The GNEMRE Dendro Tool provides a previously unrealized analysis capability in the field of nuclear explosion monitoring. Dendro Tool allows analysts to quickly and easily determine the similarity between seismic events using the waveform time-series for each of the events to compute cross-correlation values. Events can then be categorized into clusters of similar events. This analysis technique can be used to characterize historical archives of seismic events in order to determine many of the unique sources that are present. In addition, the source of any new events can be quickly identified simply by comparing the new event to the historical set.

This note is written in response to a request from Phil Livdahl for corrections, and additions to a TM he is writing on Staffing Levels at Fermilab during Initial Construction Years and to a note that Hank Hinterberger is preparing on milestones. In my spare time over the past few years I have taken the original files of the Main Ring Section, my own notes from that period, and various other collections of relevant paper, and arranged them in a set of 44 large loose leaf binders in chronological order. I call this set of volumes the 'Main Ring Chronological Archives'. In response to Phil's request I have recently skimmed through these records of the period and extracted a small subset of documents which relate to the specific questions that Phil is addressing: staffing. administration, and milestones.

This document from the LLNL In Vivo measurement Facility archives provides important historical as well as current methods for the proper handling of the LLNL Torso Phantom. This document was written circa 1980 and is intended for use by in vivo measurement facilities that perform calibrations using the LLNL Torso Phantom. Proper care and use of the LLNL Torso Phantom will greatly extend the useful lifetime of the phantom. The assembly, and disassembly of the Realistic Phantom are simple tasks and are, for the most part, self evident. However, there are some considerations that will make these tasks easier and assure long life of the parts. The assembly process is presented in Figures 1 through 9 while disassembly suggestions are illustrated in Figures 10 and 11.

Studies on the formation and properties of new materials for high-energy, gas-phase lasers are described. Attention is directed mainly to systems having bound excited states but unbound ground states. An important class of such excimer/exciplex systems has a van der Waals dimer/oligomer as its ground state. This research attempts to probe the relative rates of electron pumping of excited-state manifolds and the preferentially pumped vibronic states within each manifold. Reactive quenching of emission, resonant self-absorption of laser emissions, and collision- and noncollision-induced intersystem crossing are also considered. Lists of personnel and facilities are included. 8 figures, 2 tables. (RWR)

This semiannual report summarizes the research performed from 17 April through 16 October 2004. Major portions of the research in several of the project's current eight tasks have been completed, and the results obtained are briefly presented. We have successfully developed the meteorological inputs using the best possible modeling configurations, resulting in improved representation of atmospheric processes. Ingestion of satellite-derived sea surface temperatures in conjunction with the use of our new surface data assimilation technique have resulted in largely improved meteorological inputs to drive the MAQSIP-VGR. The development of the variable-grid-resolution emissions model, SMOKE-VGR, is also largely complete. We expect to develop the final configuration of the SMOKE-VGR during the upcoming reporting period. We are in the process of acquiring the newly released emissions database and offshore emissions data sets to update our archives. The development of the MAQSIP-VGR has been completed and a test run was performed to ensure the functionality of this air quality model. During the upcoming reporting period, we expect to perform the first MAQSIP-VGR simulations over the Houston-Galveston region to study the roles of the meteorology, offshore emissions, and chemistry-transport interactions that determine the temporal and spatial evolution of ozone and its precursors.

Apartment temperature data have been collected from the archives of companies that provide energy management systems (EMS) to multifamily buildings in the Northeast U.S. The data have been analyzed from more than 100 apartments in eighteen buildings where EMS systems were already installed to quantify the degree of overheating. This research attempts to answer the question, 'What is the magnitude of apartment overheating in multifamily buildings with central hot water or steam heat?' This report provides valuable information to researchers, utility program managers and building owners interested in controlling heating energy waste and improving resident comfort. Apartment temperature data were analyzed for deviation from a 70 degrees F desired setpoint and for variation by heating system type, apartment floor level and ambient conditions. The data shows that overheating is significant in these multifamily buildings with both hot water and steam heating systems.

The Hanford Meteorological Station (HMS), operated by Pacific Northwest Laboratory, archives wind, dry bulb temperature, and soil temperature data gathered each hour from the 410-ft meteorological tower. These data include measurements of wind speed and wind direction for seven heights, eight dry bulb temperatures, and three soil temperatures. The TOWER computer code is used to archive those measurements and apply quality assurance checks to the data. The code accesses an input file, which contains the previous archive's date and hour, and an output file, which contains tower weather observations for the current month. A data entry form consisting of 25 fields is included in the program. The fields must be filled in by the user. The information entered is appended to the monthly file, which provides an archive for the tower data gathered hourly. This volume describes the implementation and operation of the TOWER computer code at the HMS.

