Scaling studies for a SITEX negative ion source to produce 200-keV, 10-A, long pulse D/sup -/ beams are under way at Oak Ridge National Laboratory (ORNL). Designs have been restricted to the use of established techniques and reasonably well-demonstrated scaling. The results show that the 1-A SITEX source can be directly scaled to produce 200-keV, 10-A long pulse ion beams with a source power efficiency of less than or equal to 5 kW of total plasma generator power per ampere of D/sup -/ beam generated. Extracted electron-to-D/sup -/ ratios should be less than or equal to 0.06, with all extracted electrons recovered at less than or equal to 10% of the first gap potential energy difference. The close-coupled accelerating structure will be 5 cm long and have five electrodes with 21 slits each, with a 50-kV/cm field in each gap.

Conceptual and preliminary engineering design for the National RF Test Facility at Oak Ridge National Laboratory (ORNL) has been completed. The facility will comprise a single mirror configuration embodying two superconducting development coils from the ELMO Bumpy Torus Proof-of-Principle (EBT-P) program on either side of a cavity designed for full-scale antenna testing. The coils are capable of generating a 1.2-T field at the axial midpoint between the coils separated by 1.0 m. The vacuum vessel will be a stainless steel, water-cooled structure having an 85-cm-radius central cavity. The facility will have the use of a number of continuous wave (cw), radio-frequency (rf) sources at levels including 600 kW at 80 MHz and 100 kW at 28 GHz. Several plasma sources will provide a wide range of plasma environments, including densities as high as approx. 5 x 10/sup 13/ cm/sup -3/ and temperatures on the order of approx. 10 eV. Furthermore, a wide range of diagnostics will be available to the experimenter for accurate appraisal of rf testing.

Additions and modifications to the National RF Test Facility design have been made that (1) focus its use for technology development for future large systems in the ion cyclotron range of frequencies (ICRF), (2) expand its applicability to technology development in the electron cyclotron range of frequencies (ECRF) at 60 GHz, (3) provide a facility for ELMO Bumpy Torus (EBT) 60-GHz ring physics studies, and (4) permit engineering studies of steady-state plasma systems, including superconducting magnet performance, vacuum vessel heat flux removal, and microwave protection. The facility will continue to function as a test bed for generic technology developments for ICRF and the lower hybrid range of frequencies (LHRF). The upgraded facility is also suitable for mirror halo physics experiments.

An emittance measurement employing two techniques are being made on SITEX. To this end, a 2-D calculation was performed to design the accelerator in order to reduce electric field abberations. The calculated normalized emittance is 6 x 10/sup -4/ IIcm mrad for an angular divergence theta/sub RMS/ approx. = 0.28/sup 0/. Status of the experimental findings are presented and a comparison made to the calculated value which will yield the ion sputter energy.

Self regulated power oscillation experiments with a variety of initial conditions have been performed with the ORNL Health Physics Research Reactor (HPRR) by undergraduate nuclear engineering students from The University of Tennessee for several years. These experiments demonstrate the coupling between reactor kinetics and heat transfer and show how the temperature coefficient of reactivity affects reactor behavior. A model that consists of several coupled first order nonlinear differential equations is used to calculate the temperature of the core center and surface and power as a function of time which are compared with the experimental data; also, the model is also used to study the effects of various model parameters and initial conditions on the amplitude, frequency and damping of the power and temperature oscillations. A previous paper presented some limited experimental results and demonstrated the correspondence between a simple point model and the experimental data. This paper presents the results of experiments for: (1) the initial power fixed at 9 kW with central core temperatures of 300/sup 0/F and 500/sup 0/F, annd (2) the initial central core temperature fixed at 500/sup 0/F with initial powers of 6 and 8 kW.

