This report presents the analyses results for three samples obtained under RPP-PLAN-28509, Sampling and Analysis Plan for Building 241 702-AZ A Train. The sampling and analysis was done in response to problem evaluation request number PER-2004-6139, 702-AZ Filter Rooms Need Radiological Cleanup Efforts.

This report was developed to assist Congress in responding to some commonly asked questions about the Internet of Things (IoT), a complex, often poorly understood phenomenon.

N/A

"The field of a uniformly loaded wing in subsonic flow is discussed in terms of the acceleration potential. It is shown that, for the design of such wings, the slope of the mean camber surface at any point can be determined by a line integration around the wing boundary. By an additional line integration around the wing boundary, this method is extended to include the case where the local section lift coefficient varies with spanwise location (the chordwise loading at every section still remaining uniform)" (p. 471).

This report details the chemical and radionuclide contaminant results for the characterization of the 2009 Third Quarter sampling of Tank 50 for the Saltstone Waste Acceptance Criteria (WAC). Information from this characterization will be used by Liquid Waste Operations (LWO) to support the transfer of low-level aqueous waste from Tank 50 to the Salt Feed Tank in the Saltstone Facility in Z-Area, where the waste will be immobilized. This information is also used to update the Tank 50 Waste Characterization System. Recently, a review of the radionuclide inventory in Saltstone Vaults 1 and 4 identified several additional radionuclides, not currently in the WAC, which require quantification ({sup 40}K, {sup 108m}Ag, {sup 133}Ba, {sup 207}Bi, {sup 227}Ac, {sup 228}Ra, {sup 228}Th, {sup 231}Pa, {sup 247}Cm, {sup 249}Cf, {sup 251}Cf). In addition, several of the radionuclides previously reported with minimum detection limits below the requirements listed in the WAC required analysis with reduced detection limits to support future inventory reporting requirements ({sup 22}Na, {sup 26}Al, {sup 59}Ni, {sup 94}Nb, {sup 106}Ru, {sup 144}Ce, {sup 152}Eu, {sup 155}Eu, {sup 226}Ra). This added scope was formally requested in a revision to the standing Technical Task Request for CY2009 Saltstone support and is further discussed …

The 12 in. H and V Duct and related piping outside the LOFT containment and connected to containment penetration S-11B was analyzed to ASME Code, Subsection NC (Class 2) criteria. This duct is part of the Containment Isolation System. The model considered the duct from the containment O.D. outward through the second isolation valve. Results of this analysis show that this section of the line will meet Class 2 requirements without modification.

Report presenting an exploratory investigation of three aluminum disoaps of C(sub 8) acids to determine the gelling properties and stabilizing ability in slurries of 50 percent magnesium power and JP-4 fuel. All of the soaps were found to gel the slurries satisfactorily and to exhibit adequate reproducibility of gel properties. Results regarding the soap behaviors, effects of temperature, viscosity, and formation of the gel structures are provided.

This report provides information about The Role of State and Local Law Enforcement on Enforcing Immigration Law.

Line /sup 1///sub 2/''-PCS-6-VA outside the LOFT containment penetration S-5B was analyzed to ASME Code, Subsection NC (Class 2) criteria. This piping is part of the Containment Isolation System. The model considered the piping from the penetration through one isolation valve and to the first wall through which the line passes. Results of this anlysis show that this section of the line will meet Class 2 requirements without modification.

This report discusses the Summary of 911 Legislation and Policy, Funding and Grants and National Broadband Plan.

A letter report issued by the Government Accountability Office with an abstract that begins "GAO is required to annually audit the financial statements of the Deposit Insurance Fund (DIF) and FSLIC Resolution Fund (FRF), which are administered by the Federal Deposit Insurance Corporation (FDIC). GAO is responsible for obtaining reasonable assurance about whether FDIC's financial statements for DIF and FRF are presented fairly in all material respects, in conformity with U.S. generally accepted accounting principles, and whether FDIC maintained effective internal control over financial reporting and compliance. Also, GAO is responsible for testing FDIC's compliance with selected laws and regulations. Created in 1933 to insure bank deposits and promote sound banking practices, FDIC plays an important role in maintaining public confidence in the nation's financial system. In 1989, legislation to reform the federal deposit insurance system created three funds to be administered by FDIC: the Bank Insurance Fund (BIF) and the Savings Association Insurance Fund (SAIF), which protect bank and savings deposits, and FRF, which was created to close out the business of the former Federal Savings and Loan Insurance Corporation. In accordance with subsequent legislation passed in 2006, FDIC merged the BIF and SAIF into the newly established DIF …

This report discusses possible paths toward the modernization of the 911 emergency response system's infrastructure.

None

This report seeks to shed light on whether Senate processing of lower court nominations, particularly to the courts of appeals, has tended over recent decades to slow down in presidential election years. The report begins by reviewing recent debate, and historical events dating back to 1980, concerning whether the Senate and its Judiciary Committee customarily observe a practice referred to as the "Thurmond rule." Next, the report provides narratives on each presidential election year from 1980 to 2004, reviewing Senate and committee actions taken on court of appeals and district court nominations in each of the years. The report then compares these years quantitatively, examining the number and percent of nominations processed and the last dates of committee and Senate action taken.