Improved ground-imaging capabilities have enormous potential to increase energy, environmental, and economic benefits by improving exploration accuracy and reducing energy consumption during the mining cycle. Seismic tomography has been used successfully to monitor and evaluate geologic conditions ahead of a mining face. A primary limitation to existing seismic tomography, however, is the placement of sensors. The goal of this project is to develop an array of 24 seismic sensors capable of being mounted in either a vertical or horizontal borehole. Development of this technology reduces energy usage in excavation, transportation, ventilation, and processing phases of the mining operation because less waste is mined and the mining cycle suffers fewer interruptions. This new technology benefits all types of mines, including metal/nonmetal, coal, and quarrying. The primary research tasks focused on sensor placement method, sensor housing and clamping design, and cabling and connector selection. An initial design is described in the report. Following assembly, a prototype was tested in the laboratory as well as at a surface stone quarry. Data analysis and tool performance were used for subsequent design modifications. A final design is described, of which several components are available for patent application. Industry partners have shown clear support for this …

This document presents land-based monthly surface air temperature anomalies (departures from a 1951--1970 reference period mean) on a 5{degree} latitude by 10{degree} longitude global grid. Monthly surface air temperature anomalies (departures from a 1957--1975 reference period mean) for the Antarctic (grid points from 65{degree}S to 85{degree}S) are presented in a similar way as a separate data set. The data were derived primarily from the World Weather Records and the archives of the United Kingdom Meteorological Office. This long-term record of temperature anomalies may be used in studies addressing possible greenhouse-gas-induced climate changes. To date, the data have been employed in generating regional, hemispheric, and global time series for determining whether recent (i.e., post-1900) warming trends have taken place. This document also presents the monthly mean temperature records for the individual stations that were used to generate the set of gridded anomalies. The periods of record vary by station. Northern Hemisphere station data have been corrected for inhomogeneities, while Southern Hemisphere data are presented in uncorrected form. 14 refs., 11 figs., 10 tabs.

This document presents land-based monthly surface air temperature anomalies (departures from a 1951--1970 reference period mean) on a 5{degree} latitude by 10{degree} longitude global grid. Monthly surface air temperature anomalies (departures from a 1957--1975 reference period mean) for the Antarctic (grid points from 65{degree}S to 85{degree}S) are presented in a similar way as a separate data set. The data were derived primarily from the World Weather Records and the archives of the United Kingdom Meteorological Office. This long-term record of temperature anomalies may be used in studies addressing possible greenhouse-gas-induced climate changes. To date, the data have been employed in generating regional, hemispheric, and global time series for determining whether recent (i.e., post-1900) warming trends have taken place. This document also presents the monthly mean temperature records for the individual stations that were used to generate the set of gridded anomalies. The periods of record vary by station. Northern Hemisphere station data have been corrected for inhomogeneities, while Southern Hemisphere data are presented in uncorrected form. 14 refs., 11 figs., 10 tabs.

The purpose of Phase 2 of the Investigation of Properties and Performance of Ceramic Composite Components has been to build on and extend the work completed during Phase 1 to further advance the transition from properties of ceramic composite materials to performance of ceramic composite components used in fossil energy environments. The specific tasks of Phase 2 were: (1) develop and validate reliable and accurate high temperature, biaxial mechanical tests methods for structural ceramic composite components; (2) test and evaluate ceramic composite components, specifically tubes; (3) characterize long-term, mechanical performance of ceramic composite tubes at high temperatures; (4) develop a fundamental understanding of the mechanical degradation and performance limitations of ceramic composite components under service conditions; (5) develop predictive models for damage tolerance and reliability; and (6) relate component performance to microstructure and, thereby, provide feedback to the associated process-development effort, to improve performance. Accomplishments for each task are given.

Efficient and complete recovery of petroleum reserves from existing oil wells has proven difficult due to a lack of robust instrumentation that can monitor processes in the downhole environment. Commercially available sensors for measurement of pressure, temperature, and fluid flow exhibit shortened lifetimes in the harsh downhole conditions, which are characterized by high pressures (up to 20 kpsi), temperatures up to 250 C, and exposure to chemically reactive fluids. Development of robust sensors that deliver continuous, real-time data on reservoir performance and petroleum flow pathways will facilitate application of advanced recovery technologies, including horizontal and multi-lateral wells. The main objective of the research program is to develop cost-effective, reliable fiber sensor instrumentation for real-time monitoring and /or control of various key parameters crucial to efficient and economical oil production. This report presents the detailed research work and technical progress from October 1, 1998 to September 30, 1999. The research performed over the first year of the program has followed the schedule as proposed, and solid research progress has been made in specification of the technical requirements, design and fabrication of the SCIIB sensor probes, development of the sensor systems, development of DSP-based signal processing techniques, and construction of the test …

