Primary obtectives in design of surface disposal fills for processed and raw oil shales are: (a) to insure long-term physical stability, and (b) to prevent surface runoff, surface erosion, and possible subsurface seepage from degrading the water quality of streams and ground water, it was concluded that the analysis and design of spent shale disposal fills should be based on sound geotechnical engineeering principles, considerable experience, and good judgment. An understanding of the source of variability of spent shale materials and its effect on engineering properties is a first step in developing fill design. A second important step is the assessment of long-term changes in the properties of spent shale within a disposal fill. This assessment requires consideration of possible thermal, hydrochemical, and physical interactions within the fill and between the fill and site environment. The site environment is site-specific and depends on the geological, surface and subsurface hydrological, and geotechnical characteristics of the site. The variability of spent shale materials is a direct function of variations in mineral and chemical composition of the raw shale and of the processes applied. Current technology for the design and construction of spent shale disposal fills has not been proven by experience. A …

Supporting data are presented for the 1982 low-temperature geothermal resource assessment of the United States. Data are presented for 2072 geothermal sites which are representative of 1168 low-temperature geothermal systems identified in 26 States. The low-temperature geothermal systems consist of 978 isolated hydrothermal-convection systems, 148 delineated-area hydrothermal-convection systems, and 42 delineated-area conduction-dominated systems. The basic data and estimates of reservoir conditions are presented for each geothermal system, and energy estimates are given for the accessible resource base, resource, and beneficial heat for each isolated system.

This field trip guide has been compiled from extensive field trips led at Los Alamos National Laboratory during the past six years. The original version of this guide was designed to augment a workshop on the Valles Caldera for the Continental Scientific Drilling Program (CSDP). This workshop was held at Los Alamos, New Mexico, 5-7 October 1982. More stops were added to this guide to display the volcanic and geothermal features at the Valles Caldera. The trip covers about 90 miles (one way) and takes two days to complete; however, those who wish to compress the trip into one day are advised to use the designated stops listed in the Introduction. Valles Caldera and vicinity comprise both one of the most exciting geothermal areas in the United States and one of the best preserved Quaternary caldera complexes in the world.

In the course of this contract C. K. GeoEnergy: (1) planned, organized, conducted, and reported on six DOE/Industry Forum meetings where the progress of DOE's resource development program was outlined and discussed (these six forum meetings included three meetings of the Drilling and Testing Subgroup and three meetings of the Overview Group), (2) prepared and distributed 15 newsletters, and (3) prepared three reports for DOE lease support. This final report includes summaries of each of the forum meetings as well as the three lease support meetings and the newsletter program.

In February 1981, the Utah geological and Mineral Survey (UGMS) contracted with the Department of Energy (DOE) to evaluate the geothermal potential of an area proposed for a possible Missile Experimental (MX) operations base in the Escalante Valley region of Utah. Exploration techniques employed included a temperature survey, chemical analysis of springs and wells, and temperature-depth measurements in holes of opportunity. The highest water temperatures recorded in the area, with the exceptions of a 60/sup 0/C (140/sup 0/F) geothermal exploration hole and Thermo Hot Springs (42 to 78/sup 0/C or 108 to 172/sup 0/F), were 27 and 28/sup 0/C (81 and 82/sup 0/F) at two wells located northwest of Zane, Utah.

Forward: The purpose of this report is to summarize the results obtained from a brief investigation of supercritical fluid extraction principles and applications. This study was one portion of a project funded by the U.S. Department of Energy, Office of Fossil Energy, contract nuriber DE-AI01076PR06010, in response to a preliminary proposal submitted by the authors. This report sometimes uses company trade naries to identify processes and patent holders. This usage implies no endorsement by HBS. Note also that some figures reproduced from other sources do not conform with NBS policy concerning SI units.