Requirements of minimum beam loss for hand-on maintenance and flexibility for future operations are essential for the lattice design of the Spallation Neutron Source (SNS) accumulator ring. In this paper, we present a hybrid lattice that consists of FODO arcs and doublet straights, emphasizing injection and collimation optimization and flexibility, split tunes for coupling control, sextupole families for chromaticity control, and compatibility to future upgrades.

The Eolus ASCI project includes parallel, 3-D transport simulation for various nuclear applications. The codes developed within this project provide neutral and charged particle transport, detailed interaction physics, numerous source and tally capabilities, and general geometry packages. One such code is MCNPW which is a general purpose, 3-dimensional, time-dependent, continuous-energy Monte Carlo fully-coupled N-Particle transport code. Significant advances are also being made in the areas of modern software engineering and parallel computing. These advances are described in detail.

None

During the g-2 run at the BNL AGS in early 2000, a 200 MeV storage-ring-like magnetic cycle has been set-up and tuned at the Booster in preparing for the Spallation Neutron Source (SNS) accumulator ring study. In this article, we report the progress of the machine set-up, tuning, some preliminary studies, and the future plan.

The RELAP5-3D (version bt) computer program was used to assess a GE level swell experiment. The primary goal of the new assessment models was to faithfully represent the experimental facility and instrumentation. In developing the new models, a non-physical representation of the vessel heads in a previous assessment was found. This distortion resulted in predictions that closely matched the experimental data, but were in error. The new assessment also highlighted an instability in the calculation of interfacial drag. To explore this issue, analyses were performed using three different interfacial drag correlations appropriate for large diameter pipes and/or vessels. The results of this study show that the Kataoka-Ishii correlation, which is currently used in RELAP5-3D, compares most favorably with the experimental data. Additionally, a numerical instability was uncovered with the analysis performed using the Gardner correlation and was traced to the calculation of bubble diameter in the bubbly flow regime.

This paper summarizes physical and engineering issues of high-intensity synchrotrons and accumulators, and discusses future applications and outlook.

None

None

The atomic process, kinetics, and equilibrium thermodynamics underlying the gettering of transition-metal impurities in Si are reviewed from a mechanistic perspective. Methods for mathematical modeling of gettering are reviewed and illustrated. Needs for further research are discussed.

The weight window variance reduction method in the general-purpose Monte Carlo N-Particle radiation transport code MCNPTM has recently been rewritten. In particular, it is now possible to generate weight window importance functions on a superimposed mesh, eliminating the need to subdivide geometries for variance reduction purposes. Our assessment addresses the following questions: (1) Does the new MCNP4C treatment utilize weight windows as well as the former MCNP4B treatment? (2) Does the new MCNP4C weight window generator generate importance functions as well as MCNP4B? (3) How do superimposed mesh weight windows compare to cell-based weight windows? (4) What are the shortcomings of the new MCNP4C weight window generator? Our assessment was carried out with five neutron and photon shielding problems chosen for their demanding variance reduction requirements. The problems were an oil well logging problem, the Oak Ridge fusion shielding benchmark problem, a photon skyshine problem, an air-over-ground problem, and a sample problem for variance reduction.

The pixel purity index (PPI) algorithm proposed by Boardman, et al.1 identifies potential endmember pixels in multispectral imagery. The algorithm generates a large number of skewers (unit vectors in random directions), and then computes the dot product of each skewer with each pixel. The PPI is incremented for those pixels associated with the extreme values of the dot products. A small number of pixels (a subset of those with the largest PPI values) are selected as pure and the rest of the pixels in the image are expressed as linear mixtures of these pure endmembers. This provides a convenient and physically-motivated decomposition of the image in terms of a relatively few components. We report on a variant of the PPI algorithm in which blocks of B skewers are considered at a time. From the computation of B dot products, one can produce a much larger set of derived dot products that are associated with skewers that are linear combinations of the original B skewers. Since the derived dot products involve only scalar operations, instead of full vector dot products, they can be very cheaply computed. We will also discuss a hardware implementation on a field programmable gate array (FPGA) processor …