A detailed geochemical investigation of 27 waters of the Lucero uplift, central New Mexico, was performed to determine if the fluids originate from a high-temperature geothermal system along the Rio Grande rift. Two types of mineralized water issue from the Lucero region: a relatively saline (high-Cl, high-SO/sub 4/) type and a relatively dilute (low-Cl, high-SO/sub 4/) type. Emergence temperatures of both types range from 12 to 26/sup 0/C. Chemical data and thermodynamic and geothermometer calculations all indicate that both water types are in equilibrium with carbonate and evaporite minerals found in local Colorado Plateau rocks at surface temperatures or slightly higher. Stable isotope data do not indicate high-temperature rock-water interaction. Although evidence is seen for mixing between mineralized waters and dilute surface waters, no evidence for mixing of a deep hot fluid and surface waters is seen. Dilute mineral waters, which issue from a large area of Chinle Formation on the west side of the Lucero uplift, may be useful for low-temperature geothermal applications with appropriate design of equipment. Saline mineral waters, which leak from a zone of faulted and folded rocks along the Comanche fault zone, do not appear to have much, if any, geothermal potential due to their …

A quasi-steady-state ion source has been developed for neutral beam injection applications. It is of the duoPIGatron type designed for delivering 50 A of hydrogen ions at 80 keV for 30-s-long pulses. Ion beams of 40 A at 75 keV were extracted for pulse lengths up to 30 s, maintaining excellent optical quality in the beam for the entire pulse duration. The design features and operational characteristics of the ion source are elaborated.

The Ninth Underground Coal Gasification Symposium was held August 7 to 10, 1983 at the Indian Lakes Resort and Conference Center in Bloomingdale, Illinois. Over one-hundred attendees from industry, academia, National Laboratories, State Government, and the US Government participated in the exchange of ideas, results and future research plans. Representatives from six countries including France, Belgium, United Kingdom, The Netherlands, West Germany, and Brazil also participated by presenting papers. Fifty papers were presented and discussed in four formal sessions and two informal poster sessions. The presentations described current and future field testing plans, interpretation of field test data, environmental research, laboratory studies, modeling, and economics. All papers were processed for inclusion in the Energy Data Base.

Scope of the tasks being performed by Los Alamos will be identified. Emphasis will be placed upon the geotechnical work. Important geotechnical properties of a low-level waste disposal site include hydraulic conductivity consolidation, and shear strength of the applicable medium. The hydraulic conductivity of crushed Bandelier tuff has been assessed using the instantaneous profile method. The best fit of hydraulic conductivity as a function of water content was found to be a power function. The coefficient of consolidation was difficult to measure because of the relatively high hydraulic conductivity. The repose angle for crushed tuff is higher than the normally expected range. This is probably because of a higher than average angularity and surface roughness. The high coefficient of consolidation and high internal friction angle make finely crushed tuff a material with ideal mechanical characteristics. The drawback is that a high coefficient of consolidation is linked to a high hydraulic conductivity.

None

This report on stratigraphic correlations from drillhole and shaft data along a generally north-south section across the potential extent of underground excavations of the Waste Isolation Pilot Plant (WIPP) facility was prepared as part of the Site Validation Field Program Plan. The results provide (1) input for the report entitled ''Results of Site Validation Experiments,'' (2) input for other WIPP-related investigations, including the Design Validation Program, and (3) a framework for further underground activities at WIPP. In general, this correlation study confirmed previous findings, including: relatively high consistency of thickness and lateral continuity of all beds within the Salado Formation, especially in the host rock interval; gentle, generally south and southeastward dips/slopes of the host rock interval strata; close correspondence between stratigraphic data obtained from the present underground excavations and data derived from the previous investigative drillholes and shafts; and depositional origin of the undulations on the top of Marker Bed (MB) 139 and relatively small variation in its thickness (1.2 to 4.1 feet).

It is demonstrated how the computer, used in a heuristic mode, has greatly augmented our understanding of the mathematics of nonlinear dynamical processes. Examples are given of recent work in soliton mathematics (waves) and contour dynamics: a boundary integral evolutionary method that is applicable to a wide class of 2D flows. The role of good graphics in enhancing the discovery, retention, and communication of new mathematical properties of equations is illustrated.

