This Index provides a description of all wind summaries available at the National Climatic Center.

None

Data collected during studies of Onslow Bay, off the North Carolina coast during cruises during September, 1975, are reported. Current meters and thermography were placed at depths of 10 and 22 m along the 28 m isobath in the northeastern and southwestern sectors of the Bay. Data are included on wind turbulence and velocity; seawater salinity and temperature at various depths; the content of nitrates, phosphates, silicate, oxygen, chlorophyll, and phytoplankton biomass at various depths. Hydrographic and meteorologic conditions during the cruises are included. (CH)

A computational method to determine cross-section requirements quantitatively is described and applied to the Tokamak Fusion Test Reactor (TFTR). In order to provide a rational basis for the priorities assigned to new cross- section measurements or evaluations, this method includes quantitative estimates of the uncertainty of currently available data, the sensitivity of important nuclear design parameters to selected cross sections, and the accuracy desired in predicting nuclear design parameters. Perturbation theory is used to combine estimated cross-section uncertainties with calculated sensitivities to determine the variance of any nuclear design parameter of interest. (auth)

Using a two-dimensional algorithm, steering of triode slots was investigated for the first time with a reasonable accounting of the ion extraction sheath.

Single rovibrational states of HCl(v=2), HBr(v=2), DCl(v=2), and CO(v=2) were excited with a pulsed optical parametric oscillator (OPO). Total vibrational relaxation rates near - resonance quenchers were measured at 295/sup 0/K using time resolved infrared fluorescence. These rates are attributed primarily to V - V energy transfer, and they generally conform to a simple energy gap law. A small deviation was found for the CO(v) + DCl(v') relaxation rates. Upper limits for the self relaxation by V - R,T of HCl(v=2) and HBr(v=2) and for the two quantum exchange between HCl and HBr were determined. The HF dimer was detected at 295/sup 0/K and 30 torr HF pressure with an optoacoustic spectrometer using the OPO. Pulsed and chopped, resonant and non-resonant spectrophones are analyzed in detail. From experiments and first order perturbation theory, these V - V exchange rates appear to behave as a first order perturbation in the vibrational coordinates. The rotational dynamics are known to be complicated however, and the coupled rotational - vibrational dynamics were investigated theoreticaly in infinite order by the Dillon and Stephenson and the first Magnus approximations. Large ..delta..J transitions appear to be important, but these calculations differ by orders of magnitude on specific …

None

None

Two PLT-injector-type duoPIGatron sources, modified further by shaping the beam-forming apertures, have been tested and experimented on a prototype beam line similar to the ISX-B neutral beam injection system. The accelerator column modification has resulted in an increase of the beam power transmission efficiency from that of the straight-bore aperture by 50%. Maximum neutral beam powers achieved on a 28-cm-diam target simulating the ISX-B plasma, located 4.1 m downstream from the source, are congruent to 910 kW of H/sup 0/ at an accelerator power of 42 kV and 61 A and congruent to 1020 kW of D/sup 0/ at 43 kV and 55 A. Measurements have been made to investigate the following: the effects on beam optics of aperture shape, aspect ratio, and different ions (H/sup +/ or D/sup +/); the distribution of beam power deposition along the beam line; ion species compositions; and background pressure behavior due to scraped-off beam particles.

Experiments were performed to assess the operating characteristics and potential performance of water-augmented dry cooling systems. The work was aimed at evaluating a deluged air-cooled HOETERV plate fin heat exchanger surface proposed for integrated dry/wet cooling systems and using test results to guide the development of a predictive analytical model. In the process, all-dry performance data were obtained for the HOETERV surface as well as for two Curtiss-Wright chipped fin surfaces. The dry heat transfer data indicate that a slotted Curtiss-Wright surface slightly outperforms the HOETERV and nonslotted Curtiss-Wright surfaces based on heat rejection rate per unit of fan power. However, all three surfaces are so close in performance that other factors, such as surface cost and piping and mounting costs, will probably determine which surface is preferred at a given installation. Comparisons of deluged HOETERV performance with dry HOETERV and Curtiss-Wright performance under prototypic conditions have established that deluging can provide considerable heat rejection enhancement, particularly at low ITD and low air humidity. A deluged HOETERV core operating at a 115/sup 0/F primary fluid temperature in 105/sup 0/F air at 10% relative humidity can reject over 7 times as much heat as a dry HOETERV core operating under the …

A stress analysis has been completed for the LOFT piping nozzles penetrating through the containment vessel in accordance with the 1965 edition of Section III of the ASME Boiler and Pressure Vessel Code. LOFT Specification S-1 states that the 1965 edition, including the addenda through the summer 1966 issue, be used. Stresses in the containment wall and in the nozzles result from mechanical and thermal loads on the piping that penetrate the nozzles. The mechanical loads were compiled in LTR 1217-7 and the temperature gradients were provided by the Thermal Analysis Branch. This analysis indicates that the nozzles and the containment wall are adequate to sustain the given mechanical and thermal loads. Therefore, it is recommended that paragraph number S1-04, section M of LOFT specification S-1 be revised to list the nozzle loads presented in Table 3, page A-3a. 9 refs.

