The present TENSOR code is a descendant of a code originally conceived by Maenchen and Sack and later adapted by Cherry. Originally, the code was a two-dimensional Lagrangian explicit finite difference code which solved the equations of continuum mechanics. Since then, implicit and arbitrary Lagrange-Euler (ALE) algorithms have been added. The code has been used principally to solve problems involving the propagation of stress waves through earth materials, and considerable development of rock and soil constitutive relations has been done. The code has been applied extensively to the containment of underground nuclear tests, nuclear and high explosive surface and subsurface cratering, and energy and resource recovery. TENSOR is supported by a substantial array of ancillary routines. The initial conditions are set up by a generator code TENGEN. ZON is a multipurpose code which can be used for zoning, rezoning, overlaying, and linking from other codes. Linking from some codes is facilitated by another code RADTEN. TENPLT is a fixed time graphics code which provides a wide variety of plotting options and output devices, and which is capable of producing computer movies by postprocessing problem dumps. Time history graphics are provided by the TIMPLT code from temporal dumps produced during production …

Five papers are included: feasibility experiment for sodium-alyer laser guide stars at LLNL; system design for a high power sodium beacon laser; sodium guide star adaptive optics system for astronomical imaging in the visible and near-infrared; high frame-rate, large field wavefront sensor; and resolution limits for ground-based astronomical imaging. Figs, tabs, refs.

This sampling and analysis plan (SAP) describes planned data collection activities for four entry boreholes through the sediment overlying the Saddle Mountains Basalt, up to three new deep rotary boreholes through the Saddle Mountains Basalt and sedimentary interbeds, and one corehole through the Saddle Mountains Basalt and sedimentary interbeds at the Waste Treatment Plant (WTP) site. The SAP will be used in concert with the quality assurance plan for the project to guide the procedure development and data collection activities needed to support borehole drilling, geophysical measurements, and sampling. This SAP identifies the American Society of Testing Materials standards, Hanford Site procedures, and other guidance to be followed for data collection activities. Revision 3 incorporates all interim change notices (ICN) that were issued to Revision 2 prior to completion of sampling and analysis activities for the WTP Seismic Boreholes Project. This revision also incorporates changes to the exact number of samples submitted for dynamic testing as directed by the U.S. Army Corps of Engineers. Revision 3 represents the final version of the SAP.

The investigation focused on heterogeneous networks in which a variety of dissimilar computers and operating systems were interconnected nationwide. Homogeneous networks, such as MFE net and SACNET, were not considered since they could not be used for general purpose resource sharing. Issues of privacy and security are of concern in any network activity. However, consideration of privacy and security of sensitive data arise to a much lesser degree in unclassified scientific research than in areas involving personal or proprietary information. Therefore, the existing mechanisms at individual sites for protecting sensitive data were relied on, and no new protection mechanisms to prevent infringement of privacy and security were attempted. Further development of ERDA networking will need to incorporate additional mechanisms to prevent infringement of privacy. The investigation itself furnishes an excellent example of computational resource sharing through a heterogeneous network. More than twenty persons, representing seven ERDA computing sites, made extensive use of both ERDA and non-ERDA computers in coordinating, compiling, and formatting the data which constitute the bulk of this report. Volume 3 analyzes the benefits and barriers encountered in actual resource sharing experience, and provides case histories of typical applications.

Fabrication of internal reflector pieces for the SNAP-8 core is described. These reflectors were made of BeO, with and without the addition of Sm/sub 2/O/sub 3/ as a nuclear poison. Because of the high density and dimensional tolerance requirements, the complexity of shapes, and the comparatively modest number of parts to be produced (approximately 1000), the blanks were hot pressed and subsequently machined with diamond wheels and cores. In almost all cases, the specified density of 98% of theoretical was achieved. The low eutectic temperature in the BeO--Sm/sub 2/O/sub 3/ system of about 1420 deg C necessitated special pressing parameters, which were arrived at by experimentation. A rather coarse grit size (80) was used for the diamond wheels, which resulted in very little wear to the wheels, and an extremely low dimensional rejection rate on the blanks. Because of the toxicity of BeO, all equipment was enclosed, and was held under negative pressure. (auth)

Proposed development of domestic energy resources, including wind energy, is expected to impact the sagebrush steppe ecosystem in the western United States. The greater sage-grouse relies on habitats within this ecosystem for survival, yet very little is known about how wind energy development may affect sage-grouse. The purpose of this report is to inform organizations of the impacts wind energy development could have on greater sage-grouse populations and identify information needed to fill gaps in knowledge.

In support of CH2M HILL Hanford Group, Inc.'s (CHG) preparation of a Field Investigative Report (FIR) for the closure of the Hanford Site Single-Shell Tank (SST) Waste Management Area (WMA) tank farms, a set of numerical simulations of flow and solute transport was executed to predict the performance of surface barriers for reducing long-term risks from potential groundwater contamination at the C Farm WMA. This report documents the simulation of 14 cases (and two verification cases) involving two-dimensional cross sections through the C Farm WMA tanks C-103 – C-112. Utilizing a unit release scenario at Tank C-112, four different types of leaks were simulated. These simulations assessed the impact of leakage during retrieval, past leaks, and tank residual wastes and tank ancillary equipment following closure activities. . Two transported solutes were considered: uranium-238 (U-238) and technetium-99 (Tc-99). To evaluate the impact of sorption to the subsurface materials, six different retardation coefficients were simulated for U-238. Overall, simulations results for the C Farm WMA showed that only a small fraction of the U-238 with retardation factors greater than 0.6 migrated from the vadose zone in all of the cases. For the conservative solute, Tc-99, results showed that the simulations investigating leakages …

The Nuclear Waste Policy Act of 1982 (Public Law 97-425), as amended by Public Law 100-203, December 22, 1987, established the Office of Civilian Radioactive Waste Management (OCRWM) within the Department of Energy (DOE), and directed the Office to investigate a site at Yucca Mountain, Nevada, to determine if this site is suitable for the construction of a repository for the disposal of high level nuclear waste. Work on site characterization has been under way for several years. Thus far, about $1.47 billion have been spent on Yucca Mountain programs. This work has been funded by Congressional appropriations from a Nuclear Waste Fund to which contributions have been made by electric utility ratepayers through electric utilities generating power from nuclear power stations. The Secretary of Energy and the Governor of the State of Nevada have appointed one person each to a panel to oversee an objective, independent financial and management evaluation of the Yucca Mountain Project. The Requirements for the work will include an analysis of (1) the Yucca Mountain financial and, contract management techniques and controls; (2) Project schedules and credibility of the proposed milestones; (3) Project organizational effectiveness and internal planning processes, and (4) adequacy of funding levels …