We revisit the pair creation constraint on superluminal neutrinos considered by Cohen and Glashow in order to clarify which types of superluminal models are constrained. We show that a model in which the superluminal neutrino is effectively light-like can evade the Cohen-Glashow constraint. In summary, any model for which the CG pair production process operates is excluded because such timelike neutrinos would not be detected by OPERA or other experiments. However, a superluminal neutrino which is effectively lightlike with fixed p{sup 2} can evade the Cohen-Glashow constraint because of energy-momentum conservation. The coincidence involved in explaining the SN1987A constraint certainly makes such a picture improbable - but it is still intrinsically possible. The lightlike model is appealing in that it does not violate Lorentz symmetry in particle interactions, although one would expect Hughes-Drever tests to turn up a violation eventually. Other evasions of the CG constraints are also possible; perhaps, e.g., the neutrino takes a 'short cut' through extra dimensions or suffers anomalous acceleration in matter. Irrespective of the OPERA result, Lorentz-violating interactions remain possible, and ongoing experimental investigation of such possibilities should continue.

None

Technical support is important for all U.S. Department of Energy (DOE) facilities facing difficult technical issues, aggressive remediation schedules, and tight budgets. It is especially vital for closure sites, which typically are smaller and have fewer resources available to apply to remediation activities. In many cases, closure sites and other small sites no longer have staff with the expertise required to overcome technical barriers on their own. As closure deadlines approach, special technical expertise is needed to identify, evaluate, and implement new and innovative approaches that will result in significant cost and schedule improvement for the waste disposition pathway. Site ''problem holders'' must have access to world-class scientific and engineering expertise from DOE national laboratories and research facilities, private industry, and universities to address immediate critical problems. In order to have confidence in the feasibility and results of innovative approaches, site contractors need to have the benefit of the valuable experiences of technicians who have faced similar problems and found solutions. The DOE Environmental Management (EM) Science and Technology (S&T) program recognizes the need of the closure sites to solve problems aggressively and is highly responsive to this need. Technical support from the S&T program can take many forms, such …

The possibility of an intense proton facility, at 'Project X' or elsewhere, will provide many new opportunities for searches for physics beyond the Standard Model. A Project X can serve a yet broader role in the search for new physics, and in this note we highlight the manner in which thus-enabled studies of the flavor structure of the proton, particularly of its intrinsic heavy quark content, facilitate other direct and indirect searches for new physics. Intrinsic heavy quarks in both light and heavy hadrons play a key role in searches for physics BSM with hadrons - and their study at the Intensity Frontier may prove crucial to establishing its existence.

Layered semicrystalline silico-alumino-titanate (Si-Al-Ti) mixed oxides were synthesized by a modified sol-gel method with hydrothermal synthesis temperatures less than 200 C and autogenic pressure. The solid products are semicrystalline materials with a surface area of 136-367 m{sup 2}/g and a monomodal pore size distribution with an average pore diameter of 3.6-4.7 nrn. The catalytic activity for pyrene hydrogenation in a batch reactor at 300 C and 500 psig was determined for sulfided Ni-Mo supported on the Si-Al-Ti mixed oxide. The activity was a function of the support composition the heat treatment before and after loading the active metals, the addition of organic templates, and different methods of metal loading. The most active sulfided Ni-Mo/Si-Al-Ti catalyst has an activity in the same range as the commercial catalyst, Shell 324, but the metal loading is 37% less than the commercial catalyst.

We have studied the spin relaxation in diluted spin ice Ho{sub 2-x} Y{sub x} Ti{sub 2}O{sub 7} by means of neutron spin echo spectroscopy. Remarkably, the geometrical frustration is not relieved by doping with non-magnetic Y, and the dynamics of the freezing is unaltered in the spin echo time window up to x {approx_equal} 1.6. At higher doping with non-magnetic Y (x {ge} 1.6) a new relaxation process at relatively high temperature (up to at least T {approx_equal} 55 K) appears which is more than 10 times faster than the thermally activated main relaxation process. We find evidence that over the whole range of composition all Ho spins participate in the dynamics. These results are compared to a.c. susceptibility measurements of the diluted Ho and Dy spin ice systems. X-ray absorption fine structure (EXAFS) spectra and x-ray diffraction show that the samples are structurally well ordered.