Information is presented concerning basic wind turbine energy conversion; wind behavior and site selection; power and energy requirements; the components of a wind energy conversion system; selecting a wind energy conversion system and system economics; and legal aspects.

None

The General Atomic cold head-end reprocessing pilot plant has been built to demonstrate the feasibility of the proposed commercial reprocessing flowsheet, in particular its integrated operation. This integration is accomplished in part by the solids handling system, which is designed to provide transfer of material at required rates between different steps in the process and to provide the required surge capacity. The major components of the solids handling system have been tested in order to verify or upgrade the design. The components described here are: inlet filters, conveying lines, bunkers, in-bunker filters, blowers, level sensors, feeders, and weigh cells. By and large, the equipment has performed as expected. Feeding of the various materials in the system has received considerable attention, and several improvements were necessary. The system is now equipped to perform its function of serving the needs of the other unit operations in the pilot plant.

This report is a collection of cases that were appealed to the Supreme Court that relate to subversive activities.

Stress-strain data which describes the influence of strain rate and temperature on the mechanical response of materials presently being used for light water reactor fuel shipping containers have been assembled. Selection of data has been limited to that which is suitable for use in finite-element elastic--plastic analysis of shipping containers (e.g., they must include complete material history profiles). Based on this information, recommendations have been made for further work which is required to complete the necessary data base.

Possible impacts of energy technologies on agriculture are evaluated, and some of the available simulation models that can be used for predictive purposes are identified. An overview of energy technologies and impacts on the environment is presented to provide a framework for the commentary on the models. Coal combustion is shown to have major impacts on the environment and these will continue into the next century according to current Department of Energy projections. Air pollution effects will thus remain as the major impacts on crop ecosystems. Two hundred reports were evaluated, representing a wide range of models increasing in complexity from mathematical functions (fitted to data) through parametric models (which represent phenomena without describing the mechanisms) to mechanistic models (based on physical, chemical, and physiological principles). Many models were viewed as suitable for adaptation to technology assessment through the incorporation of representative dose-response relationships. It is clear that in many cases available models cannot be taken and directly applied in technology assessment. Very few models of air pollutant-crop interactions were identified, even though there is a considerable data base of pollutant effects on crops.

The mirrors used on concentrating solar systems must be able to withstand severe and sustained environmental stresses for long periods of time if they are to be economically acceptable. Little is known about how commercially produced wet process silvered second surface mirrors will withstand the test of time in solar applications. Field experience in existing systems has shown that the performance of the reflective surface varies greatly with time and is influenced to a large extent by the construction details of the mirror module. Degradation of the reflective layer has been seen that ranges from non-observable to severe. The exact mechanisms involved in the degradation process are not well understood from either the phenomenological or microanalytical points of view and are thus subject to much debate. The three chapters of this report summarize the work recently performed in three general areas that are key to understanding and ultimately controlling the degradation phenomena. These areas are: a survey of the present commercial mirroring industry, the microanalytical examination of numerous degraded and nondegraded mirrors, and an investigation of several novel techniques that might be used to extend the life of heliostat mirrors. Appendices include: (a) list of mirror manufacturers and (b) recommended …

The performance of a modified duoPIGatron ion source for PLT neutral beam injectors is described. The 22-cm source has been operated to deliver beams of 70 A, up to 45 keV, and 0.5 sec. Following a brief review of source operation, the dominant reactions leading to an enhanced atomic ion fraction in the source plasma are emphasized. In addition to the high atomic ion species yield (about 85%), other important characteristics of the source such as high arc efficiency (about 1.1 A ion beam current per kW of arc power), long filament lifetime, high reliability, and scalability are also described.

This report presents a computer algorithm for determining the degree of heterogeneity among the layers of a reservoir. The algorithm uses the equations developed by Brigham and Smith that predict the behavior of a tracer slug flowing in a five-spot injection pattern. To illustrate the use and potential problems in the application of this algorithm, examples are presented using five sets of simulated field test data. One example using actual field data is also presented.

Over the past quarter of a century there has been a significant amount of work on modification of internal combustion (IC) engines to operate on hydrogen. However, comparisons are difficult because of large variation in designs, engine parameters, and test conditions. A comparative summary of the recent work on hydrogen-powered engines is presented under a unifying format. This summary includes material extracted from published reports and obtained by private communication. It is intended that this survey be of value to those beginning work in the field, and will provide some guidance in determining the direction of future research. Included are the following: engine parameters, modifications, operating conditions, running characteristics, performance, and related comments. More detailed discussion is included on the manpower and material costs associated with the modification of one of the engines listed.

This report establishes standard unit costs and scaling rules for estimating costs of material, equipment, land, and labor components used in magnetic confinement fusion reactor plant construction and operation. Use of the standard unit costs and scaling rules will add uniformity to cost estimates, and thus allow valid comparison of the economic characteristics of various reactor concepts.

None

None