This test program was undertaken to further the understanding of vortex shedding patterns to be experienced by the OTEC Cold Water pipe. The present series of tests was planned to incorporate improvements in design of the previously used test model and data gathering capability in order to achieve certain results which the previous program was unable to achieve. Specifically, three goals were envisioned: (1) determination of eddy shedding correlation lengths as a function of upstream shear. Improved endplate design and larger aspect ratio were the chief steps taken toward attaining this objective. (2) Determination of minimum shear level producing cellular shedding patterns. A wider range of upstream velocity shears was to be tested than in any previous study. (3) Detailed analysis of the effect of roughness on shedding patterns. A very smooth cylinder was to be tested under the same conditions as a roughened cylinder, and the two sets of results compared. Two weeks of wind tunnel testing were scheduled to perform the tests. The first week was allotted to the roughened cylinder, and the second week was devoted to examining the smooth cylinder. The experimental setup and procedures are described, and results are presented and discussed. (WHK)

Sputtered films have been formed with two improved composite (Si + CdAs/sub 2/) targets. Near stoichiometric and mechanically continuous CdSiAs/sub 2/ films have been formed on metal substrates. Films of this type will be used over the next reporting period for heterojunction formation. Evaporation studies related to CdAs/sub 2/ have been completed. Stoichiometric CdAs/sub 2/ films could not be formed by means of single-source evaporation of CdAs/sub 2/ bulk. Hence, this dual source approach (Si + CdAs/sub 2/) does not appear feasible with the techniques used thus far. Electron beam microprobe elemental analysis has been improved by changing from a GaAs standard to one of SiAs. The latter standard is more directly applicable to the compounds being measured. Accuracy of elemental composition measurements by means of the microprobe are estimated to be about +- 0.1 atomic percent. A CdS/CdSiAs/sub 2/ junction was formed on bulk CdSiAs/sub 2/. This junction gives a good diode curve (no shunting or series resistance problems), although very poor photovoltaic response. Heterojunction formation and gridding procedure have been established.

The U.S. is the largest producer of mining products in the world. In 2003, U.S. mining operations produced $57 billion worth of raw materials that contributed a total of $564 billion to the nation's wealth. Despite these contributions, the mining industry has not been well supported with research and development funds as compared to mining industries in other countries. To overcome this problem, the Center for Advanced Separation Technologies (CAST) was established to develop technologies that can be used by the U.S. mining industry to create new products, reduce production costs, and meet environmental regulations. Originally set up by Virginia Tech and West Virginia University, this endeavor has been expanded into a seven-university consortium -- Virginia Tech, West Virginia University, University of Kentucky, University of Utah, Montana Tech, New Mexico Tech and University of Nevada, Reno - that is supported through U.S. DOE Cooperative Agreement No. DE-FC26-02NT41607: Crosscutting Technology Development at the Center for Advanced Separation Technologies. Much of the research to be conducted with Cooperative Agreement funds will be longer-term, high-risk, basic research and will be carried out in five broad areas: (1) Solid-solid separation; (2) Solid-liquid separation; (3) Chemical/biological extraction; (4) Modeling and control; and (5) Environmental control. …

Automatic control of fine coal cleaning circuits has traditionally been limited by the lack of sensors for on-line ash analysis. Although several nuclear-based analyzers are available, none have seen widespread acceptance. This is largely due to the fact that nuclear sensors are expensive and tend to be influenced by changes in seam type and pyrite content. Recently, researchers at VPI&SU have developed an optical sensor for phosphate analysis. The sensor uses image processing technology to analyze video images of phosphate ore. It is currently being used by PCS Phosphate for off-fine analysis of dry flotation concentrate. The primary advantages of optical sensors over nuclear sensors are that they are significantly cheaper, are not subject to measurement variations due to changes in high atomic number minerals, are inherently safer and require no special radiation permitting. The purpose of this work is to apply the knowledge gained in the development of an optical phosphate analyzer to the development of an on-fine ash analyzer for fine coal slurries. During the past quarter, installation of the video-based ash analyzer at the Middle Fork plant site was completed. A method of measuring and automatically adjusting for small variations in the sensor illumination scheme was developed …

Over the past thirty years, process control has spread from the chemical industry into the fields of mineral and coal processing. Today, process control computers, combined with improved instrumentation, are capable of effective control in many modem flotation circuits. Unfortunately, the classical methods used in most control strategies have severe limitations when used in froth flotation. For example, the nonlinear nature of the flotation process can cause single-input, single-output lines to battle each other in attempts to achieve a given objective. Other problems experienced in classical control schemes include noisy signals from sensors and the inability to measure certain process variables. For example, factors related to ore type or water chemistry, such as liberation, froth stability, and floatability, cannot be measured by conventional means. The purpose of this project is to demonstrate an advanced control system for fine coal flotation. The demonstration is being carried out at an existing coal preparation plant by a team consisting of Virginia Polytechnic Institute and State University (VPI&SU) as the prime contractor and J.A. Herbst and Associates as a subcontractor. The objectives of this work are: (1) to identify through sampling, analysis, and simulation those variables which can be manipulated to maintain grades, recoveries, …

