Atomic hydrogen is a very important constituent for processes ranging from cleaning oxide from GaAs and annealing amorphous silicon to the deposition of diamond. Because the usual techniques for measuring atomic fraction are either expensive and cumbersome to use, or unsuitable for application to highly dissociated hydrogen, a specially designed sensor was developed. Sensor design is based on a diffusion tube with noncatalytic walls, having one end open to the atom source and a catalytic closure at the other end. The sensor is simple and inexpensive to fabricate, and determining atom density is straightforward. Sensor design also inhibits thermal runaway, which occurs when atom density is high enough to impart enough recombination energy to the non-catalytic surface to substantially raise its temperature. While recombination coefficients for such surfaces are very low near room temperature, they increase nearly exponentially with temperature unless actively cooled. With the use of a straightforward calibration scheme to determine the variation in species fraction along the diffusion tube, the atomic fraction at the tube opening is determined. Design strategy, implementation considerations, and calibration method are presented. In addition, data obtained from an atomic hydrogen source are compared to relevant published data.

N/A

N/A

The method of cells has been extended to include damage or debonding between all adjacent subcells using a finite element formulation for the original cells assembly. Damage is implemented by placing a nonlinear three-dimensional spring between adjacent subcells. With this arrangement the damage is inherently anisotropic. The ``nonlinear substructure`` cells finite element model is incorporated as a user defined material routine in a general purpose finite element code. The primary motivation for casting the method of cells as a finite element assemblage is to provide a composite constitutive model that facilitates the incorporation of various constituent material models, as well as any level of detail desired in the microstructure geometry. At present, the constituent material models may be anisotropic elastic or isotropic viscoelastic-plastic, while damage evolution is based on the macroscopic strain. The capability of the model is demonstrated through analyses of some simple structures loaded to failure.

None

This is the final report of a five-month, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The authors performed a preliminary design study to explore the plausibility of using pulse-tube refrigeration to cool instruments in a hot down-hole environment for the oil and gas industry or geothermal industry. They prepared and distributed a report showing that this appears to be a viable technology.

Four well-defined indium-dopant/lattice-defect complexes and the non-complexed substitutional indium dopant have been observed by perturbed angular correlation (PAC) spectroscopy in cerium oxide. PAC is a nuclear hyperfine experimental method that detects interactions between a radioactive probe nucleus and nearby atoms. The magnitude and symmetry of those interactions provide a signature for the electromagnetic fields at the probe nucleus. These fields are produced by the arrangement of charges and magnetic moments in the near environment of the probe, so they provide a means of identifying defect structures.

The geologic and tectonic setting and geology of Sulphur Springs Area are described. Geologic faults, sheared or brecciated rock, volcanic vents, geothermal wells, hydrothermal alteration, springs, thermal springs, fumaroles, and geologic deposits are indicated on the map. (MHR)

p-Process modeling of some rare but stable proton-rich nuclei requires knowledge of a variety of neutron, charged particle, and photonuclear reaction rates at temperatures of 2 to 3 {times} 10{sup 9} {degrees}K. Detailed balance is usually invoked to obtain the stellar photonuclear rates, in spite of a number of well-known constraints. In this work we attempt to calculate directly the stellar rates for ({gamma},n) and ({gamma},{alpha}) reactions on {sup 151}Eu. These are compared with stellar rates obtained from detailed balance, using the same input parameters for the stellar (n,{gamma}) and ({alpha},{gamma}) reactions on {sup 150}Eu and {sup 147}Pm, respectively. The two methods yielded somewhat different results, which will be discussed along with some sensitivity studies. 16 refs., 7 figs.

N/A

Hydrous metal oxide (HMO) materials are inorganic ion exchangers which have many desirable characteristics for catalyst support applications, including high cation exchange capacity, anion exchange capability, high surface area, ease of adjustment of acidity and basicity, bulk or thin film preparation, and similar chemistry for preparation of various transition metal oxides. Cation exchange capacity is engineered into these materials through the uniform incorporation of alkali cations via manipulation of alkoxide chemistry. Specific examples of the effects of Na stoichiometry and the addition of SiO{sub 2} to hydrous titanium oxide (HTO) on ion exchange behavior will be given. Acid titration and cationic metal precursor complex exchange will be used to characterize the ion exchange behavior of these novel materials.