This text is a collection of solutions to a variety of heat conduction problems found in numerous publications, such as textbooks, handbooks, journals, reports, etc. Its purpose is to assemble these solutions into one source that can facilitate the search for a particular problem solution. Generally, it is intended to be a handbook on the subject of heat conduction. There are twelve sections of solutions which correspond with the class of problems found in each. Geometry, state, boundary conditions, and other categories are used to classify the problems. Each problem is concisely described by geometry and condition statements, and many times a descriptive sketch is also included. The introduction presents a synopsis on the theory, differential equations, and boundary conditions for conduction heat transfer. Some discussion is given on the use and interpretation of solutions. Supplementary data such as mathematical functions, convection correlations, and thermal properties are included for aiding the user in computing numerical values from the solutions. 155 figs., 92 refs., 9 tabs.

This bibliography contains 725 references to articles in journals, books, and reports published in the subject area of biomedical and environmental sciences during 1982. There are 553 references to articles published in journals and books and 172 references to reports. The citations appear once ordered by the first author's division or by the performing division. Staff members in the Biomedical and Environmental Sciences divisions have other publications not included in this bibliography; for example, theses, book reviews, abstracts published in journals or symposia proceedings, pending journal publications and reports such as monthly, bimonthly, and quarterly progress reports, contractor reports, and reports for internal distribution. This document is sorted by the division, and then alphabetically by author. The sorting by divisions separates the references by subject area in a simple way. The divisions are represented alphabetically. Indexes are provided by author, title, and journal reference. Reprints of articles referenced in this bibliography can be obtained from the author or the author's division.

A report on the progress in coupled channel methods applied to ion-atom collisions is presented. A new approximation scheme for collisions with correlated atoms is described and tested.

Progress is reported in the following areas: heat extraction from hydrothermal reservoirs; radon reservoir engineering; well test analysis and bench scale experiments; field applications; workshop, seminars, and technical information; reinjection technology; and seismic monitoring of vapor/liquid interfaces. (MHR)

Negative-ion-based neutral beam systems can perform multiple functions for fusion reactors, such as heating, current drive in tokamak reactors, and establishing and maintaining potential barriers in tandem mirror reactors. Practical systems operating continuously at the 200 keV, 1 MW level can be built using present-day technology. Ion sources have been demonstrated that produce D/sup -/ beams with <5% electron content, and that operate at linear current densities that are within a factor of 2 of what conservatively designed accelerator/transport structures can handle. Concepts are in hand for transporting the negative ion beam through a neutron maze before neutralization, thus permitting a radiation-hardened beamline. With an advanced laser photoneutralizer, overall system power efficiencies of 70% should be possible. A national program is being planned to achieve the goal of application of 475 keV systems on a mirror ETR in 1994.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

Daily newspaper from Perry, Oklahoma that includes local, state, and national news along with advertising.

The purpose of this study is to develop and optimize the High Energy Gas Fracturing (HEGF) technique to produce multiple fractures around a wellbore in order to stimulate natural-gas production in Devonian shale. The HEGF technique uses a wellbore charge of a propellant tailored to produce pressure loading in the borehole that avoids crushing yet produces multiple fractures radiating from the wellbore. The multiple-fracture regime has been characterized and releated to parameters such as borehole size, pressure risetime, and surface-wave velocity. Pressure risetimes and peak pressures, measured for different propellants in boreholes to specify a propellant for a desired peak pressure and pressure risetime. Semiempirical models, using results from previous experiments, successfully relate stress, acceleration, and fracture radii in surrounding rock to peak pressure and pressure risetime. A finite-element model also has been developed which predicts fracture type and direction of fractures as a function of pressure loading, in situ stress, and material properties. A full-scale HEGF system has been developed for application in gas-well-stimulation experiments in Devonian shale. During this quarter, a proof test of the full-scale HEGF was conducted at the Nevada Test Site (NTS). The designed pressure pulse of 0.5 ms risetime was achieved, and the tamp …

The GEOTHERM sample file contains 119 records for the central and eastern United States. The records contain data on location, sample description, analysis type, collection condition, flow rates, and the chemical and physical properties of the fluid. Stable and radioisotopic data are occasionally available. 7 refs. (ACR)

This sample file contains 346 records for Oregon. The records contain data on location, sample description, analysis type, collection condition, flow rates, and chemical and physical properties of the fluid. Stable and radioactive isotope data are occasionally available. (ACR)