Automatic control of fine coal cleaning circuits has traditionally been limited by the lack of sensors for on-line ash analysis. Although several nuclear-based analyzers are available, none have seen widespread acceptance. This is largely due to the fact that nuclear sensors are expensive and tend to be influenced by changes in seam type and pyrite content. Recently, researchers at VPI and SU have developed an optical sensor for phosphate analysis. The sensor uses image processing technology to analyze video images of phosphate ore. It is currently being used by Texasgulf for off-line analysis of dry flotation concentrates. The primary advantages of optical sensors over nuclear sensors are that they are significantly cheaper, are not subject to measurement variations due to changes in high atomic number minerals, are inherently safer and require no special radiation permitting. The purpose of this work is to apply the knowledge gained in the development of an optical phosphate analyzer to the development of an on-line ash analyzer for fine coal slurries. During the past quarter, a study was conducted to determine if monochromatic illumination could be used as a means of enhancing the differences observed between coal and mineral matter under reflected light. After extensive …

The accelerated development of digital libraries and archives, in tandem with efficient search engines and the computational ability to retrieve and parse massive amounts of information, are making it possible to quantify the time evolution of scientific literatures. These data are but one piece of the tangible recorded evidence of the processes whereby scientists create and exchange information in their journeys towards the generation of knowledge. As such, these tools provide a proxy with which to study our ability to innovate. Innovation has often been linked with prosperity and growth and, consequently, trying to understand what drives scientific innovation is of extreme interest. Identifying sets of population characteristics, factors, and mechanisms that enable scientific communities to remain at the cutting edge, accelerate their growth, or increase their ability to re-organize around new themes or research topics is therefore of special significance. Yet generating a quantitative understanding of the factors that make scientific fields arise and/or become more or less productive is still in its infancy. This is precisely the type of knowledge most needed for promoting and sustaining innovation. Ideally, the efficient and strategic allocation of resources on the part of funding agencies and corporations would be driven primarily by …

This is the final report for a DOE funded project on BIOSCI Electronic Newsgroup Network for the biological sciences. A usable network for scientific discussion, major announcements, problem solving, etc. has been created.

The Advisory Committee on Human Radiation Experiments was created by President Clinton to advise the Human Radiation Interagency Working Group on the ethical and scientific criteria applicable to human radiation experiments carried out or sponsored by the U.S. Government. The Committee seeks to answer several fundamental question: What ethics criteria should be used to evaluate human radiation experiments? What was the Federal Government`s role in human radiation experiments? What are the criteria for determining appropriate Federal responses where wrongs or harms have occurred? What lessons learned from studying past and present research standards and practices should be applied to the future? The Committee has been gathering vast amounts of information and working to render it orderly and accessible. In the next six months, the Committee will continue with the tasks of data gathering and organizing. The focus of the work, however, will be developing criteria for judging historical and contemporary experiments, policies, and procedures, as well as criteria for remedies that may be appropriate where harms or wrongs have ocurred. Based on findings, the Committee will make specific recommendations regarding policies for the future.

This Progress Report for Project 1.4 of the U.S.–Russia Joint Coordinating Committee on Radiation Effects Research continues in the abbreviated format of providing details only on the work accomplished during this six-month reporting period.

The United States Transuranium and Uranium Registries (USTUR) are a human tissue research program studying the deposition, biokinetics and dosimetry of the actinide elements in humans with the primary goals of providing data fundamental to the verification, refinement, or future development of radiation protection standards for these and other radionuclides, and of determining possible bioeffects on both a macro and subcellular level attributable to exposure to the actinides. This annual report covers October 1, 1997, through January 31, 1999; the reporting period has been extended so that future annual reports will coincide with the period covered by the grant itself.

Drawing to a close after five years of funding from DOE's ASCR and BER program offices, the SciDAC-2 project called the Earth System Grid (ESG) Center for Enabling Technologies has successfully established a new capability for serving data from distributed centers. The system enables users to access, analyze, and visualize data using a globally federated collection of networks, computers and software. The ESG software - now known as the Earth System Grid Federation (ESGF) - has attracted a broad developer base and has been widely adopted so that it is now being utilized in serving the most comprehensive multi-model climate data sets in the world. The system is used to support international climate model intercomparison activities as well as high profile U.S. DOE, NOAA, NASA, and NSF projects. It currently provides more than 25,000 users access to more than half a petabyte of climate data (from models and from observations) and has enabled over a 1,000 scientific publications.