None

Reliably processing, imaging, and interpreting seismic data from areas with complicated structures, such as sub-salt, requires a thorough understanding of elastic as well as acoustic wave propagation. Elastic numerical modeling is an essential tool to develop that understanding. While 2-D elastic modeling is in common use, 3-D elastic modeling has been too computationally intensive to be used routinely. Recent advances in computing hardware, including commodity-based hardware, have substantially reduced computing costs. These advances are making 3-D elastic numerical modeling more feasible. A series of example 3-D elastic calculations were performed using a complicated structure, the SEG/EAGE salt structure. The synthetic traces show that the effects of shear wave propagation can be important for imaging and interpretation of images, and also for AVO and other applications that rely on trace amplitudes. Additional calculations are needed to better identify and understand the complex wave propagation effects produced in complicated structures, such as the SEG/EAGE salt structure.

In this article the authors concisely present several modern strategies that are applicable to drift-dominated carrier transport in higher-order deterministic models such as the drift-diffusion, hydrodynamic, and quantum hydrodynamic systems. The approaches include extensions of upwind and artificial dissipation schemes, generalization of the traditional Scharfetter-Gummel approach, Petrov-Galerkin and streamline-upwind Petrov Galerkin (SUPG), entropy variables, transformations, least-squares mixed methods and other stabilized Galerkin schemes such as Galerkin least squares and discontinuous Galerkin schemes. The treatment is representative rather than an exhaustive review and several schemes are mentioned only briefly with appropriate reference to the literature. Some of the methods have been applied to the semiconductor device problem while others are still in the early stages of development for this class of applications. They have included numerical examples from the recent research tests with some of the methods. A second aspect of the work deals with algorithms that employ unstructured grids in conjunction with adaptive refinement strategies. The full benefits of such approaches have not yet been developed in this application area and they emphasize the need for further work on analysis, data structures and software to support adaptivity. Finally, they briefly consider some aspects of software frameworks. These include dial-an-operator approaches …

More than a decade after the explosion of SN 1987A, unresolved discrepancies still remain in attempts to numerically simulate the mixing processes initiated by the passage of a very strong shock through the layered structure of the progenitor star. Numerically computed velocities of the radioactive {sup 56}Ni and {sup 56}CO, produced by shock-induced explosive burning within the silicon layer for example, are still more than 50% too low as compared with the measured velocities. In order to resolve such discrepancies between observation and simulation, an experimental testbed has been designed on the Omega Laser for the study of hydrodynamic issues of importance to supernovae (SNe). In this paper, we present results from a series of scaled laboratory experiments designed to isolate and explore several issues in the hydrodynamics of SN explosions. The results of the experiments are compared with numerical simulations and are generally found to be in reasonable agreement.

None

None

None

The preheating of laser-heated microballoon targets has been measured by time-resolved x-ray and extreme ultraviolet (euv) spectroscopy on the 30 kJ, 351 nm, 60-beam laser-fusion system at the University of Rochester Laboratory for Laser Energetics. Thin coatings of aluminum overcoated with magnesium served as indicators. both the sequence of the x-ray line emission and the intensity of euv radiation were used to determine a preheating peaking at {approx} 10 ns prior to onset of the main laser pulse, with a power density {approx_equal}1% of the main pulse. The measurements are supported by numerical modeling. Further information is provided by absorption spectra from the aluminum coating, backlighted by continuum from the heated surface. The exact source of the preheating energy remains unknown at present, but most likely arrives from early laser leakage through the system. The present target diagnostic is particularly useful when all beams cannot be monitored directly at all laser wavelengths.

The authors evaluated the sensitivity of a habitat model and a source-sink population model to spatial uncertainty in landscapes with different statistical properties and for hypothetical species with different habitat requirements. Sequential indicator simulation generated alternative landscapes from a source map. Their results showed that spatial uncertainty was highest for landscapes in which suitable habitat was rare and spatially uncorrelated. Although, they were able to exert some control over the degree of spatial uncertainty by varying the sampling density drawn from the source map, intrinsic spatial properties (i.e., average frequency and degree of spatial autocorrelation) played a dominant role in determining variation among realized maps. To evaluate the ecological significance of landscape variation, they compared the variation in predictions from a simple habitat model to variation among landscapes for three species types. Spatial uncertainty in predictions of the amount of source habitat depended on both the spatial life history characteristics of the species and the statistical attributes of the synthetic landscapes. Species differences were greatest when the landscape contained a high proportion of suitable habitat. The predicted amount of source habitat was greater for edge-dependent (interior) species in landscapes with spatially uncorrelated(correlated) suitable habitat. A source-sink model demonstrated that, although …