Nickel-Phosphorus alloys are attractive materials for diamond turning applications such as fabrication of large optics and other high precision parts. Although the mechanism is not understood, diamond tool wear is minimized when the phosphorus content of the deposit is greater than 11% (wgt). In recent years, increased attention has been directed at electrodeposition as an alternate to electroless deposition for producing Ni-P alloys. One principal advantage of the electrodeposition process is that alloys with 14--15% P can be obtained; another is that an order of magnitude greater deposition thickness can be provided if necessary. This paper compares diamond turning results for electrodeposited and electroless Ni-P alloys and shows that the electrodeposited coatings provide promising results. 28 refs., 7 figs., 1 tab.

In this kinetic study of (1) the reaction of CH{sub 3} radicals with H{sub 2} and (2) the thermal dissociation of methane, primary product H atoms were monitored directly using the sensitive atomic resonance absorption detection technique. The detection limit for the [H] was about 3{times}10{sup 10} atoms cm{sup {minus}3}. Rate constants for both reactions were obtained under pseudo-first-order conditions. In addition, computer simulations verified that kinetic complications were avoided. For the reaction of CH{sub 3}+H{sub 2}, experiments were performed using either acetone or ethane to generate CH{sub 3} radicals rapidly by thermal dissociation in argon. Twenty-four experiments were performed over the temperature range 1346K to 1793K and a rate constant expression derived using linear least-squares analysis: k{sub {minus}2}(T) = (6.0{plus_minus}0.7){times}10{sup {minus}12} exp ({minus}5920{plus_minus}190K/T) cm{sup 3} molecule{sup {minus}1} s{sup {minus}1}. 46 refs., 5 figs., 5 tabs.

An extensive series of experiments has been conducted on the Nova laser to measure hydrodynamic instabilities in planar foils accelerated by x-ray ablation. Single mode experiments allow a measurement of the fundamental growth rates from the linear well into the nonlinear regime. Two-mode foils allow a first direct observation of mode coupling. Surface-finish experiments allow a measurement of the evolution of a broad spectrum of random initial modes.

This paper describes use of equivalent solid (EQS) modeling to obtain efficient solutions to perforated material problems using three-dimensional finite element analysis (3D-FEA) programs. It is shown that the accuracy of EQS methods in 3D-FEA depends on providing sufficient equivalent elastic properties to allow the EQS material to respond according to the elastic symmetry of the pattern. Peak stresses and ligament stresses are calculated from the EQS stresses by an appropriate 3D-FEA submodel approach. The method is demonstrated on the problem of a transversely pressurized simply supported plate with a central divider lane separating two perforated regions with circular penetrations arranged in a square pattern. A 3D-FEA solution for a model that incorporates each penetration explicitly is used for comparison with results from an EQS solution for the plate. Results for deflection and stresses from the EQS solution are within 3% of results from the explicit 3D-FE model. A solution to the sample problem is also provided using the procedures in the ASME B and PV Code. The ASME B and PV Code formulas for plate deflection were shown to overestimate the stiffening effects of the divider lane and the outer stiffening ring.

We have developed a 10-plexed PCR assay coupled to a 12-plexed liquid bead array to rapidly screen environmental samples for B. anthracis, Y. pestis, F. tularensis, and B. melitensis. Highly validated species -specific primer sets were used to simultaneously amplify multiple diagnostic regions unique to each individual pathogen. Resolution of the mix of amplified products was achieved by PCR product hybridization to corresponding probe sequences, attached to unique sets of fluorescent beads. The hybridized beads were processed through a flow cytometer, which detected presence and quantity of each PCR product. The assay was optimized to allow for maximum sensitivity in a multiplexed format. A high- throughput demonstration was performed where 384 simulated environmental samples were spiked with different amounts of B. thuringensis spores and pathogen DNA. The samples were robotically processed to extract DNA and arrayed for multiplexed PCR-liquid bead detection. The assay correctly identified the presence or absence of each pathogen and collected over 3,000 individual data points within a single 8-hour shift for approximately $1.20 per sample in a 10-plexed assay.