A potentially attractive flue gas desulfurization method called Limestone Emission Control (LEC) is currently being investigated by Prudich at Ohio University. In this process, beds of 1/8 inch limestone gravel particles absorb sulfur dioxide from flue gas. This forms sulfite and sulfate salts which coat limestone, blinding the surface and limiting utilization to 20%. Favorable economics can be generating when the unreacted portion of the limestone is recovered by mechanical grinding. This project is a wet method for grinding and recovering the spent limestone from the LEC process, utilizing an impeller fluidizer, a new type of slurry processor. It consists of a cylindrical vessel with an impeller at one end. The impeller generates sufficient pressure head to serve as a slurry pump. It combines the operation of wet grinding, washing, and transporting the spent and recovered limestone as an aqueous slurry. The objectives of the first two years were to operate fluidizer in a batch mode to carry grinding experiments, and to determine the removal of the sulfur coatings from the limestone when operating the fluidizer in a continuous mode. The main thrusts of the third year were to complete the grinding data and coordinate the data with reactivity determinations …

Two new concepts are being developed as possible upgrades to the folded waveguide launcher. The folded stripline is a folded waveguide with an additional conductor positioned inside. The term stripline refers to the resemblance of the design to microwave microstrip line. The conductor provides support for TEM mode propagation, which eliminates cutoff and the nonlinear frequency dependence of the waveguide impedance and phase velocity. A natural extension to the folded stripline is the stacked stripline, which comprises several stacked, independent TEM waveguides. Initial measurements indicate that both concepts have better magnetic flux coupling than the folded waveguide.

None

This report summarizes a preliminary design study to explore the plausibility of using pulse tube refrigeration to cool instruments in a hot down-hole environment. The original motivation was to maintain Dave Reagor`s high-temperature superconducting electronics at 75 K, but the study has evolved to include three target design criteria: cooling at 30 C in a 300 C environment, cooling at 75 K in a 50 C environment, cooling at both 75 K and 30 C in a 250 C environment. These specific temperatures were chosen arbitrarily, as representative of what is possible. The primary goals are low cost, reliability, and small package diameter. Pulse-tube refrigeration is a rapidly growing sub-field of cryogenic refrigeration. The pulse tube refrigerator has recently become the simplest, cheapest, most rugged and reliable low-power cryocooler. The authors expect this technology will be applicable downhole because of the ratio of hot to cold temperatures (in absolute units, such as Kelvin) of interest in deep drilling is comparable to the ratios routinely achieved with cryogenic pulse-tube refrigerators.

Dilute indium dopants in cerium oxides and YBa{sub 2}Cu{sub 3}O{sub x} have been studied by{sup 111}In/Cd Perturbed Angular Correlation (PAC) spectroscopy. By controlling oxygen vacancy concentration in the cerium oxides through doping or high-temperature vacuum annealing, we have found that indium always forms a defect complex unless the sample is doped to reduce greatly the oxygen vacancy concentration. Three different vacancy-associated complexes are found with concentrations that depend on doping and oxygen stoichiometry. Another defect complex occurs in samples having negligible vacancy concentration. At low temperatures, evidence is found of interaction with an electronic hole trapped by {sup 111}Cd after the radioactive decay of the {sup 111}In parent. In YBa{sub 2}Cu{sub 3}O{sub x} the indium substitutes preferentially at the Y site but has measurable probability of substitution in at least one of the two copper sites. A symmetry change near 650 {degree}C is consistent with the well-documented orthorhombic/tetragonal transition for samples in air or oxygen.

We present data that elucidate the stratigraphy, geomorphology, and structure in the western part of Los Alamos National Laboratory between Technical Areas 3 and 16 (TA-3 and TA-16). Data include those gathered by geologic mapping of surficial, post-Bandelier Tuff strata, conventional and high-precision geologic mapping and geochemical analysis of cooling units within the Bandelier Tuff, logging of boreholes and a gas pipeline trench, and structural analysis using profiles, cross sections, structure contour maps, and stereographic projections. This work contributes to an improved understanding of the paleoseismic and geomorphic history of the area, which will aid in future seismic hazard evaluations and other investigations. The study area lies at the base of the main, 120-m (400-ft) high escarpment formed by the Pajarito fault, an active fault of the Rio Grande rift that bounds Los Alamos National Laboratory on the west. Subsidiary fracturing, faulting, and folding associated with the Pajarito fault zone extends at least 1,500 m (5,000 ft) to the east of the main Pajarito fault escarpment. Stratigraphic units in the study area include upper units of the Tshirege Member of the early Pleistocene Bandelier Tuff, early Pleistocene alluvial fan deposits that predate incision of canyons on this part of the …

In constructing the model, creating variable names, and linking the model to the Monte Carlo program various naming conventions have been used. These appendices attempt to provide a concise, useful guide linking conceptual variable to model variable to Monte Carlo variables designations. Tables give the basic characteristics of the output distributions for each of the 95 output VALs. These appendices describe in technical detail the Monte Carlo techniques used in the uncertainty analysis. The choice of Latin Hypercube sampling and the methodology employed to attribute output variability to input uncertainty is documented. A complete listing of the software and data base used to generate the Monte Carlo analysis is included.

