None

Conversion electrons from the decay of low-lying levels of /sup 237/Np have been measured to detect the population of these levels by gamma-ray decay of the /sup 237/Np shape isomer. Analysis of the 208-keV transition L conversion-electron peak gives an upper limit of about 17 ..mu..b for the population of the 3/2/sup -/ 267-keV level in /sup 237/Np from the shape isomer decay. Model calculations are compared with the measured limit. Improvements are suggested for this experiment. 9 refs., 4 figs.

A systematic investigation of K x-ray production for 20-80 MeV Cl ions in collision with thin self-supporting Cu targets has been conducted. Target and projectile characteristic x rays and radiative electron capture (REC) have been measured as a function of target thickness for incident charge states q < z{sub 1} - 2. At 80 MeV data were also obtained for q = z{sub 1}- 1. Large enhancements in both characteristic x-ray production and REC were observed for q = z{sub 1}- 1. Measured x-ray yields were parametrized vs. target thickness using the model of Betz et al. and least squares fits to the data were performed. Target K x-ray production for q<z{sub 1}-2 is described reasonably well by the CPSSR + ECR theory. For q=z{sub 1} - 1 the enhancement in the x-ray yield is predicted quite well by the method of Gray et al· The mean fluorescence yield for the highly stripped Cl ions is determined and found to increase by a factor of about six over the range 20-80 MeV, having a value (~0.1) nearly equal to the single K-vacancy value at 20 MeV. The radiative lifetime for the projectile ions is found to be ~3 x 10{sup …

The Ninth Underground Coal Gasification Symposium was held August 7 to 10, 1983 at the Indian Lakes Resort and Conference Center in Bloomingdale, Illinois. Over one-hundred attendees from industry, academia, National Laboratories, State Government, and the US Government participated in the exchange of ideas, results and future research plans. Representatives from six countries including France, Belgium, United Kingdom, The Netherlands, West Germany, and Brazil also participated by presenting papers. Fifty papers were presented and discussed in four formal sessions and two informal poster sessions. The presentations described current and future field testing plans, interpretation of field test data, environmental research, laboratory studies, modeling, and economics. All papers were processed for inclusion in the Energy Data Base.

The Fourteenth Workshop on Geothermal Reservoir Engineering was held at Stanford University on January 24--26, 1989. Major areas of discussion include: (1) well testing; (2) various field results; (3) geoscience; (4) geochemistry; (5) reinjection; (6) hot dry rock; and (7) numerical modelling. For these workshop proceedings, individual papers are processed separately for the Energy Data Base.

The attendance at the Workshop was similar to last year's with 123 registered participants of which 22 represented 8 foreign countries. A record number of technical papers (about 60) were submitted for presentation at the Workshop. The Program Committee, therefore, decided to have several parallel sessions to accommodate most of the papers. This format proved unpopular and will not be repeated. Many of the participants felt that the Workshop lost some of its unique qualities by having parallel sessions. The Workshop has always been held near the middle of December during examination week at Stanford. This timing was reviewed in an open discussion at the Workshop. The Program Committee subsequently decided to move the Workshop to January. The Tenth Workshop will be held on January 22-24, 1985. The theme of the Workshop this year was ''field developments worldwide''. The Program Committee addressed this theme by encouraging participants to submit field development papers, and by inviting several international authorities to give presentations at the Workshop. Field developments in at least twelve countries were reported: China, El Salvador, France, Greece, Iceland, Italy, Japan, Kenya, Mexico, New Zealand, the Philippines, and the United States. There were 58 technical presentations at the Workshop, of …

Abstracts of individual items from the symposium were prepared separately for the data base. (GHT)

The use of drilling and coring methods that minimize the disturbance of formation rock and core has permitted field calibration of neutron-moisture tools in relatively large diameter cased and uncased boreholes at Yucca Mountain, Nevada. For 5.5-inch diameter cased holes, there was reasonable agreement between a field calibration in alluvium-colluvium and a laboratory calibration in a chamber containing silica sand. There was little difference between moisture-content profiles obtained in a neutron-access hole with a hand-held neutron-moisture meter and an automated borehole-logging tool using laboratory-generated calibration curves. Field calibrations utilizing linear regression analyses and as many as 119 data pairs show a good correlation between neutron-moisture counts and volumetric water content for sections of uncased 6-inch diameter boreholes in nonwelded and bedded tuff. Regression coefficients ranged from 0.80 to 0.94. There were only small differences between calibration curves in 4.25- and 6-inch uncased sections of boreholes. Results of analyzing field calibration data to determine the effects of formation density on calibration curves were inconclusive. Further experimental and theoretical work is outlined.

The U.S. magnetic fusion energy program has developed a single design long pulse neutral beam source for TFTR, MFTF-B, and DIII-D. The arc is a very compact axial magnetic line cusp. The accelerator is an actively cooled tetrode with water cooled grid tubes of shaped molybdenum forming 'slot' beamlets. DIII-D and MFTF-B configurations have an 80 kV accelerator gap, with 12 x 48 cm aperture, and a 10 meter 'module' focus. TFTR modules are unfocused, with a 120 kV gap and 12 x 43 cm mask. The first CLPS was tested in the TFTR configuration, at 120 kV, 2 seconds. Optimum current was 73 Amperes, or 1.76 ppervs (deuterium), with 80% - 85% atomic fraction. Optimum divergence of ions plus neutrals was 0.4' parallel to the slots, and 0.7' perpendicular to the slots ( l / e half angle). The combination of an axial cusp magnetic bucket and slot accelerator apertures gives the CLPS about twice the beam power per unit cross section of other long pulse sources, plus lower divergence in the direction parallel to the slots.