Magnesium aryloxides were prepared in a variety of solvents through the reaction of dibutyl magnesium with sterically varied aryl alcohols: 2,6-dimethylphenol (H-DMP), 2,6-diisopropylphenol (H-DIP), and 2,4,6-trichlorophenol (H-TCP). Upon using a sufficiently strong Lewis-basic solvent, the monomeric species Mg(DMP){sub 2}(py){sub 3} (1, py = pyridine), Mg(DIP){sub 2}(THF){sub 3}, (2a, THF = tetrahydrofuran) Mg(TCP){sub 2}(THF){sub 3} (3) were isolated. Each of these complexes possesses a five-coordinate magnesium that adopts a trigonal bipyramidal geometry. In the absence of a Lewis base, the reaction with H-DIP yields a soluble trinuclear complex, [Mg(DIP){sub 2}]{sub 3} (2b). The Mg metal centers in 2b adopt a linear arrangement with a four-coordinate central metal while the outer metal centers are reduced to just three-coordinate. Solution spectroscopic methods suggest that while 2b remains intact, the monomeric species (1, 2a, and 3) are involved in equilibria, which facilitate intermolecular ligand transfer.

Iron ions provide many valuable plasma diagnostics for cosmic plasmas. The accuracy of these diagnostics, however, often depends on an accurate understanding of the ionization structure of the emitting gas. Dielectronic recombination (DR) is the dominant electron-ion recombination mechanism for most iron ions in cosmic plasmas. Using the heavy-ion storage ring at the Max-Planck-Institute for Nuclear Physics in Heidelberg, Germany, we have measured the low temperature DR rates for Fe{sup q+} where q = 15, 17, 18, and 19. These rates are important for photoionized gases which form in the media surrounding active galactic nuclei, X-ray binaries, and cataclysmic variables. Our results demonstrate that commonly used theoretical approximations for calculating low temperature DR rates can easily under- or over-estimate the DR rate by a factor of {approx} 2 or more. As essentially all DR rates used for modeling photoionized gases are calculated using these approximations, our results indicate that new DR rates are needed for almost all charge states of cosmically abundant elements. Measurements are underway for other charge states of iron.

A model of energy gain induced by fast ignition of thermonuclear burn in compressed deuterium-tritium fuel, is used to show the potential for 300x gain with a driver energy of 1 M J, if the National Ignition Facility (NIF) were to be adapted for fast ignition. The physics of fast ignition has been studied using a petawatt laser facility at the Lawrence Livermore National Laboratory. Laser plasma interaction in a preformed plasma on a solid target leads to relativistic self-focusing evidenced by x-ray images. Absorption of the laser radiation transfers energy to an intense source of relativistic electrons. Good conversion efficiency into a wide angular distribution is reported. Heating by the electrons in solid density CD{sub 2} produces 0.5 to 1/keV temperature, inferred from the D-D thermo-nuclear neutron yield.

Welcome to this symposium which is part of the ongoing effort to prepare an Environmental Impact Statement (EIS) regarding mountaintop mining and valley fills. The EIS is being prepared by the U.S. Environmental Protection Agency, U.S. Army Corps of Engineers, U.S. Office of Surface Mining, and U.S. Fish and Wildlife Service, in cooperation with the State of West Virginia. Aquatic Ecosystem Enhancement (AEE) at mountaintop mining sites is one of fourteen technical areas identified for study by the EIS Interagency Steering Committee. Three goals were identified in the AEE Work Plan: 1. Assess mining and reclamation practices to show how mining operations might be carried out in a way that minimizes adverse impacts to streams and other environmental resources and to local communities. Clarify economic and technical constraints and benefits. 2. Help citizens clarify choices by showing whether there are affordable ways to enhance existing mining, reclamation, mitigation processes and/or procedures. 3. Ide identify data needed to improve environmental evaluation and design of mining projects to protect the environment. Today’s symposium was proposed in the AEE Team Work Plans but coordinated planning for the event began September 15, 1999 when representatives from coal industry, environmental groups and government regulators met …