"A summary of methods for making dynamic lateral stability and response calculations and for estimating the aerodynamic stability derivatives required for use in these calculations is presented. The processes of performing calculations of the time histories of lateral motions, of the period and damping of these motions, and of the lateral stability boundaries are presented as a series of simple straightforward steps. Existing methods for estimating the stability derivatives are summarized and, in some cases, simple new empirical formulas are presented. Detailed estimation methods are presented for low-subsonic-speed conditions but only a brief discussion and a list of references are given for transonic and supersonic speed conditions" (p. 1).

This report presents results obtained from detailed hydrologic characterization of the unconfined aquifer system conducted at the Hanford Site.

The Electric Power Monthly (EPM) presents monthly electricity statistics. The purpose of this publication is to provide energy decisionmakers with accurate and timely information that may be used in forming various perspectives on electric issues that lie ahead. The EPM is prepared by the Survey Management Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the US, Census division, and State levels for net generation, fossil fuel consumption and stocks, quantity and quality of fossil fuels, cost of fossil fuels, electricity sales, revenue, and average revenue per kilowatthour of electricity sold. Data on net generation, fuel consumption, fuel stocks, quantity and cost of fossil fuels are also displayed for the North American Electric Reliability Council (NERC) regions.

Laboratory testing was performed to develop a comprehensive understanding of the corrosivity of the tank wastes stored in Double-Shell Tanks using simulants primarily from Tanks 241-AP-105, 241-SY-103 and 241-AW-105. Additional tests were conducted using simulants of the waste stored in 241-AZ-102, 241-SY-101, 241-AN-107, and 241-AY-101. This test program placed particular emphasis on defining the range of tank waste chemistries that do not induce the onset of localized forms of corrosion, particularly pitting and stress corrosion cracking. This document summarizes the key findings of the research program.

The EPM is prepared by the Electric Power Division; Office of Coal, Nuclear, Electric and Alternate Fuels, Energy Information Administration (EIA), Department of Energy. This publication provides monthly statistics at the national, Census division, and State levels for net generation, fuel consumption, fuel stocks, quantity and quality of fuel, electricity sales, and average revenue per kilowatthour of electricity sold. Data on net generation are also displayed at the North American Electric Reliability Council (NERC) region level. Additionally, company and plant level information are published in the EPM on capability of new plants, net generation, fuel consumption, fuel stocks, quantity and quality of fuel, and cost of fuel. Quantity, quality, and cost of fuel data lag the net generation, fuel consumption, fuel stocks, electricity sales, and average revenue per kilowatthour data by 1 month. This difference in reporting appears in the national, Census division, and State level tables. However, at the plant level, all statistics presented are for the earlier month for the purpose of comparison. 40 tabs.

A letter report issued by the General Accounting Office with an abstract that begins "Because of the significance of Internal Revenue Service (IRS) collections to federal receipts and, in turn, to the consolidated financial statements of the U.S. government, which GAO is required to audit, and Congress's interest in financial management at IRS, GAO audits IRS's financial statements annually to determine whether (1) the financial statements IRS prepares are reliable, (2) IRS management maintained effective internal controls, and (3) IRS complies with selected provisions of significant laws and regulations and its financial systems comply with the Federal Financial Management Improvement Act of 1996 (FFMIA)."

As a net shape process, die casting is intrinsically efficient and improvements in energy efficiency are strongly dependent on design and process improvements that reduce scrap rates so that more of the total consumed energy goes into acceptable, usable castings. A casting that is distorted and fails to meet specified dimensional requirements is typically remelted but this still results in a decrease in process yield, lost productivity, and increased energy consumption. This work focuses on developing, and expanding the use of, computer modeling methods that can be used to improve the dimensional accuracy of die castings and produce die designs and machine/die setups that reduce rejection rates due to dimensional issues. A major factor contributing to the dimensional inaccuracy of the casting is the elastic deformations of the die cavity caused by the thermo mechanical loads the dies are subjected to during normal operation. Although thermal and die cavity filling simulation are widely used in the industry, structural modeling of the die, particularly for managing part distortion, is not yet widely practiced. This may be due in part to the need to have a thorough understanding of the physical phenomenon involved in die distortion and the mathematical theory employed in …

A letter report issued by the Government Accountability Office with an abstract that begins ""

Separate abstracts were prepared for the 16 papers presented in ERA; 10 are included in EAPA. (WHK)

This is the twenty-eighth in a series of semiannual technical progress reports on fusion materials. This report combines the full spectrum of research and development activities on both metallic and non-metallic materials with primary emphasis on the effects of the neutronic and chemical environment on the properties and performance of materials for in-vessel components. This effort forms one element of the materials program being conducted in support of the Fusion Energy Sciences Program of the U.S. Department of Energy. The other major element of the program is concerned with the interactions between reactor materials and the plasma and is reported separately.