To understand the origin of the spin-glass state in molybdate pyrochlores, the structure of Tb{sub 2}Mo{sub 2}O{sub 7} is investigated using two techniques: the long-range lattice structure was measured using neutron powder diffraction (NPD), and local structure information was obtained from the extended x-ray absorption fine structure (EXAFS) technique. While the long-range structure appears generally well ordered, enhanced mean-squared site displacements on the O(1) site and the lack of temperature dependence of the strongly anisotropic displacement parameters for both the Mo and O(1) sites indicate some disorder exists. Likewise, the local structure measurements indicate some Mo-Mo and Tb-O(1) nearest-neighbor disorder exists, similar to that found in the related spin-glass pyrochlore, Y{sub 2}Mo{sub 2}O{sub 7}. Although the freezing temperature in Tb{sub 2}Mo{sub 2}O{sub 7}, 25 K, is slightly higher than in Y{sub 2}Mo{sub 2}O{sub 7}, 22 K, the degree of local pair distance disorder is actually less in Tb{sub 2}Mo{sub 2}O{sub 7}. This apparent contradiction is considered in light of the interactions involved in the freezing process.

The capability to plot superimposed meshes has been added to MCNP{trademark}. MCNP4C featured a superimposed mesh weight window generator which enabled users to set up geometries without having to subdivide geometric cells for variance reduction. The variance reduction was performed with weight windows on a rectangular or cylindrical mesh superimposed over the physical geometry. Experience with the new capability was favorable but also indicated that a number of enhancements would be very beneficial, particularly a means of visualizing the mesh and its values. The mathematics for plotting the mesh and its values is described here along with a description of other upgrades.

In a well instrumented pulse tube refrigerator having 1,500 W of cooling power at 125 K, the authors have measured the figure of merit of a tapered pulse tube at several operating points. At operating points near the operating point for which the taper was designed, the figure of merit is 0.96. This is close to the theoretical optimum figure of merit 0.97 calculated for this pulse tube considering only two loss mechanisms: heat conduction in the metal pulse tube wall and ordinary thermoacoustic heat transport in the gas within a few thermal penetration depths of the wall. At operating points farther from the design operating point, the measured figure of merit is much lower, as streaming driven convection adds a third loss mechanism.

The dramatic acceleration of erosion associated with the expansion of pinyon-juniper woodlands over the past 100 years has been a widely recognized but poorly understood phenomenon. A more complete understanding will come only through long-term observations of erosion and related factors. To this end, we are conducting a study of a small (1-ha) catchment in a rapidly eroding pinyon-juniper woodland. Since July 1993, we have been collecting data on runoff, erosion, and weather conditions in the catchment, as well as on the topography, soils, and vegetation. Our preliminary results suggest that (1) the catchment is currently in a cycle of accelerated erosion that began concomitant with a shift from ponderosa pine forest to pinyon-juniper woodland that was initiated by a prolonged drought; (2) the intercanopy soils cannot be sustained at the current erosion rates and will be mostly stripped away in about a century; (3) large summer thunderstorms are the most important agents of erosion (4) erosion increases dramatically as the scale increases; (5) runoff makes up <10% of the water budget.

A central question addressed by the VERTIGO (VERtical Transport In the Global Ocean) study was 'What controls the efficiency of particle export between the surface and subsurface ocean'? Here, we present data from sites at ALOHA (N Central Pacific Gyre) and K2 (NW subarctic Pacific) on phytoplankton processes, and relate them via a simple planktonic foodweb model, to subsurface particle export (150-500 m). Three key factors enable quantification of the surface-subsurface coupling: a sampling design to overcome the temporal lag and spatial displacement between surface and subsurface processes; data on the size-partitioning of Net Primary Production (NPP) and subsequent transformations prior to export; estimates of the ratio of algal- to faecal-mediated vertical export flux. At ALOHA, phytoplankton were characterized by low stocks, NPP, F{sub v}/F{sub m} (N-limited), and were dominated by picoplankton. The HNLC waters at K2 were characterized by both two-fold changes in NPP and floristic shifts (high to low proportion of diatoms) between deployment 1 and 2. Prediction of export exiting the euphotic zone was based on size-partitioning of NPP, a copepod-dominated foodweb and a ratio of 0.2 (ALOHA) and 0.1 (K2) for algal:faecal particle flux. Predicted export was 20-22 mg POC m{sup -2} d{sup -1} at ALOHA …

We apply ultrafast single shot interferometry to determine the pressure and density of argon shocked from up to 7.8 GPa static initial pressure in a diamond anvil cell. This method enables the observation of thermodynamic states distinct from those observed in either single shock or isothermal compression experiments, and the observation of ultrafast dynamics in shocked materials. We also present a straightforward method for interpreting ultrafast shock wave data which determines the index of refraction at the shock front, and the particle and shock velocities for shock waves in transparent materials. Based on these methods, we observe shocked thermodynamic states between the room temperature isotherm of argon and the shock adiabat of cryogenic argon at final shock pressures up to 28 GPa.

