences available here on CDs. One CD has the proceedings from 1999, 2000, and 2002; the other contains last year's proceedings. The purpose of these conferences is to advance the state of the computational social sciences and to integrate the social sciences with the decision sciences and something that is traditionally known as the management sciences. Those of you in the operations/research area are familiar with the traditional school of modeling simulation that emerged from that scientific area. This conference will bring together a different group of people to talk about the topic of agent-based theories and simulations. This fifth agent conference is one of a group of conferences held annually around the country. Most of you are probably aware of the CASOS Conference held at Carnegie Mellon University, usually in July. UCLA holds the …

Vinton salt dome is located in Southwestern Louisiana, in Calcasieu Parish. Tectonically, the piercement dome is within the salt dome minibasin province. The field has been in production since 1901, with most of the production coming from Miocene and Oligocene sands. The goal of our project was to develop and calibrate new processing and interpretation technology to fully exploit the information available from a simultaneous 3-D surface seismic survey and 3-C, 3-D vertical seismic profile (VSP) survey over the dome. More specifically the goal was to better image salt dome flanks and small, reservoir-compartmentalizing faults. This new technology has application to mature salt-related fields across the Gulf Coast. The primary focus of our effort was to develop, apply, and assess the limitations of new 3-C, 3-D wavefield separation and imaging technology that could be used to image aliased, limited-aperture, vector VSP data. Through 2-D and 3-D full elastic modeling, we verified that salt flank reflections exist in the horizontally-traveling portion of the wavefield rather than up- and down-going portions of the wavefield, thereby explaining why many commercial VSP processing flow failed. Since the P-wave reflections from the salt flank are measured primarily on the horizontal components while P-wave reflections from …

The objective of the research described in this report is the development and application of a methodology for comprehensively assessing the hydrogeologic uncertainties involved in dose assessment, including uncertainties associated with conceptual models, parameters, and scenarios. This report describes and applies a statistical method to quantitatively estimate the combined uncertainty in model predictions arising from conceptual model and parameter uncertainties. The method relies on model averaging to combine the predictions of a set of alternative models. Implementation is driven by the available data. When there is minimal site-specific data the method can be carried out with prior parameter estimates based on generic data and subjective prior model probabilities. For sites with observations of system behavior (and optionally data characterizing model parameters), the method uses model calibration to update the prior parameter estimates and model probabilities based on the correspondence between model predictions and site observations. The set of model alternatives can contain both simplified and complex models, with the requirement that all models be based on the same set of data. The method was applied to the geostatistical modeling of air permeability at a fractured rock site. Seven alternative variogram models of log air permeability were considered to represent data …

The purpose of this work is to characterize groundwater flow and contaminant transport at the Shoal underground nuclear test through numerical modeling using site-specific hydrologic data. The ultimate objective is the development of a contaminant boundary, a model-predicted perimeter defining the extent of radionuclide-contaminated groundwater from the underground test throughout 1,000 years at a prescribed level of confidence. This boundary will be developed using the numerical models described here, after they are approved for that purpose by DOE and NDEP.

Groundwater flow and radionuclide transport at the Shoal underground nuclear test are characterized using three-dimensional numerical models, based on site-specific hydrologic data. The objective of this modeling is to provide the flow and transport models needed to develop a contaminant boundary defining the extent of radionuclide-contaminated groundwater at the site throughout 1,000 years at a prescribed level of confidence. This boundary will then be used to manage the Project Shoal Area for the protection of the public and the environment.

This document is intended to contain a detailed description of the mathematical formulation of Xyce, a massively parallel SPICE-style circuit simulator developed at Sandia National Laboratories. The target audience of this document are people in the role of 'service provider'. An example of such a person would be a linear solver expert who is spending a small fraction of his time developing solver algorithms for Xyce. Such a person probably is not an expert in circuit simulation, and would benefit from an description of the equations solved by Xyce. In this document, modified nodal analysis (MNA) is described in detail, with a number of examples. Issues that are unique to circuit simulation, such as voltage limiting, are also described in detail.

Using data from the FOCUS (E831) experiment at Fermilab, the authors present a new measurement for the Cabibbo-suppressed decay mode D{sup 0} {yields} K{sup +}K{sup -}{pi}{sup +}{pi}{sup -}. They measure: {Lambda}(D{sup 0} {yields} K{sup +}K{sup -}{pi}{sup +}{pi}{sup -})/{Lambda}(D{sup 0} {yields} K{sup -}{pi}{sup -}{pi}{sup +}{pi}{sup +}) = 0.0295 {+-} 0.0011 {+-} 0.0008. An amplitude analysis has been performed in order to determine the resonant substructure of this decay mode. The dominant components are the decays D{sup 0} {yields} K{sub 1}(1270){sup +} K{sup -}, D{sup 0} {yields} K{sub 1}(1400){sup +}K{sup -} and D{sup 0} {yields} {rho}(770){sup 0}{phi}(1020).

The authors present an analysis of the decay D{sup 0} {yields} K{sup +}{pi}{sup -} based on FOCUS data. From a sample of 234 signal events, they find a branching ratio of {Lambda}(D{sup 0} {yields} K{sup +}{pi}{sup -})/{Lambda}(D{sup 0} {yields} K{sup -}{pi}{sup +}) = (0.429{sub -0.061}{sup +0-.063} {+-} 0.027)% under the assumptions of no mixing and no CP violation. Allowing for CP violation, the find a branching ratio of (0.435{sub -0.061}{sup +0.063} {+-} 0.028)% and a CP asymmetry of 0.178{sub -0.141}{sup +0.144} {+-} 0.041. The branching ratio for the case of mixing with no CP violation is (0.381{sub -0.163}{sup +0.167} {+-} 0.092)%. They also present limits on charm mixing.

This manual describes the use of the Xyce Parallel Electronic Simulator. Xyce has been designed as a SPICE-compatible, high-performance analog circuit simulator capable of simulating electrical circuits at a variety of abstraction levels. Primarily, Xyce has been written to support the simulation needs of the Sandia National Laboratories electrical designers. This development has focused on improving capability the current state-of-the-art in the following areas: {sm_bullet} Capability to solve extremely large circuit problems by supporting large-scale parallel computing platforms (up to thousands of processors). Note that this includes support for most popular parallel and serial computers. {sm_bullet} Improved performance for all numerical kernels (e.g., time integrator, nonlinear and linear solvers) through state-of-the-art algorithms and novel techniques. {sm_bullet} Device models which are specifically tailored to meet Sandia's needs, including many radiation-aware devices. {sm_bullet} A client-server or multi-tiered operating model wherein the numerical kernel can operate independently of the graphical user interface (GUI). {sm_bullet} Object-oriented code design and implementation using modern coding practices that ensure that the Xyce Parallel Electronic Simulator will be maintainable and extensible far into the future. Xyce is a parallel code in the most general sense of the phrase - a message passing of computing platforms. These include serial, …

This document is a reference guide to the Xyce Parallel Electronic Simulator, and is a companion document to the Xyce Users' Guide. The focus of this document is (to the extent possible) exhaustively list device parameters, solver options, parser options, and other usage details of Xyce. This document is not intended to be a tutorial. Users who are new to circuit simulation are better served by the Xyce Users' Guide.