Appendix A contains the Monte Carlo Data Set. The data sheets give the distribution for input variables used in Monte Carlo analysis of the IEA/ORAU Global Energy, CO{sub 2} Model. The data sheets include a discussion of data sources, bibliographic sources, and other considerations used in developing the particular data format and values for distributions. As much detail as possible about how distributions are related to published estimates is given but in most cases it was necessary to make a significant leap from available data to the quantified distribution. The distributions are meant to be roughly accurate and to the degree that uncertainty exists about the form and value of distributions, the authors have tended to opt for wider bounds. Appendix B contains The IEA/ORAU Long-Term Global Energy-CO{sub 2} Model, Version A.84 -- Model Improvements. The model was originally developed in 1982 in support of work conducted for the US Department of Energy Carbon Dioxide Research Division in the area of future global fossil fuel related CO emissions research. The uncertainty analysis, documented in this report, made demands on the model that had not previously been made, and in the process of operating the model much was learned about areas …

The harmonic content of magnetic field imperfections in the AGS Booster has been determined through careful measurements of the required field corrections of transverse resonances. An analysis of the required correction yielded amplitude and phase information which points to possible sources of imperfections. Dipole and quadrupole imperfections, which are proportional to the field of bending magnets (B), are mainly driven by any misalignment of the magnets. Quadrupole and sextupole imperfections, which are proportional to dB/dt, are driven by imperfections of the eddy-current correction system. The observations also suggest the presence of a remnant field.

The processing of materials using rf and/or microwave power is a broad area that has grown significantly in the past few years. The authors have applied rf and microwave technology in the areas of ceramic sintering, plasma processing, and waste processing. The sintering of ceramics in the frequency range of 50 MHz-28 GHz has lead to unique material characteristics compared to materials that have been sintered conventionally. It has been demonstrated that sintering can be achieved in a variety of materials, including alumina, zirconia, silicon carbide, and boron carbide. In the area of plasma processing, progress has been made in the development and understanding of high density plasma sources, including inductively coupled plasma (ICP) sources. The effects of processing conditions on the ion energy distribution at the substrate surface (a critical processing issue) have been determined for a variety of process gases. The relationship between modeling and experiment is being established. Microwave technology has also been applied to the treatment of radioactive and chemical waste. The application of microwaves to the removal of contaminated concrete has been demonstrated. Details of these programs and other potential application areas are discussed.

The proposed "catalytic membrane sensor" (CMS) was developed to generate a device which would selectively identify a specific reagent in a complex mixture of gases. This was to be accomplished by modifying an existing Hz sensor with a series of thin films. Through selectively sieving the desired component from a complex mixture and identifying it by decomposing it into Hz (and other by-products), a Hz sensor could then be used to detect the presence of the select component. The proposed "sandwich-type" modifications involved the deposition of a catalyst layered between two size selective sol-gel layers on a Pd/Ni resistive Hz sensor. The role of the catalyst was to convert organic materials to Hz and organic by-products. The role of the membraneo was to impart both chemical specificity by molecukir sieving of the analyte and converted product streams, as well as controlling access to the underlying Pd/Ni sensor. Ultimately, an array of these CMS elements encompassing different catalysts and membranes were to be developed which would enable improved selectivity and specificity from a compiex mixture of organic gases via pattern recognition methodologies. We have successfully generated a CMS device by a series of spin-coat deposited methods; however, it was determined that …

Addition of hydroperoxy-alkyl radicals to molecular oxygen leads to chain branching in autoignition and engine knock, and in low temperature oxidation of paraffins. Rate constants and product channels for reaction of hydroperoxy-propyl radicals with O{sub 2} are estimated using thermodynamic properties, bimolecular quantum Kassel analysis and transition state theory. Thermochemistry of relevant molecules and radicals is estimated using group additivity and bond dissociation groups for radicals. Results show that rates of the hydroperoxy-propyl radical addition to O{sub 2} are near their high pressure limits at {ge} 1 atm. Main products at 1--15 atm are stabilization, reverse reaction to hydroperoxy-propyl + O{sub 2} and alkyl carbonyl + OH. Reactions of the stabilized adducts, dissociation rates and product channels are estimated using unimolecular quantum Kassel analysis, because stabilization is the most important hydroperoxy-propyl radical + O{sub 2} product channel. Below 700 K, the stabilized peroxy adducts react primarily to hydroperoxy-carbonyl + OH, products which lead to chain branching. Above 700K, the stabilized peroxy adducts react primarily to hydroperoxy-propyl radical + O{sub 2}, initial reactants, which inhibits the overall oxidation. This switchover in channels correlates well observed negative temperature coefficient behavior for propane oxidation. Rate expressions for reaction of each of the three …

A large number of GE techniques can be adapted from other microorganisms to biothreat bacteria and viruses. Detection of GE in a microorganism increases in difficulty as the size of the genetic change decreases. In addition to the size of the engineered change, the consensus genomic sequence of the microorganism can impact the difficulty of detecting an engineered change in genomes that are highly variable from strain to strain. This problem will require comprehensive databases of whole genome sequences for more genetically variable biothreat bacteria and viruses. Preliminary work with microarrays for detecting synthetic elements or virulence genes and analytic bioinformatic approaches for whole genome sequence comparison to detect genetic engineering show promise for attacking this difficult problem but a large amount of future work remains.