The thermodynamics and kinetics of the fcc (delta) to monoclinic (alpha-prime) phase transformation and its reversion in a plutonium-gallium alloy have been studied using differential scanning calorimetry, resistometry, and dilatometry. Under ambient conditions, the delta phase is metastable in a Pu-2.0 at% Ga alloy. Thermal cycling to below the ambient temperature results in a partial transformation to the alpha-prime phase; this transformation is composition-invariant and exhibits martensitic behavior. Because this transformation results in an unusually invariant large 25% volume contraction that cannot be fully accommodated by purely elastic adjustments, the transformation mode is expected to involve burst formation of individual alpha-prime particles. However, upon cooling, these individual bursts were not resolved by the above techniques, although signals corresponding to the overall accumulation of many alpha-prime particles were observed. On the other hand, upon heating, signals from differential scanning calorimetry, resistometry, and dilatometry showed a series of discrete changes occurring in periodic increments beginning at approximately 32 C. These features correspond to the cooperative reversion of many alpha-prime particles to the delta phase; they appear to be the result of an interplay between the autocatalytically driven reversion of a cascade of individual martensite units, and self-quenching caused by small changes of …

The following software packages for uncertainty, sensitivity, and decision analysis were reviewed and also tested with several simple analysis problems: Crystal Ball, RiskQ, SUSA-PC, Analytica, PRISM, Ithink, Stella, LHS, STEPWISE, and JMP. Results from the review and test problems are presented. The study resulted in the recognition of the importance of four considerations in the selection of a software package: (1) the availability of an appropriate selection of distributions, (2) the ease with which data flows through the input sampling, model evaluation, and output analysis process, (3) the type of models that can be incorporated into the analysis process, and (4) the level of confidence in the software modeling and results.

A new cryostat cooled by a closed-cycle Cryomech GB-37 cryocooler for superconductor measurements at temperatures down to 20 K is described. The sample is conductively coupled to the cold stage so as to minimize vibration and thermal stresses. AC losses have been measured calorimetrically in several HTSC coils that have been wound to simulate sub-scale transformer winding pairs. Stable temperatures down to 20 K were reached on these coils, allowing measurements at practical levels of ac current and I{sub c}. By using short ac current pulses, losses on individual turns could be resolved. Results are reported mainly to showcase the apparatus, measurement procedure and analytical approach.

A mathematical model intended to study the one-dimensional transport of radionuclides in a non-homogeneous soil system under saturated-unsaturated and isothermal conditions is presented. The model is composed of two modules: the first to calculate the pressure distribution enabling one to compute velocities and soil moisture; the second to calculate the migration of species by considering the major processes associated with the transport phenomena of a dissolved substance in porous media, i.e., advection, mechanical dispersion, molecular diffusion, radioactive decay, and sorption, assuming a linear equilibrium isotherm. The numerical method of solving both flow and solute equations used here is the finite-element method based on the weighted residual technique. The flow equation is solved by the Bubnov-Galerkin method. The solute equation is solved by a Petrov-Galerkin type method. The model allows for a variety of boundary conditions; e.g., infiltration, drainage and/or evaporation. A test case involving the movement of a non-reacting ionic species is used to validate the model. Use of the model is illustrated by the analysis of the movement Sr-90 and Cs-137 and H-3 (as water) from a low-level solid-waste disposal trench subject to a steady rate of rainfall.

None

Papers presented are grouped under the following topics: air cleaning; waste volume reduction and preparation for storage; tritium, carbon-14, ozone; containment of accidental releases; adsorbents and absorbents; and off-gas treatment. A separate abstract was prepared for each paper.

This six-volume report contains 140 papers out of the 164 that were presented at the Fifteenth Water Reactor Safety Information Meeting held at the National Bureau of Standards, Gaithersburg, Maryland, during the week of October 26-29, 1987. The papers are printed in the order of their presentation in each session and describe progress and results of programs in nuclear safety research conducted in this country and abroad. This report, Volume 6, discusses decontamination and decommissioning, accident management, and the Three Mile Island-2 reactor accident. Thirteen reports have been cataloged separately.