A tracer test was carried out in a geothermal doublet system to study the injection behavior of a developed reservoir known to be fractured. The doublet produces about 320 gpm of 160 F water that is used for space heating and then injected; the wells are spaced 250 ft apart. Tracer breakthrough was observed in 2 hours and 45 minutes in the production well, indicating fracture flow. However, the tracer concentrations were low and indicated porous media flow; the tracers mixed with a reservoir volume much larger than a fracture.

We present an analytic theory of Richtmyer-Meshkov instabilities in an arbitrary number N of stratified fluids subjected to a shock. Following our earlier work on Rayleigh-Taylor instabilities, the theory assumes incompressible flow in which a shock is treated an impulsive acceleration, g = ..delta.. v delta(tau/sub s), ..delta..v being the jump velocity induced in the system by a shock at time tau/sub s/. We discuss the special cases N = 2 and N = 3, and illustrate both Rayleigh-Taylor and Richtmyer-Meshkov instabilities by examples patterned after inertial confinement fusion implosions.

Acoustic compressional and shear-wave velocities have been measured on a suite of ten sandstone samples obtained from wells in the Cerro Prieto geothermal field and on two rock samples from other Mexican geothermal fields. The samples were tested in both their dry and fully brine-saturated states at uniaxial stresses to 15 MPa. Electrical resistivities and associated phase angles have been measured on the same core samples as a function of frequency in the range 10 Hz to 10/sup 5/ Hz under drained conditions at hydrostatic confining stresses to 10 MPa. The electrical properties were measured on samples tested in their fully saturated state, using brines of two different concentrations.

In this talk on magnetic monopoles, first the author briefly reviews some historical background; then, the author describes what several different types of monopoles might look like; and finally the author discusses the experimental situation. 81 references.

Personal reminiscences of the author's work at the Bevatron in the 1950's are given. Setting up photographic emulsions and startup of the Bevatron are recalled. A brief account is given of the physics prior to the Bevatron, followed by the development of the machine and its use to study K mesons, theta and tau particles. The search for the antiproton is remembered. 16 refs., 6 figs. (LEW)

The demonstration nature of the Baca Geothermal Project and the contractual arrangements between Public Service Company of New Me (PNM) and Union Geothermal Company of New Mexico (Union) with the Department of Energy mandate on environmental monitoring effort previously not seen for an energy development of this size. One of the most often stated goals of the Baca Project is to demonstrate the acceptability and viability of geothermal energy in an environmentally responsible manner. If this statement is to be followed, then a program would have to be developed which would (1) identify all the environmental baseline parameters, (2) monitor them during construction and operation, and (3) alleviate any possible negative impacts. The situation of the Baca project in the Jemez Mountains of north-central New Mexico offers a challenging vehicle with which to demonstrate the acceptability of geothermal energy. A few of the reasons for this are: these mountains are one of the most heavily used recreational resource areas in the state, numerous prehistoric people utilized the canyons and have left considerable archeological resources, the mountains are home for a number of individuals who prefer their serenity to the hustle and bustle of urban dwelling, and finally, the mountains are …

Over the past decade small-angle neutron scattering (SANS), has found numerous applications in the fields of biology, polymer science, physical chemistry, materials science, metallurgy, colloids, and solid state physics. A number of excellent references are available which contain basic neutron scattering theory though these text books reflect the origins of the technique and the examples are largely drawn from physics e.g., single crystals, simple liquids, monatomic gases, liquid metals, magnetic materials, etc. in view of the large numbers of nonspecialists who are increasingly using neutron scattering, the need has become apparent for presentations which can provide rapid access to the method without unnecessary detail and mathematical rigor. This article is meant to serve as a general introduction to the symposium ''Scattering Deformation and Fracture in Polymers,'' and is intended to aid potential users who have a general scientific background, but no specialist knowledge of scattering, to apply the technique to provide new information in areas of their own particular interests. In view of space limitations, the general theory will be given in the case for neutron scattering and analogies and differences with photon scattering (x-rays) will be pointed out at the appropriate point. 90 refs., 6 figs.

Fifteen papers and abstracts are included. Separate abstracts were prepared for six papers and nine abstracts were listed by title.

The meeting consisted of the following six sessions: (1) plenary session I; (2) disposal technology; (3) characteristics and treatment of low-level waste; (4) environmental aspects and performance prediction; (5) overall summary sessions; and (6) plenary session II. Fifty two papers of the papers presented were processed for inclusion in the Energy Data Base. (ATT)

Thirty-eight papers are included. One was indexed previously for EDB. Separate abstracts were prepared for thirty-three papers and two were listed by title. Reports of two workshop discussion groups on Achieving Technical Performance and Obtaining a License and Protecting the Environment were not abstracted for EDB. (MHR)